03-14-2013
I was wondering about the situation when having two disks in RAID 0 setup, with one distinctly faster than the other. Would the faster disk be overkill, because the speed gain is not utilised to its full advantage? In other words, would software have to be written to use the faster disk more often?
8 More Discussions You Might Find Interesting
1. BSD
Now that SSD drives are becoming mainstream, I had a few questions on installing a SSD drive in a FreeBSD environment. Can FreeBSD be made SSD aware, that is, somehow let FreeBSD know that reads and writes should be limited or deferred to extend the disk's life? Is there a setting for wear... (0 Replies)
Discussion started by: figaro
0 Replies
2. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
3. AIX
Hi,
does anyone here happen to know if I could run GLVM or GPFS on Solid State Disks?
I have a high volume / high transaction Sybase HACMP cluster currently setup with SRDF to the DR datacentre. My business now considers to move everything to SSD storage but we still need to get the data to... (0 Replies)
Discussion started by: zxmaus
0 Replies
4. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
5. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
6. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
7. UNIX for Dummies Questions & Answers
Hello All,
I recently received a new SSD that I am going to use for the purpose of Booting Virtual Machines. I use VMWare Player to boot Windows Guest Operating Systems onto my Linux Laptop.
I currently have a SSD drive that I use for this exact same purpose that is formatted as ext3 and I'm... (3 Replies)
Discussion started by: mrm5102
3 Replies
8. Linux
I'm running glusterfs on CentOS 6.6 two nodes, (the SSD (samsung 840 1TB x2) is RAID 0 on the HP DL380 G6) x2, and trimming is not enable on it by checking /dev/sdb1/xxxxx/discard_max_bytes=0. Do I still need trimming? Somehow my filesystem is fine with 35-30% free space and running very fast.
... (1 Reply)
Discussion started by: itik
1 Replies
vxpfto(1M) vxpfto(1M)
NAME
vxpfto - set Powerfail Timeout (pfto)
SYNOPSIS
vxpfto -g diskgroup -t timeout
vxpfto [-g diskgroup] -t timeout volume_list
vxpfto [-g diskgroup] -o pftostate={enabled|disabled}
vxpfto [-g diskgroup] -o pftostate={enabled|disabled} volume_list
DESCRIPTION
Powerfail Timeout is an attribute of a SCSI disk connected to an HP-UX host (see the pfto(7) man page). The vxpfto command sets the Power-
fail Timeout interval on a set of Volume Manager disks, either all disks in a disk group, or all disks underlying the volumes listed.
The first form of the command sets the same PFTO value for all the disks in the specified VxVM diskgroup.
In the second form, all disks underlying the given list of volumes are selected, optionally restricted by the disk group specified with the
-g option. If you specify a diskgroup, any volume in the list not belonging to the diskgroup is ignored.
Use the -o pftostate option to disable or enable PFTO. By default, PFTO is enabled. You can enable PFTO either on all disks in a disk
group, or on all disks underlying the volumes listed.
If you invoke vxpfto without arguments, it displays a usage message.
OPTIONS
-g diskgroup
Specifies the disk group for the operation, either by disk group ID or by disk group name.
-o pftostate={enabled|disabled}
Enables or disables the use of PFTO for IO.
-t timeout
Specifies the PFTO value in seconds. The value must be zero or a positive integer. Zero represents the system default PFTO
value. The default value depends on the disk driver controlling the disk device.
volume_list
A list of VxVM volume names. List items must be separated by white-space.
EXIT CODES
vxpfto returns a zero if successful. If it encounters an error, vxpfto exits and displays a message on standard error. Defined exit codes
are:
0 Success.
1 No PFTO value specified.
2 No diskgroup or volume list specified.
3 Illegal PFTO value specified.
EXAMPLES
Set the PFTO value on all disks in disk group testdg to 100 seconds:
vxpfto -t 100 -g testdg
Set the PFTO value to 50 seconds on all disks underlying volume01 and volume02 in disk group testdg:
vxpfto -t 50 -g testdg volume01 volume02
Set the PFTO value to 300 seconds on all disks underlying volume01 and volume02, even though they are not in the same disk group:
vxpfto -t 300 volume01 volume02
Disable PFTO on all disks in disk group testdg:
vxpfto -g testdg -o pftostate=disabled
Enable PFTO on all disks underlying volume01 and volume02i in disk group testdg:
vxpfto -g testdg -o pftostate=enabled volume01 volume02
SEE ALSO
vxdisk(1M), pfto(7)
VxVM 5.0.31.1 24 Mar 2008 vxpfto(1M)