02-28-2013
Hard disk partition on Original windows 7 Home Premium
Respected Members,
I am using compaq CQ41, with factory install windows 7, there is three drives namely (local Disk( c: ) 158 GB free of 281 GB), (RECOVERY( D: ) 2.69 GB free of 16.7GB) and (HP_TOOLS( E: ) 92.7 MB free of 99.3 MB).
i don't want to lost it,but want to make my system dual boot, so that i can use LINUX, for that purpose i want to make partition in "Local Disk ( c: )" .
I have use "Shrink volume" under "Computer Management" but it shrinks only 5271 MB.
Please show me the way
Thanks and regards
Vijay Tyagi
---------- Post updated 03-01-13 at 07:53 AM ---------- Previous update was 02-28-13 at 03:25 PM ----------
I have achive half gole, i delete all unwanted data and then do disk defragmentation, then reboot the system and then shrink the disk and now i get a partition of 115 GB, but this partition is not showing by computer during reboot to install another OS(Linux Mint 14), so that my copmuter can become dual boot.
Thanks and Regards
Vijay Tyagi
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have one hard disk on my computer ( 8 Giga-bytes) and i
installed windows 98 on drive C ( I have 4 drives : C , D , E , F which drive has 2 Giga-bytes space on it )
On which drive ( from 4 drives ) I have a lot data for example : on drive D I store most of my programs which i downloaded from... (7 Replies)
Discussion started by: yoffe_adi
7 Replies
2. UNIX for Dummies Questions & Answers
Hello everyone.
I am new to Linux so hope some one could help me here.
I have a 30 Gb HD and windows Xp is my O/S, HD is not partitioned,but I want to Partitioned it, so I could Install Knoppix(Linux)on one of the partitioned one, how could I do this? OR should I erase every thing and then... (1 Reply)
Discussion started by: amir
1 Replies
3. UNIX for Advanced & Expert Users
HI,
Currently I am working in One of the webhosting company and I found
on one of my server "/home" partition is getting full say 105% usage...
But when I actually check the partition size using "du -h", exact partition
utilization is only 60-70%.
So... (1 Reply)
Discussion started by: jagdish.machhi@
1 Replies
4. Solaris
Not sure why solaris couldn't detect the geometry of a hard disk which has a working OS of winxp pro.
Is it due to the different OS that the partition information is stored in different location?
When I type '"format" it is shown as below,
c3d1 < drive type unknown>... (5 Replies)
Discussion started by: just.srad
5 Replies
5. SCO
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies
6. Solaris
The following is the summarry:-
1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced.
c1t0d0 and c1t2d0 are mirrors.
c1t1d0 and c1t3d0 are mirrors.
Metadb to be deleted is in c1t2d0s7
a) Mirror d35 has 2 submirrors d38 and d39
d38 is a stripe... (0 Replies)
Discussion started by: aji1729
0 Replies
7. Solaris
Hi, guys
I am a super newbie in solaris admin....
Now I got a problem.
Due to the broken of one of Raid system, some user home directory is missing.
Someone advises me to relocate the home directory on the new drive.
I have googled and have tried " usermode -d " command.
But I found a... (3 Replies)
Discussion started by: dr_dw
3 Replies
8. Linux
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
9. Filesystems, Disks and Memory
Hi Experts
I would like to know different between soft partition concept and hard partition concept on solaris.
Here is little explanation between soft partition concept and hard partition concept on solaris.
Soft Partition:
1TB total space available in storage in all mapped to the OS to... (2 Replies)
Discussion started by: edydsuranta
2 Replies
10. Solaris
Hi,
It is Solaris-10 with ZFS. c0t1d0 is original disk. c0t0d0 was faulty disk, which was replaced with new one and by mistake somebody ran opposite command
# prtvtoc /dev/rdsk/c0t0d0s0 | fmthard -s - /dev/rdsk/c0t1d0s0
Now rpool is in suspended state. Right now server is up, but allowing ssh... (6 Replies)
Discussion started by: solaris_1977
6 Replies
LEARN ABOUT LINUX
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)