Move os from 1 disk to the other Post: 302810637

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move a disk to Sol. 2.6

I removed an external Sun disk (with data on it) from an old 2.6 system and added the disk to another 2.6 system. The new system seems to recognize the system (verified by the format command). When try to mount I am getting, I got the error: mount: /dev/dsk/c1t1d0s6 is not this fstype. I...

2. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk...

3. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks.

4. Solaris

( VxVM ) How to add the removed disk back to previous disk group

Previously , i remove the disk by #vxdg -g testdg -k rmdisk testdg02 But i got error when i -k adddisk bash-2.03# vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online invalid c0t1d0s2 auto:none ...

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home...

6. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any...

7. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

8. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help.

9. Solaris

Move root disk to new identical hardware

We have in a couple of occasions moved root disk & flashcard in netra 240 to new identical hardware instead of replacing mb in dead server. Flashcard is to preserve mac adresses and mainly hostid for license stuff. Works without doing anything other than poweron & boot. Now we have a similar...

LEARN ABOUT SUSE

partx

PARTX(8)						      System Manager's Manual							  PARTX(8)

NAME

       partx - telling the kernel about presence and numbering of on-disk partitions.

SYNOPSIS

       partx [-a|-d|-l] [--type TYPE] [--nr M-N] [partition] disk

DESCRIPTION

       Given  a  block	device	(  disk  ) and a partition table type , try to parse the partition table, and list the contents. Optionally add or
       remove partitions.

       This is not an fdisk - adding and removing partitions is not a change of the disk, but just telling the kernel about presence and numbering
       of on-disk partitions.

OPTIONS

       -a     add specified partitions or read disk and add all partitions

       -d     delete specified or all partitions

       -l     list partitions. Note that the all numbers are in 512-byte sectors.

       --type TYPE
	      Specify the partition type -- dos, bsd, solaris, unixware or gpt.

       --nr M-N
	      Specify the range of partitions (e.g --nr 2-4).

SEE ALSO

       addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)

AVAILABILITY

       The partx command is part of the util-linux-ng package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.

								    11 Jan 2007 							  PARTX(8)