I have two net-card. one is 172.16.24.99(ENG) ,another is 172.16.25.99(ENG-B). Both masks is 255.255.255.0.
I will monitor data on the tcp port 8055 in ENG, How do I set option of tcpdump command (2 Replies)
Hi, I got the following question regarding tcpdump and I would appreciate your help/feedback:
--Scenario
I am instructed to capture the network traffic by getting the tcpdump data/files of our network for every hour.
--Problem
Some of the connections are still open when the capture is done... (1 Reply)
i would like to know about tcpdump
i would like to use tcpdump to get information about these
- Date
- time
- source hostname
- source mac address
- source ip address
- destination ip address
- see outbound only
then i use command like this
tcpdump -i le0 -n -q -tttt -e src net... (0 Replies)
i would like to know about tcpdump
i would like to use tcpdump to get information about these
- Date
- time
- source hostname
- source mac address
- source ip address
- destination ip address
- see outbound only
then i use command like this
tcpdump -i le0 -n -q -tttt -e src net... (2 Replies)
Hi,
I want to capture TCPDUMP of traffic, I tried doing this but did not find success..can anyone plz correct it.
# tcpdump -s0 -vv -w /home/osuresh/test_tcp_dump host 10.12.10.22 && port 161
bash: tcpdump: command not found
# tcpdump -s0 -vv -w /home/osuresh/test_tcp_dump host... (5 Replies)
Hi Everyone,
anyone face "tcpdump -i any" does not work? i mean if i use -i eth0, can capture eth0, or use -i eth1 also can. but then tcpdump -i any, seems cannot capture packets. :confused:
please advice, thanks (2 Replies)
I'm new to the Unix/Linux world. I have taken classes and played with a few simple scripts but never had a real world application. Here is my problem.
What I need to do is every 15min between 8am and 5pm, run
tcpdump -s 2000 -w flowroute-0000.pcap
where the "0000" is the current time.
... (4 Replies)
I've recently started learning to use TCPdump, and I find it pretty interesting. There's one thing I don't understand. When I tell it to capture packets on, say, the WiFi interface en1, it often captures packets sent or received by other hosts on the network. How can it do this? My... (3 Replies)
Discussion started by: Ultrix
3 Replies
LEARN ABOUT DEBIAN
ovs-tcpundump
ovs-tcpundump(1) Open vSwitch Manual ovs-tcpundump(1)NAME
ovs-tcpundump - convert ``tcpdump -xx'' output to hex strings
SYNOPSIS
ovs-tcpundump < file
Common options:
[-h | --help] [-V | --version]
DESCRIPTION
The ovs-tcpundump program reads tcpdump -xx output on stdin, looking for hexadecimal packet data, and dumps each Ethernet as a single hexa-
decimal string on stdout. This format is suitable for use with the ofproto/trace command supported by ovs-vswitchd(8) via ovs-appctl(8).
At least two -x or -X options must be given, otherwise the output will omit the Ethernet header, which prevents the output from being using
with ofproto/trace.
OPTIONS -h, --help
Prints a brief help message to the console.
-V, --version
Prints version information to the console.
SEE ALSO ovs-appctl(8), ovs-vswitchd(8), ovs-pcap(1), tcpdump(8), wireshark(8).
Open vSwitch December 2010 ovs-tcpundump(1)
05-06-2013
