Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Hi,
Is there are any special preocedure for extending veritas mirror-stripe volume? In my case , volume lay out looks as below
v test - ENABLED ACTIVE 419430400 SELECT - fsgen
pl test-01 test ENABLED ACTIVE 419454720 STRIPE 3/128 RW
sd... (0 Replies)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Hi All,
We are using Solaris 10 x86, and Veritas Storage Foundation Software version 6.0.1 and faced the following issues after mirroring and during boot from mirror.
1) VTOC has been changed after mirroring the rootdisk with this command - " /opt/VRTS/bin/vxrootmir <disk to be mirrored>".... (0 Replies)
I have modified a script to do a circular DNS look up.
The theory is this
for a given subnet build a range if IP's
do a reverse look up on those IP's
take the output of the reverse look up then and do a forward look up
If the returns match up give a good status
If not return a fail... (1 Reply)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Hi
I write below script to show if expected file exist in /etc/library/ , print success else failed. But it will print full path I just need to print module name in output. And if it possible show time that spent to compile each module.
FYI 1: First run another script just go to the paths... (1 Reply)
Discussion started by: indeed_1
1 Replies
LEARN ABOUT DEBIAN
parallel-scp
PARALLEL-SCP(1)PARALLEL-SCP(1)NAME
parallel-scp - parallel versions of scp
SYNOPSIS
parallel-scp [OPTIONS] -h hosts.txt local remote
DESCRIPTION
pssh provides a number of commands for executing against a group of computers, using SSH. It's most useful for operating on clusters of
homogenously-configured hosts.
parallel-scp copy files in parallel to a set of machines.
OPTIONS -r --recursive
recusively copy directories (OPTIONAL)
-h --hosts
hosts file (each line "host[:port] [user]")
-l --user
username (OPTIONAL)
-p --par
max number of parallel threads (OPTIONAL)
-o --outdir
output directory for stdout files (OPTIONAL)
-e --errdir
output directory for stderr files (OPTIONAL)
-t --timeout
timeout (secs) (-1 = no timeout) per host (OPTIONAL)
-O --options
SSH options (OPTIONAL)
-v --verbose
turn on warning and diagnostic messages (OPTIONAL)
EXAMPLE
The following example runs hostname on three machines (IPs or hostnames) specified in the file ips.txt using login irb2 and saves the
output in /tmp/foo.
# parallel-scp -h ips.txt -l irb2 /etc/hosts /tmp/hosts
Success on 128.112.152.122:22
Success on 18.31.0.190:22
Success on 128.232.103.201:22
ENVIRONMENT
All four programs take similar sets of options. All of these options can be set using the following environment variables:
o PSSH_HOSTS
o PSSH_USER
o PSSH_PAR
o PSSH_OUTDIR
o PSSH_VERBOSE
o PSSH_OPTIONS
SEE ALSO parallel-ssh(1), parallel-slurp(1), parallel-nuke(1), parallel-rsync(1), ssh(1), scp(1),
AUTHOR
Brent N. Chun <bnc@theether.org>
COPYING
Copyright: 2003, 2004, 2005, 2006, 2007 Brent N. Chun
NOTES
1. bnc@theether.org
mailto:bnc@theether.org
03/30/2009 PARALLEL-SCP(1)