03-29-2013
Not too many folks know SCO - I'm one of those un-knowing types.
You can mount a native file core dump file (from SCO on another SCO box) as either USB or as an ISO image on cdrom. Core dumps DO NOT contain all of the file systems' data, just what was in memory at the time of the dump. If you need to do data recovery try:
1. mount the disk from the crashed system onto another SCO box as just a plain old ufs (or whatever filesystem it was ) filesystem. If the disk is slightly corrupted you can use tools like fsck to fix the file system.
2. send the disk to a data recovery service
If my answer seem weird, it is because I probably did not get what you wanted, and made bad assumptions.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
HI ALL,
I need to backup HDD with SCO UNIX. I need to have a full functionaly backup of this hard disk. Does anybody have any tool or subsription how to do it. I tried some SW, but after when I tried to use this copy of my original disk "can not find a root directory". Thanks in advance. (1 Reply)
Discussion started by: jardas
1 Replies
2. SCO
Hi guys,
I have this quick question , is it posible to isntall SCO 5.0.7 on a serial ATA and if it is can you tell me how or maybe a website that has some info about this.
I'm not using any raid, just one HDD.
Thanks a lot (0 Replies)
Discussion started by: josramon
0 Replies
3. UNIX for Advanced & Expert Users
Hello,
I have a P4, 2.4GHz, 256MB ASROCK mainboard: I am trying to install sco 5.0.5 on an 80gb hdd IDE .
I have tried the following techniques:
1. using the updated wd btld image- no success
2. defbootstr biosgeom
3. use interactive divvy, make adjustments using dkinit/dparam during... (0 Replies)
Discussion started by: pude
0 Replies
4. Solaris
Hi Friends,
I am using VMware 6.0 and i want to transfer some files from External HDD so how to mount the Disk, and i am not able to assign any ip to my network card any one can help me how to set ip in VMware.
Thanks and Regards,
Venky.:b: (0 Replies)
Discussion started by: 1409.venkatesh
0 Replies
5. Windows & DOS: Issues & Discussions
Hi,
Unix based,
My harddrive won't boot and I'm looking for a reliable tool
that can mount a hdd on Windows XP and show me the files
stored on a NFS system.
I tried the tool: Ext2IFS but this didn't work.
I found a lot of tools on google to mount nfs share thru a network
but that's... (1 Reply)
Discussion started by: severt
1 Replies
6. SCO
Hi guys,
I have this problem ,
One of our client's hdd went down and we cannot boot up the machine , I've installed a new hdd with a fresh copy of SCO 5.0.6 same as the one in the old HDD, i think the data still good in the old HDD.
My question!!!
How can i access the data from the fresh... (4 Replies)
Discussion started by: josramon
4 Replies
7. Filesystems, Disks and Memory
I started on another thread and full story can be seen here: https://www.unix.com/security/91428-how-reset-root-password-old-unix-system-v.html
But my situation turned to land on this thread now.
I have old scsi HDD out of the UHC UNIX System V Rel. 4.0 Version 3.6 box. And need to read... (1 Reply)
Discussion started by: 82026
1 Replies
8. Solaris
Hi,
I need to create 4 zones.
I have an array with a RAID5 volume. I have exported 4 LUNS from the array. Now my host see the 4 LUNS as raw devices.
I am partitioning each LUN using format then mounting each slice on the global zone. Then I am using each slice as a file system for my non... (3 Replies)
Discussion started by: general_lee
3 Replies
9. Solaris
I just installed Solaris 11.2 - and it is a bugger. How do I mount an extra HDD that is now formated to NTFS through gparted
it keeps telling me I don't have any ntfs on this laptop. it has two hdds, /dev/sda1 /dev/sdb1 (Linux lingo) Solaris is installed on primary hard drive back of it. then... (2 Replies)
Discussion started by: userx-bw
2 Replies
10. Emergency UNIX and Linux Support
rying it this way, because I can't handle the slices for the second hdd. If there is someone on this forum who can help me out of that misery, he would really save my digital life in this digital ocean.
So not giving up, reading several times the manual of gpart. But the best hint in all that... (0 Replies)
Discussion started by: 1in10
0 Replies
UBT(4) BSD Kernel Interfaces Manual UBT(4)
NAME
ubt -- USB Bluetooth driver
SYNOPSIS
ubt* at uhub? port ? configuration ? interface ?
DESCRIPTION
The ubt driver provides support for USB Bluetooth dongles to the Bluetooth protocol stack.
USB Bluetooth dongles provide two interfaces, both of which the ubt driver claims. The second interface is used for Isochronous data and
will have several alternate configurations regarding bandwidth consumption, which can be set using the hw.ubtN.config sysctl(8) variable.
The number of alternate configurations is indicated by the value in the hw.ubtN.alt_config variable, and the isoc frame size for the current
configuration is shown in the hw.ubtN.sco_rxsize and hw.ubtN.sco_txsize variables.
By default, configuration 0 is selected, which means that no bandwidth is used on the Isochronous interface and no SCO data can be sent.
Consult the Bluetooth USB specification at https://www.bluetooth.org/ for complete instructions on setting bandwidth consumption. The fol-
lowing extract may be useful as a general guidance though details may differ between manufacturers.
0 No active voice channels
1 One voice channel with 8-bit encoding
2 Two voice channels with 8-bit encoding, or one voice channel with 16-bit encoding.
3 Three voice channels with 8-bit encoding
4 Two voice channels with 16-bit encoding
5 Three voice channels with 16-bit encoding
SEE ALSO
bluetooth(4), uhub(4), sysctl(8)
HISTORY
This ubt device driver was originally a character device written by David Sainty and Lennart Augustsson. It was rewritten to support socket
based Bluetooth access for NetBSD 4.0 by Iain Hibbert.
CAVEATS
Isochronous data is seemingly not well supported over USB in the current system and to get SCO working, you may have to calculate the SCO
packet size that the stack will use. This is the sco_mtu value reported by the btconfig(8) command, and when combined with the SCO header (3
bytes) should fit exactly into an integer number of Isochronous data frames where the frame size is indicated by the 'hw.ubtN.sco_txsize'
sysctl variable.
For example: I want one voice channel (which is all that is supported, for now) so am using configuration #2, with a frame length of 17
bytes. This gives possible values of:
(17 * 1) - 3 = 14
(17 * 2) - 3 = 31
(17 * 3) - 3 = 48
(17 * 4) - 3 = 65
(17 * 5) - 3 = 82
etc.
btconfig(8) shows the maximum SCO payload as 64 bytes, so I am using the next smaller size of 48, to minimize the overhead of the 3 header
bytes.
The SCO packet size can be changed using the 'scomtu' option to btconfig(8).
The failure mode is that the USB Bluetooth dongle locks up though generally removal/reinsertion will clear the problem.
BUGS
The Isochronous configuration can only be changed when the device is not marked up.
BSD
August 27, 2006 BSD