Hi
I have small home network and I want to block some forums on web
When I use this
iptables -A INPUT -s forum -j DROP
rules is applied but when I restart some of PC rules are not present any more also I tried to save firewall settings
iptables-save > /root/dsl.fw
but how to... (2 Replies)
Please i need help in how to add/remove rules in timezone files under /usr/share/zoneinfo/ , cause i have tried many times to do this by adding rules in an time zone file then compile this file with zic tool and then link it to /etc/localtime but always the output doesn't match what i have made... (0 Replies)
Hello,
I was playing around with iptables to setup an isolated system. On a SLES10 system, I ran the below to setup my first draft of rules. I noticed that the rules come into effect immediately and do not require any restart of iptables.
iptables -A INPUT -j ACCEPT
iptables -A OUTPUT -m... (4 Replies)
Hello,
I'm having problem with an iptables rule. It seems that on one of two systems on the nat table, the INPUT chain doesn't exist for some strange reason.
I get the error below:
# iptables -t nat -A INPUT -j ACCEPT
iptables: No chain/target/match by that name.
Here is my kernel on... (0 Replies)
Hi,
I am new to linux stuff. I want to use linux iptables to configure rule so that all my incoming traffic with protocol "tcp" is forwarded to the "FORWARD CHAIN". The traffic i am dealing with has destination addresss of my machine but i want to block it from coming to input chain and somehow... (0 Replies)
Could someone help me with writing rules for iptables?
I need a dos attacks protection for a game server.
port type udp
ports 27015:27030
interface: eth0
Accept all packets from all IPs
Chek if IP sent more than 50 packets per second
Drop all packets from this IP for 5 minutes
I would be... (0 Replies)
Hi Champs
i am new in Iptables and trying to write rules for my Samba server.I took some help from internet, created one script and run from rc.local :
#Allow loopback
iptables -I INPUT -i lo -j ACCEPT
# Accept packets from Trusted network
iptables -A INPUT -s my-network/subnet -j... (0 Replies)
I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99
Source Destination was UP, with IP 192.168.1.15.
This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's because I need to apply the same rules in... (2 Replies)
Hi,
I've been struggling with this all morning and seem to have a blind spot on what the problem is. I'm trying to use iptables to block traffic on a little cluster of raspberry pi's but to allow ssh and ping traffic within it.
The cluster has a firewall server with a wifi card connecting to... (4 Replies)
Hello,
I did 2 scripts. The second one is, I hope, more secure.
What do you think?
Basic connection (no server, no router, no DHCP and the Ipv6 is disabled)
#######script one
####################
iptables -F
iptables -X -t filter
iptables -P INPUT DROP
iptables -P FORWARD... (6 Replies)
Discussion started by: Thomas342
6 Replies
LEARN ABOUT CENTOS
iptables-xml
IPTABLES-XML(1) iptables 1.4.21 IPTABLES-XML(1)NAME
iptables-xml -- Convert iptables-save format to XML
SYNOPSIS
iptables-xml [-c] [-v]
DESCRIPTION
iptables-xml is used to convert the output of iptables-save into an easily manipulatable XML format to STDOUT. Use I/O-redirection pro-
vided by your shell to write to a file.
-c, --combine
combine consecutive rules with the same matches but different targets. iptables does not currently support more than one target per
match, so this simulates that by collecting the targets from consecutive iptables rules into one action tag, but only when the rule
matches are identical. Terminating actions like RETURN, DROP, ACCEPT and QUEUE are not combined with subsequent targets.
-v, --verbose
Output xml comments containing the iptables line from which the XML is derived
iptables-xml does a mechanistic conversion to a very expressive xml format; the only semantic considerations are for -g and -j targets in
order to discriminate between <call> <goto> and <nane-of-target> as it helps xml processing scripts if they can tell the difference between
a target like SNAT and another chain.
Some sample output is:
<iptables-rules>
<table name="mangle">
<chain name="PREROUTING" policy="ACCEPT" packet-count="63436" byte-count="7137573">
<rule>
<conditions>
<match>
<p>tcp</p>
</match>
<tcp>
<sport>8443</sport>
</tcp>
</conditions>
<actions>
<call>
<check_ip/>
</call>
<ACCEPT/>
</actions>
</rule>
</chain>
</table> </iptables-rules>
Conversion from XML to iptables-save format may be done using the iptables.xslt script and xsltproc, or a custom program using libxsltproc
or similar; in this fashion:
xsltproc iptables.xslt my-iptables.xml | iptables-restore
BUGS
None known as of iptables-1.3.7 release
AUTHOR
Sam Liddicott <azez@ufomechanic.net>
SEE ALSO iptables-save(8), iptables-restore(8), iptables(8)iptables 1.4.21 IPTABLES-XML(1)