I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
Hello,
I have a routeur linksys (192.168.1.1 ) a firewall (192.168.1.55 IN ----> 192.168.2.254 OUT) which using iptable
I want to acces to an equipment (lorex video camera serveur 192.168.2.44) which using an ddns service on the port 9000
So i don t know which redirection a will do on the... (2 Replies)
I am having an issue with iptables. My server is a RHEL6 64bit system.
In my application I have a large number of connected clients ~100k to a particular service. The application works fine when iptables is off, 100k clients are able to connect.
However, when I turn iptables on and add a... (1 Reply)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT MOJAVE
tc-fw
Firewall mark classifier in tc(8) Linux Firewall mark classifier in tc(8)NAME
fw - fwmark traffic control filter
SYNOPSIS
tc filter ... fw [ classid CLASSID ] [ action ACTION_SPEC ]
DESCRIPTION
the fw filter allows to classify packets based on a previously set fwmark by iptables. If it is identical to the filter's handle, the fil-
ter matches. iptables allows to mark single packets with the MARK target, or whole connections using CONNMARK. The benefit of using this
filter instead of doing the heavy-lifting with tc itself is that on one hand it might be convenient to keep packet filtering and classifi-
cation in one place, possibly having to match a packet just once, and on the other users familiar with iptables but not tc will have a less
hard time adding QoS to their setups.
OPTIONS
classid CLASSID
Push matching packets to the class identified by CLASSID.
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
EXAMPLES
Take e.g. the following tc filter statement:
tc filter add ... handle 6 fw classid 1:1
will match if the packet's fwmark value is 6. This is a sample iptables statement marking packets coming in on eth0:
iptables -t mangle -A PREROUTING -i eth0 -j MARK --set-mark 6
SEE ALSO tc(8), iptables(8), iptables-extensions(8)iproute2 21 Oct 2015 Firewall mark classifier in tc(8)