Hpux and bacula script Post: 302804415

4 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Need Script to Use CPUs on a HPUX server to simulate Workload Manager on HPUX.

I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas?

2. Linux

Script migration help from HPUX

Hi, We are looking for the extensive list of Commands/Syntax that were working in HP-UX and will not work on LINUX. We would find such commands and modify them accordingly. Do we have any reference sites or documents. You help would be greatly appreciated. Thanks in advance

3. HP-UX

pwage-hpux-T for Trusted HPUX servers

I'm sharing this in case anybody needs it. Modified from the original solaris pwage script. This modified hpux script will check /etc/password file on hpux trusted systems search /tcb and grep the required u_succhg field. Calculate days to expiry and notify users via email. original solaris...

4. HP-UX

Hpux pkill,a little help with script

This work #!/usr/bin/sh COMM=${1} shift UNIX95=1 ps -C ${COMM} -o pid='' | while read P do kill -15 ${P} done This don't work #!/usr/bin/sh COMM=${1} shift UNIX95=1 ps -C ${COMM} -o pid='' | while read P do kill -"$@" ${P} done

LEARN ABOUT LINUX

irsend

IRSEND(1)							   User Commands							 IRSEND(1)

NAME

       irsend - basic LIRC program to send infra-red commands

SYNOPSIS

       irsend [options] DIRECTIVE REMOTE CODE [CODE...]

DESCRIPTION

       Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
       as TV boxes, HiFi sets, etc.

       DIRECTIVE can be:
	  SEND_ONCE	    - send CODE [CODE ...] once
	  SEND_START	    - start repeating CODE
	  SEND_STOP	    - stop repeating CODE
	  LIST		    - list configured remote items
	  SET_TRANSMITTERS  - set transmitters NUM [NUM ...]
	  SIMULATE	    - simulate IR event

       REMOTE is the name of a remote, as described in the lircd configuration file.

       CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.

       NUM is the transmitter number of the hardware device.

       For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:

	  LIST	 ""    ""   - list all configured remote names
	  LIST REMOTE  ""   - list all codes of REMOTE
	  LIST REMOTE CODE  - list only CODE of REMOTE

       The SIMULATE command only works if it has been explicitly enabled in lircd.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device
	      use given lircd socket [/var/run/lirc/lircd]

       -a --address=host[:port]
	      connect to lircd at this address

       -# --count=n
	      send command n times

EXAMPLES

	  irsend LIST DenonTuner ""
	  irsend SEND_ONCE  DenonTuner PROG-SCAN
	  irsend SEND_ONCE  OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
	  irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
	  irsend SEND_STOP  OnkyoAmpli VOL-DOWN
	  irsend SET_TRANSMITTERS 1
	  irsend SET_TRANSMITTERS 1 3 4
	  irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"

FILES

       /etc/lirc/lircd.conf
	      Default lircd configuration file.  It should contain all the remotes, their infra-red codes and the corresponding timing	and  wave-
	      form details.

DIAGNOSTICS

       If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
       "irsend: could not connect to socket"
       "irsend: Connection refused" (or "Permission denied").

SEE ALSO

       The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.

       lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.

irsend 0.9.0-pre1						   October 2010 							 IRSEND(1)