Not sure that this is the most efficient / intelligent solution, but you can use it as a hint to be improved:
A bit more care when preparing the sample hadn't hurt, had it?
I'm working on formatting some attendance data to meet a vendors requirements to upload to their system. With some help on the forums here, I have the data close. But they've since changed what they want.
The vendor wants me to submit three fields to them. Field 1 is the studentid field,... (4 Replies)
Hello,
I have a file with two fields. The first field repeats itself for quite a while but the second field changes. What I want to do is to go through the first column until its value changes (and while it doesn't, verify that the second field is in a sequence from 0-15).
Example input:
... (13 Replies)
My input is as below:
1|2|3|a02 test|303
2|2|4|1002 a05 ind|303
4|3|5|ind|30
Output
1|2|3|a02test|303
2|2|4|a05ind|303
4|3|5|ind|30
I used command:
I am getting above output. Is there any simple way using awk to acheive this.
Thanks.
Please use code tags! (6 Replies)
Hi,
I have two files formatted as following:
File 1: (user_num_ID , realID) (the NR here is 41671)
1 cust_034_60
2 cust_80_91
3 cust_406_4
..
..
File 2: (realID , clusterNumber) (total NR here is 1000)
cust_034_60 2
cust_406_4 3
..
.. (11 Replies)
Hi All,
I want to remove the rows from File1.csv by comparing the columns/fields in the File2.csv. I only need the records whose first column is same and the second column is different for the same record in both files.Here is an example on what I need.
File1.csv:
RAJAK|ACTIVE|1... (2 Replies)
Hi
I have 2 files as below
File 1
Chr Start End
chr1 120 130
chr1 140 150
chr2 130 140
File2
Chr Start End Value
chr1 121 128 ABC
chr1 144 149 XYZ
chr2 120 129 PQR
I would like to compare these files using awk; specifically if column 1 of file1 is equal to column 1 of file2... (7 Replies)
Hello Friends,
I just need a small help, I need an awk program which can join 2 fields of different files which are having one common field into one file.
File - 1
FileName~Size
File- 2
FileName~Date
I need the output file in the following way
O/P- File
FileName~Date~Size
For... (4 Replies)
Hi experts,
I need to print the first field first then last two fields should come next and then i need to print rest of the fields.
Input :
a1,abc,jsd,fhf,fkk,b1,b2
a2,acb,dfg,ghj,b3,c4
a3,djf,wdjg,fkg,dff,ggk,d4,d5
Expected output:
a1,b1,b2,abc,jsd,fhf,fkk... (6 Replies)
I'm trying to compare 2 files for differences in a selct number of fields. When differnces are found it will write the whole record of the second file including appending '|C' out to a delta file. Each record will have 20 fields, but only want to do comparison of 1st 15 fields. The 1st field of... (7 Replies)
Hi
I have a file as below
<field1> <field2> <field3> ... <field_num1> <field_num2>
Trying to sort based on difference of <field_num1> and <field_num2> in desceding order and print all fields.
I tried this and it doesn't sort on the difference field .. Appreciate your help.
cat... (9 Replies)
Discussion started by: newstart
9 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)