root@test1:/>chvg -g rootvg
0516-1380 chvg: Re-sizing of the disks is not supported for the rootvg.
0516-732 chvg: Unable to change volume group rootvg.
Hello folks,
I have a sun sparcstation 20, I would like to upgrade one of the hard disks to a larger one. The one I would like to upgrade only contains user data. Here are my thoughts:
1. Backup the specific file system
2. Replace the disk with the larger disk
3. Create a new file... (2 Replies)
could anyone give me a general idea of how i may clone a 2 Gig disk running Solaris 7 on it to another disk of the same size?
currently, this system only has one disk in it though. i do have the ability to hook up another disk via SCSI.
i have been told i need to boot to "miniroot" to run... (9 Replies)
I have just been assigned the task of upgrading to a larger disk on a e250; however, I am use to working on Linux and x86 hardware. I would be very appreciative if someone could inform me on how this procedure can be done safely.
To begin with, the e250 has a 18 Gig primary scsi disk and a 18... (3 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
Dear friends & gurus
i have some servers running solaris 10 intel machines,they are in mirror disk 2 disk there is no any hardware RAID only software RAID and they are in remote place.
1) solaris 10 OS c0t0d0(Disk1) & cotod1(Disk2) in mirror (SVM)
2) i want to break the mirror
3) boot... (0 Replies)
Guys can anyone tell how can we do faster disk cloning
Below i found in google
1. dd if=/dev/sda of=/dev/sdb bs=4096 conv=noerror,sync
So adding "conv=noerror,sync " makes it faster looks against not adding it
2. Enable write cache activated (hdparm -W1 /dev/sda) then run dd ..
... (2 Replies)
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Hello to all,
Im having a new task in a new world (AIX - IBM Servers)
I have an IBM Server (Type - 9111-285 very old one) with one Hard disk (73 GB 10 K) with AIX 5.x, and I need to clone the existing disk to another with the same specifications.
Could you please give me some advice in order... (7 Replies)
Discussion started by: trevian3969
7 Replies
LEARN ABOUT SUNOS
vgreduce
VGREDUCE(8) System Manager's Manual VGREDUCE(8)NAME
vgreduce - reduce a volume group
SYNOPSIS
vgreduce [-a|--all] [-A|--autobackup y|n] [-d|--debug] [-h|-?|--help] [--removemissing] [-t|--test] [-v|--verbose] VolumeGroupName [Physi-
calVolumePath...]
DESCRIPTION
vgreduce allows you to remove one or more unused physical volumes from a volume group.
OPTIONS
See lvm for common options.
-a, --all
Removes all empty physical volumes if none are given on command line.
--removemissing
Removes all missing physical volumes from the volume group, if there are no logical volumes allocated on those. This resumes normal
operation of the volume group (new logical volumes may again be created, changed and so on).
If this is not possible (there are logical volumes referencing the missing physical volumes) and you cannot or do not want to remove
them manually, you can run this option with --force to have vgreduce remove any partial LVs.
Any logical volumes and dependent snapshots that were partly on the missing disks get removed completely. This includes those parts
that lie on disks that are still present.
If your logical volumes spanned several disks including the ones that are lost, you might want to try to salvage data first by acti-
vating your logical volumes with --partial as described in lvm (8).
SEE ALSO lvm(8), vgextend(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) VGREDUCE(8)