Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Hi,
Is there are any special preocedure for extending veritas mirror-stripe volume? In my case , volume lay out looks as below
v test - ENABLED ACTIVE 419430400 SELECT - fsgen
pl test-01 test ENABLED ACTIVE 419454720 STRIPE 3/128 RW
sd... (0 Replies)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Hi All,
We are using Solaris 10 x86, and Veritas Storage Foundation Software version 6.0.1 and faced the following issues after mirroring and during boot from mirror.
1) VTOC has been changed after mirroring the rootdisk with this command - " /opt/VRTS/bin/vxrootmir <disk to be mirrored>".... (0 Replies)
I have modified a script to do a circular DNS look up.
The theory is this
for a given subnet build a range if IP's
do a reverse look up on those IP's
take the output of the reverse look up then and do a forward look up
If the returns match up give a good status
If not return a fail... (1 Reply)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Hi
I write below script to show if expected file exist in /etc/library/ , print success else failed. But it will print full path I just need to print module name in output. And if it possible show time that spent to compile each module.
FYI 1: First run another script just go to the paths... (1 Reply)
Discussion started by: indeed_1
1 Replies
LEARN ABOUT HPUX
vximportdg
vximportdg(1M)vximportdg(1M)NAME
vximportdg - import a disk group into the Veritas Volume Manager configuration
SYNOPSIS
vximportdg daname new_dgname
DESCRIPTION
The vximportdg utility performs a temporary import of the disk group contained on the disk device specified by daname to the disk group
specified by new_dgname. As the persistent disk group information is not changed within the private partition of the affected disk, the
import is only valid for the duration of the bootload or until a vxdg deport is performed.
ARGUMENTS
daname Specifies the device name (disk access name) of one of the member disks of the disk group to be imported. The other members are
imported automatically.
new_dgname
Specifies the disk group to be imported.
USAGE
One reason to use the vximportdg utility is to import a second generation of the rootdg disk group so that its objects are available for
use while a system is running on a different rootdg. To prevent volumes on the second generation rootdg from having the same device minor
numbers as volumes (such as rootvol) on the active rootdg, the importation assigns temporary non-conflicting device minor numbers. If this
occurs, vximportdg outputs warning messages detailing the mapping of the minor numbers.
SEE ALSO vxdg(1M)VxVM 5.0.31.1 24 Mar 2008 vximportdg(1M)