Hiya all,
How do I get the IP address of my local unix box???
IPconfig - don't exist
nslookup - only for other boxes....
I have my Fedora Server now on the office network. Can ping others, can get onto internet via web proxy....
Also:
How do I create a Drive Share, so our windows... (9 Replies)
I needed to get a machine's local IP address when not root (so no ifconfig).
Eventually, I arrived at this convoluted solution that grabs the unique local IP info from netstat...
netstat -n -t | awk '{print $4}' | grep -o "*\.*\.*\.*" |\
grep -v "127.0.0.1" | sort -u
...however I... (5 Replies)
We have requirement to get the local system IP address of whoever logined the DataBase(sqlplus) or any process in application server.
Actually I connected to application server thru putty and then conencted to Database using sqlplus command.
we have tried below commands :
who -u|grep... (4 Replies)
How do I configure site-local IPv6 address in HP-UX box?
I can get link local IPv6 address automatically when I put IPv6 up.
aps39-88-root# ifconfig lan0 inet6 up (0 Replies)
Hi,
Am using FreeBSD7.4/i386
During IPv6 configuration, I added the following in rc.conf as
Restarted IPv6 network using /etc/rc.d/network_ipv6 restart..
My problem is I need to set link local IPv6 address auto-configured..
Is my proceeding right??
I feel something missing to make... (0 Replies)
Im using a X-Terminal in my windows pc to connect to a Linux server.
Is there a way to know my local IP address in my x-terminal console?
Here are few commands which didnt help me:
ss_cc@MGTS5026-13sh1:~> finger
Login Name Tty Idle Login Time Where
loadhlr ... (6 Replies)
when i execute from local machine
ping domainname i get the external ip address but i am on local dns and i expect the local ip address..
using nslookup : no problem
so i cannot find why...
thanks (2 Replies)
Hi All,
Can you please help me in understanding the relationship between local and foreign address in the output of netstat -an.
Output 1
----------
162.103.162.37.50224 162.103.162.35.9511 49640 0 49640 0 ESTABLISHED
162.103.162.37.50263 162.103.162.35.9512 49640 0... (1 Reply)
Hi all,
I am working with SIP protocol and am using SIPp to generate SIP traffic.
But the call is not going through since I get the error;
2015-02-24 14:09:39:330 1424804979.330517: Can't get local IP address in getaddrinfo, local_host='NODE-01', local_ip=''.
My ifconfig output is;
... (2 Replies)
Discussion started by: Junaid Subhani
2 Replies
LEARN ABOUT DEBIAN
ifscheme
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)