Sponsored Content
Full Discussion: Storage Array not readable
Operating Systems Solaris Storage Array not readable Post 302780041 by DukeNuke2 on Wednesday 13th of March 2013 05:02:13 PM
Old 03-13-2013
what do you mean with "boot it normally"?

you can use the above commands and try to see the array (or better the volumes created on the array; if there are any) from ok prompt. then boot the system with "-r" (reconfigure) to create /dev and /devices entries for the new volumes on solaris and check the output of format.

also you can check the storages documentation:
http://docs.oracle.com/cd/E19247-01/index.html
 

6 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Storage array question

We just purchased a MOD30 disk array strage system. We have 15 drives and 2 hot spares. We're running a database app with 8 data sets. I'm trying to get the best i/o speed out of my disk configuration. Right now I have 3 raid5 arrays setup. This seems to offer the same performance as having the... (1 Reply)
Discussion started by: ncmurf00
1 Replies

2. Solaris

storage array simulator

hi i haven't much experience in solaris. I would like to know about storage. how to configure,how it is working etc....can i get any simulator for doing these work? plaese send me the link . please help me advance thanks to all (2 Replies)
Discussion started by: sijocg
2 Replies

3. Solaris

Shared Storage Array is DEGRADED

Hi, On my X4200 Galaxy cluster, when i plugged out the both cables of Controller A (connected to Node 1 and Node2) , status of registered array became "Degraded". After plugging -in the cables , i should get the status of array as "OK" but i am not getting the status OK. I am using CAM... (2 Replies)
Discussion started by: deepaksharma
2 Replies

4. Solaris

A1000 Disk storage array

I am new to the unix world. I have SunBlade 100 and A1000 Disk storage array with 12 Hard drives. I used SCSI card and SCSI cables to connect. When I do the format command,I can see disk storage as one disk instead of 12 disks as below. Could anybody can explain why? What should I do in order... (1 Reply)
Discussion started by: Dulasi
1 Replies

5. HP-UX

HP Storage Array

hi I need to check status and configure HP Storage Array device. HP Storageworks P2000 Please suggest (0 Replies)
Discussion started by: anand87
0 Replies

6. AIX

Migrating LUNs to new storage array

All, I have a AIX server with multiple volumes and I need to move them from a legacy storage SAN to a new SAN. We are concerned because to use mirrorvg as we would have to run on a single HBA (one on the old SAN and one on the new). Our other option is to use an appliance to do a block... (3 Replies)
Discussion started by: bkchicago
3 Replies
volunroot(8)						      System Manager's Manual						      volunroot(8)

NAME
volunroot - Remove Logical Storage Manager hooks for rootable volumes SYNOPSIS
/usr/sbin/volunroot [-a | -A] OPTIONS
Specifies that all volumes on the system disk be converted back to UNIX disk partitions, not just the root and swap volumes, rootvol and swapvol. Forces removal of the private region unless it is the last one in the system. DESCRIPTION
The volunroot script can be used to restore the accessibility of the root, swap, and other file systems on the boot disk directly through disk partitions instead of through volume devices. The script also removes other changes that were made to enable booting of the system from the root volume, so that the system will boot with no dependency on the Logical Storage Manager. When used with no options, volunroot affects only the root and swap volumes, rootvol and swapvol. For volunroot to work properly, only one plex must exist for each of the affected volumes. This plex must be the one created by volrootmir or the original plex created when the root disk was encapsulated. This ensures that the underlying subdisks will have equivalent partitions defined for them on the disk. If these conditions are not met, the volunroot operation fails and none of the volumes are converted to disk partitions. The unwanted plexes can be removed using either voledit or volplex. SEE ALSO
volencap(8), voldiskadm(8), voledit(8), volintro(8), volplex(8), volrootmir(8) volunroot(8)
All times are GMT -4. The time now is 05:49 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy