I have one of the disk missing in my NIMVG. My doubt is can I remove this hdisk2 online ? few of the file systems seems to be spread over 7 PV's. that's why i'm worried. Can someone suggest if I can replace this disk online. Also how to check if there is some data present in hdisk2 alone which is not mirrored to the other disks.
I have a bogus disk that keeps showing up as failed from vxdisk list
- - disk hpdg failed was:c2t0d11s2
There isnt any c2 devices on the system:
# ls /dev/dsk/c2*
/dev/dsk/c2*: No such file or directory
# ls /dev/rdsk/c2*
/dev/rdsk/c2*: No such file or... (3 Replies)
Hello,
I've got 2 system disks (hdisk0 and hdisk1) in the mirror (RAID1) on AIX 5.3. Since the hdisk1 makes some troubles, we want to replace it with the new one. How can I disable this hdisk1 disk and prepare the mirror to use the new physical disk? As far as I know, I must remove disk from the... (3 Replies)
Hello once again seeking your help,
I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk.
can anybody point me out on how to get this done.
Thanks!! (3 Replies)
Hello experts.
I am using Solaris 10(2005) on intel machine. I have installed Veritas Volume manager 5.0. I am unable to bring a disk error to online state. I would like to bring that disk to CDS format.
Commands i used and output are....
#vxdisk list
DEVICE TYPE ... (11 Replies)
Hi
I'm a little rusty with HACMP, but wanted to find out if it is possible to remove a disk heartbeat network from a running HACMP cluster.
Reason is, I need to migrate all the SAN disk, so the current heartbeat disk will be disappearing. Ideally, I'd like to avoid taking the cluster down to... (2 Replies)
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
I accidently added a disk in different zpool instead of pool, where I want.
root@prtdrd21:/# zpool status cvfdb2_app_pool
pool: cvfdb2_app_pool
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
cvfdb2_app_pool ONLINE 0 0 0... (1 Reply)
I added a disk to a zpool using "zpool add diskname"
My intention was mirror a zpool disk that no mirror; that is a zpool with only one disk. I did not issue the right command. Now, the disk has been added successfully but I cannot remove nor detach it as Solaris 11 thinks it has data on it... (14 Replies)
Hi all, I have a LUN that is in "Online Busy" when I issue the dev_gestate subcommand of luxadm:
root@es088wb6:~# luxadm -v -e dev_getstate /dev/rdsk/c21t50050763090887FEd4s2
phys path = "/devices/pci@6c0/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w50050763090887fe,4:c,raw"
... (5 Replies)
Discussion started by: ludiegu
5 Replies
LEARN ABOUT X11R4
systemd-networkd-wait-online.service
SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8) systemd-networkd.service SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8)NAME
systemd-networkd-wait-online.service, systemd-networkd-wait-online - Wait for network to come online
SYNOPSIS
systemd-networkd-wait-online.service
/lib/systemd/systemd-networkd-wait-online
DESCRIPTION
systemd-networkd-wait-online is a one-shot system service that waits for the network to be configured. By default, it will wait for all
links it is aware of and which are managed by systemd-networkd.service(8) to be fully configured or failed, and for at least one link to
gain a carrier.
OPTIONS
The following options are understood:
-i, --interface=
Network interface to wait for before deciding if the system is online. This is useful when a system has several interfaces which will
be configured, but a particular one is necessary to access some network resources. This option may be used more than once to wait for
multiple network interfaces. When used, all other interfaces are ignored.
--ignore=
Network interfaces to be ignored when deciding if the system is online. By default, only the loopback interface is ignored. This option
may be used more than once to ignore multiple network interfaces.
--timeout=
Fail the service if the network is not online by the time the timeout elapses. A timeout of 0 disables the timeout. Defaults to 120
seconds.
SEE ALSO systemd(1), systemd-networkd.service(8)systemd 237SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8)