04-22-2013
Ok after some more reading, I tried this:
Quote:
mdadm --create /dev/md8 --verbose --level=5 --raid-devices=4 /dev/sda /dev/sdb /dev/sdc missing
and got this:
Quote:
mdadm: layout defaults to left-symmetric
mdadm: chunk size defaults to 512K
mdadm: layout defaults to left-symmetric
mdadm: layout defaults to left-symmetric
mdadm: super1.x cannot open /dev/sda: Device or resource busy
mdadm: failed container membership check
mdadm: device /dev/sda not suitable for any style of array
aaaghhh!!!
---------- Post updated at 10:17 PM ---------- Previous update was at 10:13 PM ----------
also...
Quote:
$ sudo cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md8 : inactive sda[0] sdc[2] sdb[1]
8790796680 blocks super 1.2
---------- Post updated at 10:29 PM ---------- Previous update was at 10:17 PM ----------
also:
Quote:
$ sudo mdadm --detail /dev/md8
/dev/md8:
Version : 1.2
Creation Time : Mon Jan 7 11:03:39 2013
Raid Level : raid5
Used Dev Size : -1
Raid Devices : 4
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Sat Apr 6 13:17:10 2013
State : active, degraded, Not Started
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Name : TTVServer:TTV2 (local to host TTVServer)
UUID : dc344271:82f55bd0:fcfd0e16:a2a60bc8
Events : 103
Number Major Minor RaidDevice State
0 8 0 0 active sync /dev/sda
1 8 16 1 active sync /dev/sdb
2 8 32 2 active sync /dev/sdc
3 0 0 3 removed
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I was trying to get a server using a raid controller card up and running. I could not get the card configured right so i just installed the system strait onto a scsi drive.
Questions?
Is is nescessary to have the operating system on raid? Pros/Cons
Is it really difficult to go back later... (1 Reply)
Discussion started by: macdonto
1 Replies
2. UNIX for Dummies Questions & Answers
Hi guys,
I was asked to setup an Ultra60 (Sol 8) with an StorEdge A1000. Does anyone know if a probe-scsi-all is suppose to detect it? Right now it doesn't, so maybe I answered my own question :rolleyes:
We have an the same setup running already, but I wasn't around when that was setup.
... (3 Replies)
Discussion started by: Yinzer955i
3 Replies
3. SCO
recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
Discussion started by: prakrithi
3 Replies
4. Solaris
hi
this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network)
i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
Discussion started by: Landser
4 Replies
5. UNIX for Advanced & Expert Users
Hi,
Could somebody sent me sample output of below commands on
1) Debian linux and 2) RHEL3 and 3) any RHEL version less than 3,
a) uname -a
b) cat /etc/issue
c) cat /etc/redhat-release or other equivalent file
Thanks in advance
- Krishna (0 Replies)
Discussion started by: krishnamurthig
0 Replies
6. Solaris
I have inhereted a Solaris 8 server which is running an important application in our production environment.
The dilema is that the server has just one internal hard drive I believe it was installed using jump start, it does not even have a CD ROM drive and root is not mirrored (since there is... (2 Replies)
Discussion started by: Tirmazi
2 Replies
7. SCO
After System power get failed
File system is not getting mounted in read- write mode (1 Reply)
Discussion started by: gtkpmbpl
1 Replies
8. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
9. Debian
I am installing a Debian Server on a:
HP Proliant DL380 G4
Dual CPU's 3.20 ghz / 800 mhz / 1MB L2
5120 MB RAM
6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each)
I will be using this server to capture VHS video, encode, compress, cut, edit, make DVD's, rip... (0 Replies)
Discussion started by: Marcus Aurelius
0 Replies
10. Shell Programming and Scripting
Hi Gurus,
Good morning... :)
OS Info:
Linux 2.6.32-431.17.1.el6.x86_64 #1 SMP Fri Apr 11 17:27:00 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux
I have a script which takes multiples parameters from a properties file one by one and run in background (to do parallel processing). As example:
$ cat... (4 Replies)
Discussion started by: saps19
4 Replies
MPT(4) BSD Kernel Interfaces Manual MPT(4)
NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device mpt
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
mpt_load="YES"
DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers.
HARDWARE
The following controllers are supported by the mpt driver:
o LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
o LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
o LSI Logic FC909 (1Gb/s Fibre Channel)
o LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
o LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
o LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
o LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
o LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)
The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including:
o Dell PowerEdge 1750 thru 2850
o IBM eServer xSeries 335
These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports.
The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both
SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at
best.
The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the
FC949ES card.
This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the
LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.
SEE ALSO
cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8)
LSI Logic Website, http://www.lsilogic.com/.
HISTORY
The mpt driver first appeared in FreeBSD 4.6.
AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.
Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements.
BUGS
BSD
May 13, 2010 BSD