Sponsored Content
Full Discussion: iptables in a NAT scenario
Special Forums Cybersecurity iptables in a NAT scenario Post 302808861 by DGPickett on Friday 17th of May 2013 04:12:49 PM
Old 05-17-2013
IPTables can do NAT, but here someone else does it for you, so all addresses are inside addresses or real remote Internet addresses.

NAT/PAT generaly hides inside addresses, not Internet remote addresses.

I suppose you could write or configure a NAT/PAT to forward packets to you with the remote address changed to ones of the NAT host, and when packets return to the NAT host, it knows which host-port become what remote host-port. That ensures the NAT/PAT packets route back to the NAT/PAT host, but seems a waste of time. Usually the NAT/PAT packets have the remote Internet client or server host and port, it is the inside addresses that are protected, and it just does not work if your routing sends response packets to a different firewall. Usually inside addresses are either registered Internet ready, unroutable like 10.*.*.* or stolen/made-up. I suppose if you have stolen, you need to ensure the real ones are serviced and not a threat!
This User Gave Thanks to DGPickett For This Post:
 

10 More Discussions You Might Find Interesting

1. IP Networking

Ftp'ing thru a Iptables NAT Masquerade

Greetings to all. My new firewall is giving me one hell of a problem. I'm running iptables and masquerading my intranet thru NAT. But here is the problem. Whenever I try to FTP to a server outside of my lan I get a 500 illegal port error. I've come to the conclusion that NAT is... (2 Replies)
Discussion started by: phrater
2 Replies

2. UNIX for Advanced & Expert Users

iptables internal NAT with two public IP

Hello Guys, I have a debian machine that work as a firewall (iptables + squid 2.6) with two physical interfaces: eth0 (public interface) and eth1 (internal interface LAN). I have created an alias eth1:1 in order to have two subnets on same physical interface: cat/etc/network/interfaces auto... (0 Replies)
Discussion started by: sincity2006
0 Replies

3. IP Networking

How to configure Full Cone NAT using iptables ?

Hi Experts; I want to find the right iptables commands combination to address the following need: - NEs are NATed thru the linux box (using iptables) towards the WAN cloud, where the NTP servers are situated. - In order to achieve redundancy, the NTP Servers are in a load balancing cluster... (0 Replies)
Discussion started by: lvl1s7a
0 Replies

4. Debian

Iptables Nat forward port 29070

Hello, the Nat and the forward worked on my debian server up to the reboot of machines. The following rules*: /sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29070 -j DNAT --to-destination 10.0.1.7:29070 /sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d... (0 Replies)
Discussion started by: titoms
0 Replies

5. IP Networking

iptables NAT prerouting & postrouting

Good morning, I'm a newbie of iptables and as far as I've seen on tutorials on the Internet it seems that both prerouting and postrouting NAT chains are undergone both by a packet that goes from an internal LAN to the Internet and of a one that goes in the opposite direction (from the Internet to... (0 Replies)
Discussion started by: giac85
0 Replies

6. Red Hat

NAT Loopback and iptables

Hello, please can you help and explain me. I have two servers. Both are RHEL6. I use the first one like router and the second one for apache. Router forwards 80 port on the second server and I can open that from the internet (mysite.com, for example). But I can not open mysite.com if i try to... (0 Replies)
Discussion started by: 6765656755
0 Replies

7. IP Networking

Nat and packet limits with iptables

Hi all, I have a following situation: - I want certain source IPs to be natted to a different destination IP and Port. Following is how I am achieving it: /usr/local/sbin/iptables -t nat -A PREROUTING -p tcp -s 192.168.10.12 --dport 1500 -j DNAT --to-destination 192.168.10.20:2000 ... (3 Replies)
Discussion started by: ahmerin
3 Replies

8. IP Networking

Debugging NAT / prerouting issues (iptables)

Hello, Recently I discovered an issue with packet routing in the latest Android releases (4.4+ KitKat & Lollipop). It seems that the problem Android specific, but essentially it comes from the Linux kernel. I already filed a bug report to Google. You can see the details by searching for... (0 Replies)
Discussion started by: Vladislav
0 Replies

9. IP Networking

NAT via iptables - Won't work!!

Hi guys I'm running on debian on a small embedded system. I have a ppp interface that is connected to the internet (and works). My unit also has wifi access point (which works and I can connect to it). I want to allow connections to the wifi to be able to use the internet from ppp0... (1 Reply)
Discussion started by: alirezan1
1 Replies

10. Cybersecurity

Openvpn nat and iptables

good day good people hi first to tell that firewall and vpn is working as expected, but I notice something strange. I have host system 11.11.11.11(local ip) firewall is blocking everything except port to vpn. I have vpn on virtualized system 22.22.22.22 (CentOS both host and virtual). ... (0 Replies)
Discussion started by: end
0 Replies
NAT action in tc(8)						       Linux						       NAT action in tc(8)

NAME
nat - stateless native address translation action SYNOPSIS
tc ... action nat DIRECTION OLD NEW DIRECTION := { ingress | egress } OLD := IPV4_ADDR_SPEC NEW := IPV4_ADDR_SPEC IPV4_ADDR_SPEC := { default | any | all | in_addr[/{prefix|netmask}] DESCRIPTION
The nat action allows to perform NAT without the overhead of conntrack, which is desirable if the number of flows or addresses to perform NAT on is large. This action is best used in combination with the u32 filter to allow for efficient lookups of a large number of stateless NAT rules in constant time. OPTIONS
ingress Translate destination addresses, i.e. perform DNAT. egress Translate source addresses, i.e. perform SNAT. OLD Specifies addresses which should be translated. NEW Specifies addresses which OLD should be translated into. NOTES
The accepted address format in OLD and NEW is quite flexible. It may either consist of one of the keywords default, any or all, represent- ing the all-zero IP address or a combination of IP address and netmask or prefix length separated by a slash (/) sign. In any case, the mask (or prefix length) value of OLD is used for NEW as well so that a one-to-one mapping of addresses is assured. Address translation is done using a combination of binary operations. First, the original (source or destination) address is matched against the value of OLD. If the original address fits, the new address is created by taking the leading bits from NEW (defined by the netmask of OLD) and taking the remaining bits from the original address. There is rudimental support for upper layer protocols, namely TCP, UDP and ICMP. While for the first two only checksum recalculation is performed, the action also takes care of embedded IP headers in ICMP packets by translating the respective address therein, too. SEE ALSO
tc(8) iproute2 12 Jan 2015 NAT action in tc(8)
All times are GMT -4. The time now is 12:42 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy