One way is to synchronize with a select (or poll) and set the fd's to non-blocking.
Once the read gets a \n or a write sends an \n - leave the function - I would not use threads. Unless this is a school assignment.
Use select or poll on both. Never block on a read or a write like you are currently doing.
select() will block for you until one fd (ex, read or write) becomes ready for i/o.
pseudocode: use 3 fd's
If you get a file closed return it means some happened - user quit with ctrl/D or CISCO went South.
Last edited by jim mcnamara; 03-17-2013 at 11:27 AM..
This User Gave Thanks to jim mcnamara For This Post:
i would like advice on the usbject of c programming (in the middle of reading a book on C). could i benefit more if i apply that knowledge in the unix format if i were able to, or would that take the point out of learning C, basically I want to stay away from strying too far away from unix and use... (1 Reply)
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Hello,
I am trying to learn Networking Programming in C in unix enviorment. I want to know how good it is to become a network programmer. i am crazy about Network programming but i also want to opt for the best carreer options. Anybody experienced Network Programmer, please tell me is my... (5 Replies)
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Can someone help me on suggesting some ways to access the memory content in RAM directly from C/C++ source code.
Please provide me any book name or any URL so that I can get an exhaustive
knowledge over it.
If possible please give me some tips on interacting with hardwares directly
through... (3 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
Hi,
This is my first post here.
I would like to ask: how to connect the barcode scanner to the serial port?
What are the names in the system (in / dev) and serialport1 serialport0?
Please help with this.
Regards. (2 Replies)
Hello,
I am using the termios library to write data that I get from a Bluetooth device to a modem via serial.
The data arrive from the Bluetooth device correctly every 50ms and I have to bypass them on the serial ttyUSB3 where it is connected to a modem connected to a socket with static IP.
The... (10 Replies)
Hello.
I like Linux and C programming language. Allways wanted to understand kernel and become a Linux system programmer. And I also like Objective-C and iOS. These two programming areas have relations:
1. Linux and iOS are UNIX-like systems, POSIX compliant.
2. It is useful to know C language... (2 Replies)
Discussion started by: Rockatansky
2 Replies
LEARN ABOUT OSX
pcap_get_selectable_fd
PCAP_GET_SELECTABLE_FD(3PCAP)PCAP_GET_SELECTABLE_FD(3PCAP)NAME
pcap_get_selectable_fd - get a file descriptor on which a select() can be done for a live capture
SYNOPSIS
#include <pcap/pcap.h>
int pcap_get_selectable_fd(pcap_t *p);
DESCRIPTION
pcap_get_selectable_fd() returns, on UNIX, a file descriptor number for a file descriptor on which one can do a select() or poll() to wait
for it to be possible to read packets without blocking, if such a descriptor exists, or -1, if no such descriptor exists. Some network
devices opened with pcap_create() and pcap_activate(), or with pcap_open_live(), do not support select() or poll() (for example, regular
network devices on FreeBSD 4.3 and 4.4, and Endace DAG devices), so -1 is returned for those devices.
Note that in:
FreeBSD prior to FreeBSD 4.6;
NetBSD prior to NetBSD 3.0;
OpenBSD prior to OpenBSD 2.4;
Mac OS X prior to Mac OS X 10.7;
select() and poll() do not work correctly on BPF devices; pcap_get_selectable_fd() will return a file descriptor on most of those versions
(the exceptions being FreeBSD 4.3 and 4.4), but a simple select() or poll() will not indicate that the descriptor is readable until a full
buffer's worth of packets is received, even if the read timeout expires before then. To work around this, an application that uses
select() or poll() to wait for packets to arrive must put the pcap_t in non-blocking mode, and must arrange that the select() or poll()
have a timeout less than or equal to the read timeout, and must try to read packets after that timeout expires, regardless of whether
select() or poll() indicated that the file descriptor for the pcap_t is ready to be read or not. (That workaround will not work in FreeBSD
4.3 and later; however, in FreeBSD 4.6 and later, select() and poll() work correctly on BPF devices, so the workaround isn't necessary,
although it does no harm.)
Note also that poll() doesn't work on character special files, including BPF devices, in Mac OS X 10.4 and 10.5, so, while select() can be
used on the descriptor returned by pcap_get_selectable_fd(), poll() cannot be used on it those versions of Mac OS X. Kqueues also don't
work on that descriptor. poll(), but not kqueues, work on that descriptor in Mac OS X releases prior to 10.4; poll() and kqueues work on
that descriptor in Mac OS X 10.6 and later.
pcap_get_selectable_fd() is not available on Windows.
RETURN VALUE
A selectable file descriptor is returned if one exists; otherwise, -1 is returned.
SEE ALSO pcap(3PCAP), select(2), poll(2)
5 April 2008 PCAP_GET_SELECTABLE_FD(3PCAP)