what's the affect..?
as File system in /etc/vfstab has enteries which are not in df output so this reaason...
but why its like that?
---------- Post updated at 02:35 PM ---------- Previous update was at 02:17 PM ----------
there are two file system from storage which are not mounted i need to know does it affect telnet and what's the reason?
Last edited by Scott; 07-29-2013 at 09:43 AM..
Reason: Code tags
Hi
1) Please go through the following code :
char string2;
char string1;
main()
{
memcpy(string2,"SENDER ",12);
strcpy(string1,"******");
printf("%s\n%s\n",string1,string2);
}
2) and the output of... (7 Replies)
When try to execute the following script, its throwing this error:
" Use of uninitialized value in join or string at arraydef.pl line 17. "
The script is :
1 #!/usr/bin/perl
2
3 use strict;
4
5 my @a = ( 1...10 );
6
7 print " Original array : @a... (5 Replies)
Somewhat long story:
I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage.
This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
Helloo Frd's,
How to clear uninitialized state in solaris 10 Services, the fallowing inetadm shows on my server. I tried svcadm clear, enable... not worked. And also i can't change to enable some of service on that.
sara4@root# inetadm
ENABLED STATE FMRI
disabled ... (6 Replies)
Hallo all i am trying to execute this script ...............
But this is throwing the error......
use of uninitialized value in subtraction in at icd_convert.pl line 156
use of uninitialized value in subtraction in at icd_convert.pl line 157
use of uninitialized value in subtraction in at... (1 Reply)
Hi Guys,
I am trying to run a Perl code which reads the csv file and has to write certain fields to another file .
I see the following when trying to execute the script
Use of uninitialized value in string eq at ./file.pl line 19, <> line 13.
Use of uninitialized value in concatenation (.)... (4 Replies)
Hi,
I was writing one script which includes to switch to the another telnet automatically from the present telnet server. I was using rlogin but firstly it takes the same user name of the present telnet and secondly it is prompting for the password.
But i want to switch to the another telnet... (2 Replies)
Hi,
I want to know the difference between these two services. Both are under xinetd. Both are used for enabling and disabling Telnet service. So, can somebody please explain me the difference between the two ?
Thanks in advance :) (0 Replies)
I have written a PERL script to read files from directory that the filename contains OT. It then takes each line of each file and prints the first 5 characters before the first occurence of a /.
Currently I am getting the error:
Use of uninitialized value in string at rowGrab.pl line 43.... (3 Replies)
Hello,
This is Solaris-10 server, running with 4 non-global zones.
This server was hung today and I had to reboot it forcefully from console. Then root file-system was not clean and I had to run fsck from failsafe mode. After it came back in run-level-3, lot of services are showing in... (3 Replies)
Discussion started by: solaris_1977
3 Replies
LEARN ABOUT SUNOS
vfstab
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)