The MBR (Master Boot Record) resides on the first sector of the disk and is where control is passed to by the machine BIOS.
The MBR will be different from operating system to operating system, and each operating system will have a way of writing its own MBR.
For example, in Windows
(google that for syntax) will write an MBR and on Solaris the
command will write an MBR.
If an MBR exists at all when the disk comes from the factory, that will just be from the manufacturing test process and probably won't be what you need for your O/S. When the O/S install routine runs it will install its MBR.
Will some one tell me what this means.
"warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20."
I'm running SCO 505 on a proliant 1600r.
Thnank you in advance. (3 Replies)
I need to make it possible to automatically copy files from an external usb hard drive to a directory when i plug it in....if you can point me in the right direction, i would be very grateful....thanks a lot. :confused: (0 Replies)
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives... (2 Replies)
Version: solaris 10 x86
I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac.
I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there... (2 Replies)
Folks;
I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version.
Is there a command i can use to add the new space or even see if the system can sees them? (3 Replies)
Looking for some clues on how to set my internal hard drives inaccessible/busy to clonezilla. Noprobe doesn't work in startup and the drive is still found.
I know I can find all hard drives using the following:
sudo fdisk -l | grep GB | awk '{print $2}' | grep -Po "^+(?=:?)"
I tried... (9 Replies)
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot... (7 Replies)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Hi,
I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa?
Thank you. (5 Replies)
Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i... (5 Replies)
Discussion started by: cptkirkh
5 Replies
LEARN ABOUT DEBIAN
acorn-fdisk
FDISK(8) BSD System Manager's Manual FDISK(8)NAME
acorn-fdisk -- partition editor for Acorn/RISC OS machines
SYNOPSIS
acorn-fdisk -h | --help | -v | --version
acorn-fdisk [-t scheme | --type scheme] -l | --list [device ...]
acorn-fdisk [-t scheme | --type scheme] -s | --size partition
acorn-fdisk [-t scheme | --type scheme] [device]
DESCRIPTION
The acorn-fdisk utility allows one to display or interactively edit partition tables for Acorn/RISC OS machines in various formats. Using
the PC/BIOS format, standard IBM PC (i386) partition tables can also be accessed. When no optional device is given, it defaults to /dev/hda
or /dev/sda.
The options are as follows:
-h | --help Display a short usage and exit immediately.
-l | --list Display the partition table(s) of all devices.
-s | --size Display the size of partition.
-t | --type Select the partitioning scheme to use. Valid schemes are:
EESOX Eesox SCSI on the Acorn machines.
ICSIDEFS ICS IDE.
Filecore/Linux Linux on Filecore. This uses the non-ADFS descriptor to point to the start of the disc to be partitioned. The
first two sectors contain a partition table to identify the Linux partitions contained within.
PC/BIOS PC/BIOS partitioning scheme. This consists of a partition table in the first sector of the disk which contains
both CHS and LBA values for the partitions. There can be up to four entries in the primary partition table.
One of these can be an extended partition containing up to four extra partitions.
PowerTec PowerTec SCSI on the Acorn machines.
Filecore/RISCiX RiscIX on Filecore.
-v | --version
Display the version of acorn-fdisk and exit immediately.
If neither -l | --list or -s | --size are given, the partition table of the given device will be edited interactively.
EXAMPLES
Display the default device's partition table on a PC:
acorn-fdisk --type PC/BIOS -l
Display the PC partition table of /dev/sda:
acorn-fdisk --type PC/BIOS --list /dev/sda
Display the size in blocks of the partition /dev/sda1:
acorn-fdisk --type PC/BIOS --size /dev/sda1
Edit the MBR partition table interactively:
acorn-fdisk --type PC/BIOS
Display the partition table of an MBR backed up to a file:
acorn-fdisk -t PC/BIOS -l mbrdump.bin
Display the size of the first partition on a device where the MBR would be restored from the backup file mbrdump.bin:
acorn-fdisk -t PC/BIOS -s mbrdump.bin1
AUTHORS
arm-fdisk was written by Russell King <rmk@arm.uk.linux.org> based on util-linux fdisk, which was written at least partially by
A. V. Le Blanc <LeBlanc@mcc.ac.uk>.
This manual page was written for the Debian system by
Thorsten Glaser <tg@debian.org> but may be used by others.
BSD October 2, 2010 BSD