04-18-2013
Maybe I'm missing something here, but I don't recall seeing "why" you are wanting to change the default SSL port. Do you have an app that is trying to use this port for some other reason?
My suggestion is to change w/e other software is wanting this port so as not to conflict with a standard port setting.
Regards,
Kelam
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have an application service running on an AIX server
Client application is able to connect to the server machine.
Strange thing is
when i do "netstat -a | grep servicename" I get no output
but
when i do "ps -ef | grep service name", I am able to see the service running
I... (1 Reply)
Discussion started by: bryan
1 Replies
2. AIX
How can i check which service is activated on my AIX Box?
how one can check particular port is open or not (like ftp/telnet port)?
I dont have admin rights (1 Reply)
Discussion started by: ashish4422
1 Replies
3. Solaris
Need help from the unix admins out there. I am trying to telnet from a windoze machine to a sun machine. It won't let me connect. I looked at etc/services and I found the port that telnet was listening on. But, how can I tell if its actually up and available? is there a unix command I can issue?... (15 Replies)
Discussion started by: Harleyrci
15 Replies
4. UNIX for Advanced & Expert Users
I'm becoming a dying breed where I work. More and more sys admins are advocating automatically restarting failed services such as tomcat, jboss, etc. I've always been against doing this except with buggy apps that can't be fixed or avoided.
My main argument is that I feel it's a trick used by... (9 Replies)
Discussion started by: mglenney
9 Replies
5. AIX
hello,
i have an AIX6.1.7.2 machine that it was upgraded recently from AIX5.3.9.4.
when i kill system services that should restart automatically like /usr/sbin/cron it doesnt start.
i checked my /etc/inittab file and i confirmed that this service is in respawn status so when i kill this process... (2 Replies)
Discussion started by: omonoiatis9
2 Replies
6. Ubuntu
I am trying to find out what port number is used for SSH communication and HTTPS services in my Ubuntu OS.
Thank you,
Crim (1 Reply)
Discussion started by: crimputt
1 Replies
7. Shell Programming and Scripting
Hi Guys,
I need bash script to restart the service.
1. Disable the service called SASM
svcadm disable sasm
2. if service went to maintenance mode then it shuld clear it with below command
svcadm clear sasm
3.or else it should restart the mysql service
/etc/init.d/mysql stop... (1 Reply)
Discussion started by: bapu1981
1 Replies
8. Shell Programming and Scripting
Hi,
I just started working on a script. After my research, i found a command which can help me:
AIM: To build a script which starts the services (Services 1) on server 1 automatically whenever its down. And it has a dependency on other service (Service 2) on Server 2.
So my script has to... (4 Replies)
Discussion started by: draghun9
4 Replies
9. SuSE
Hi,
We have a ldap server configured with services (port) and want to know how to fetch that to the ldap clients:
# cat /etc/nsswitch.conf|grep -i services
services: files sss (neither sss nor ldap works)
by doing "#getent services" I am getting only the result from /etc/services but I... (1 Reply)
Discussion started by: Sridaran
1 Replies
10. Debian
Hello,
I would like to do follow steps.
Set a static IP-Adress on eth0 (For Testing)
Set DHCP on eth0
All steps should be done without a single reboot.
/etc/network/interfaces
iface eth0 inet static
address 192.0.2.7/24
gateway 192.0.2.254How do i perform... (3 Replies)
Discussion started by: int3g3r
3 Replies
LEARN ABOUT CENTOS
ieee1284_open
IEEE1284_OPEN(3) Functions IEEE1284_OPEN(3)
NAME
ieee1284_open - open a port
SYNOPSIS
#include <ieee1284.h>
int ieee1284_open(struct parport *port, int flags, int *capabilities);
DESCRIPTION
In order to begin using a port it must be opened. Any initial set-up of the port is done at this stage. When an open port is no longer
needed it should be closed with ieee1284_close(3).
The possible flags are:
F1284_EXCL
This device cannot share the port with any other device. If this is the case it must be declared at this stage, so that other drivers
trying to access the port know not to bother; otherwise they will wait until this driver releases the port, i.e. never.
The iopl/dev-port access methods don't support this yet, but the ppdev ones do.
If capabilities is not NULL it must point to storage for an int, which will be treated as a set of flags, one per bit, which the library
sets or clears as appropriate. If a capability is present it will be used when asked for. They are:
CAP1284_RAW
Pin-level access is available. If this capability is present then the following functions are effective: ieee1284_write_data,
ieee1284_read_status, ieee1284_wait_status, ieee1284_write_control, ieee1284_read_control, ieee1284_frob_control.
CAP1284_NIBBLE
There is an implementation of nibble mode for this port.
CAP1284_BYTE
There is an implementation of byte mode for this port.
CAP1284_COMPAT
There is an implementation of compatibility mode for this port.
CAP1284_ECP
There is a hardware implementation of ECP mode for this port.
CAP1284_ECPRLE
There is an RLE-aware implementation of ECP mode for this port (the F1284_RLE flag is recognised by the ECP transfer functions).
CAP1284_ECPSWE
There is a software implementation of ECP mode for this port.
CAP1284_BECP
There is an implementation of bounded ECP mode for this port.
CAP1284_EPP
There is a hardware implementation of EPP mode for this port.
CAP1284_EPPSWE
There is a software implementation of EPP mode for this port.
CAP1284_IRQ
An interrupt line is configured for this port and interrupt notifications can be received using ieee1284_get_irq_fd(3).
CAP1284_DMA
A DMA channel is configured for this port.
RETURN VALUE
E1284_OK
The port is now opened.
E1284_INIT
There was a problem during port initialization. This could be because another driver has opened the port exclusively, or some other
reason.
E1284_NOMEM
There is not enough memory.
E1284_NOTAVAIL
One or more of the supplied flags is not supported by this type of port.
E1284_INVALIDPORT
The port parameter is invalid (for instance, the port may already be open).
E1284_SYS
There was a problem at the operating system level. The global variable errno has been set appropriately.
SEE ALSO
ieee1284_close(3)
AUTHOR
Tim Waugh <twaugh@redhat.com>
Author.
COPYRIGHT
Copyright (C) 2001-2003 Tim Waugh
[FIXME: source] 06/17/2014 IEEE1284_OPEN(3)