I ran the foll. command:
The parted command (when I print the details) outputs something like below:
1 2048MB .......
what I want to bring in your notice that only 1 row came showing the complete size of the disk (detachable device) although I created 2 partitions with fdisk command.
The output of the below differs from above
It outputs 2 rows as I created 2 partitions. Why then parted command doesn't show it and shows the total size of the disk.
My other question :
When I put a fresh pendrive (without partitioning) it shows as one. (I mean it doesn't show that there are any partitions as I havent created any which is fine). Now when I create a partition say /dev/sdb1 (of /dev/sdb) then the output of fdisk shows sdb1. What about the remaining space. Now after creating a partition (sdb1), why then only sdb1 can be mounted and not the other part. Because earlier when there was no partition , it had mounted the complete disk.
Hello All, I am trying to list only directories in my current directory using the command "ls -d". But the output only contains the default directory "." and doesn't list the rest of the directories in the working directory. Can anyone explain why this is happening (2 Replies)
My question is very strange.
I can run ls command on remote host using ssh successfully. but when i try to run /sbin/md5 command on remote host. it doesnt run and get back to me on command prompt.
md5 command is exist on remote host.
This is what i tried which ran successfully.
Query -... (1 Reply)
Hi all,
I would like to replace some string in a text file by some string which would contains special characters like "/","\".
I.e. I have a text file with the statement contactperson somewhere in it.
Now I want to replace it by something else which includes special
characters like "/","\"
... (1 Reply)
I've installed Samba on my Solaris 10 (SPARC) server
# pkginfo |grep samba
system SUNWsmbac samba - A Windows SMB/CIFS fileserver for UNIX (client)
system SUNWsmbar samba - A Windows SMB/CIFS fileserver for UNIX (Root)
system ... (1 Reply)
Hi All,
I am not much strong in shell scripting...
I am using sed command in my script to find and replace a string.......
This is how script looks :
#############
#!/usr/bin/ksh
CONFIG_FILE=iom_test.txt
FIND=`echo "NIS_FTP_SERVER1=123.456.iom.com"`
REPLACE=`echo... (2 Replies)
I have three files a.txt , b.txt , c.txt in a directory called my_dir1 .These files were created before two or three months . I have a tar file called my_tar1.tar which contains three files a.txt , b.txt , d.txt . Somebody untarred the my_tar1.tar into my_dir1 directory. So existing two files were... (1 Reply)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
I am trying to use the below sed command to replace all "|" to ^, in a folder had 50 dat files. when i tried with 1 file it worked but when i tried with wild card, is not working.
sed -i 's/"|"/\^/g' *.dat
Is this the proper way to use sed command thank you very much for help. (3 Replies)
Discussion started by: cplusplus1
3 Replies
LEARN ABOUT SUSE
dar_cp
DAR_CP(1) General Commands Manual DAR_CP(1)NAME
dar_cp - disk archive copy
SYNOPSIS
dar_cp <source file> <destination file>
dar_cp -h
dar_cp -V
DESCRIPTION
dar_cp is similar to the standard 'cp' command, except it does not stop copying when an I/O error is met. Instead, it skips a bit further
and continues to copy the rest of the file, as much as possible.
dar_cp only accepts full filename (not directory) as argument. The reason of its existence in dar package is that you need it if you use
Parchive with dar and have a corruption on a CD-R or any other read-only medium. You need to copy the corrupted slice on a read-write
filesystem, for Parchive be able to repair it using slice associated redundancy files.
OPTIONS -h Displays help usage.
-V Displays version information.
EXIT CODES
dar_cp exists with the following codes:
0 upon normal execution (be some corrupted parted skipped or not)
1 syntax error on command-line
2 could not open source or destination files
3 any other system error met during the copy
5 when some data could not be copied due to I/O error
SIGNALS
Any signal sent to dar_cp will abort the program immediately, there is no way to have a proper termination before the end of the process
SEE ALSO dar(1), dar_xform(1), dar_manager(1), dar_slave(1)KNOWN BUGS
None actually.
AUTHOR
http://dar.linux.free.fr/
Denis Corbin
France
Europe
3rd Berkeley Distribution FEB 24th, 2007 DAR_CP(1)