05-17-2013
You need to extend the primary fdisk partition first.
10 More Discussions You Might Find Interesting
1. Solaris
I'm trying to mirror 2 eide disks on a solaris 10 x86 system.
Im trying to use the prtvtoc | fmthard command to mirror the vtoc.
How do they represent the entire disk like in solaris 9 (c0t0d0s2 = entire device)
0. c0d0 <DEFAULT cyl 26497 alt 2 hd 16 sec 63>
... (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies
2. HP-UX
on the disk array (EMC Clariion cx300):
we added 3 disk and extended the LUN corresponding to HP-9000 (rp7410)
on HP-UX 11.11:
diskinfo /dev/rdsk/c10t0d0, show more disk space, but
vgdisplay vg13 does not show more space
So the problem is the disk had increased, but vgdisplay does not... (6 Replies)
Discussion started by: pedro_lezaeta
6 Replies
3. Solaris
I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the... (2 Replies)
Discussion started by: chuck43
2 Replies
4. Solaris
Plz help me in installing solaris 10 11/06 on XP sp2 system having only one hard disk (1 Reply)
Discussion started by: skargarika
1 Replies
5. Solaris
I have 2 hard disks ,one hard disk(40gb) completely for windows Os,and the other(120gb) for solaris Os.
In the second hard disk.I have utilised around 10gb for the solaris installation and also partitioned with the available 10gb space for the solaris x86 OS.
Now i need to utilise the... (8 Replies)
Discussion started by: jayaprakash
8 Replies
6. Solaris
Hello Gurus,
Im trying to migrate some SAN disks from sparc server to X86 one, and having issues with disks not getting mounted on the X86 server with " not this fstyp error" due to the different partitions lay out between the two OS. I have tried it from sparc to sparc server and it worked,... (10 Replies)
Discussion started by: aladdin
10 Replies
7. Solaris
I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Discussion started by: TKD
6 Replies
8. Solaris
Hi, I am trying to install Solaris 11 on an X86 machine.
I am using the text install iso image burned to an optical disk.
The system contains a single 500G SATA drive.
When the system attempts to detect local disks, it reports that the disk only has a capacity of 8GB.
How do I get... (2 Replies)
Discussion started by: jpoc
2 Replies
9. Red Hat
Hi All,
I am working with a virtual machine of redhat and hard-disk is 100g in all, and the system free size is about 60g.
while the problem is when i run command: df -h, the root path seems already full. So i am wondering, is there any command i can work with to extend space for mounted... (2 Replies)
Discussion started by: ivyyoung
2 Replies
10. Solaris
We have Proliant DL380 G2 running Solaris 9 x86
There are 6 physical disks installed which I believe are mirrored at hardware level to 3 sets to present 3 disks to the OS.
Is there any way to check the mirror status at OS level ?
I am guessing not and it may need a trip to site as we have no... (4 Replies)
Discussion started by: frustrated1
4 Replies
LEARN ABOUT DEBIAN
acorn-fdisk
FDISK(8) BSD System Manager's Manual FDISK(8)
NAME
acorn-fdisk -- partition editor for Acorn/RISC OS machines
SYNOPSIS
acorn-fdisk -h | --help | -v | --version
acorn-fdisk [-t scheme | --type scheme] -l | --list [device ...]
acorn-fdisk [-t scheme | --type scheme] -s | --size partition
acorn-fdisk [-t scheme | --type scheme] [device]
DESCRIPTION
The acorn-fdisk utility allows one to display or interactively edit partition tables for Acorn/RISC OS machines in various formats. Using
the PC/BIOS format, standard IBM PC (i386) partition tables can also be accessed. When no optional device is given, it defaults to /dev/hda
or /dev/sda.
The options are as follows:
-h | --help Display a short usage and exit immediately.
-l | --list Display the partition table(s) of all devices.
-s | --size Display the size of partition.
-t | --type Select the partitioning scheme to use. Valid schemes are:
EESOX Eesox SCSI on the Acorn machines.
ICSIDEFS ICS IDE.
Filecore/Linux Linux on Filecore. This uses the non-ADFS descriptor to point to the start of the disc to be partitioned. The
first two sectors contain a partition table to identify the Linux partitions contained within.
PC/BIOS PC/BIOS partitioning scheme. This consists of a partition table in the first sector of the disk which contains
both CHS and LBA values for the partitions. There can be up to four entries in the primary partition table.
One of these can be an extended partition containing up to four extra partitions.
PowerTec PowerTec SCSI on the Acorn machines.
Filecore/RISCiX RiscIX on Filecore.
-v | --version
Display the version of acorn-fdisk and exit immediately.
If neither -l | --list or -s | --size are given, the partition table of the given device will be edited interactively.
EXAMPLES
Display the default device's partition table on a PC:
acorn-fdisk --type PC/BIOS -l
Display the PC partition table of /dev/sda:
acorn-fdisk --type PC/BIOS --list /dev/sda
Display the size in blocks of the partition /dev/sda1:
acorn-fdisk --type PC/BIOS --size /dev/sda1
Edit the MBR partition table interactively:
acorn-fdisk --type PC/BIOS
Display the partition table of an MBR backed up to a file:
acorn-fdisk -t PC/BIOS -l mbrdump.bin
Display the size of the first partition on a device where the MBR would be restored from the backup file mbrdump.bin:
acorn-fdisk -t PC/BIOS -s mbrdump.bin1
AUTHORS
arm-fdisk was written by Russell King <rmk@arm.uk.linux.org> based on util-linux fdisk, which was written at least partially by
A. V. Le Blanc <LeBlanc@mcc.ac.uk>.
This manual page was written for the Debian system by
Thorsten Glaser <tg@debian.org> but may be used by others.
BSD
October 2, 2010 BSD