root@test1:/>lsvg rootvg
VOLUME GROUP: rootvg VG IDENTIFIER: 00c7780e00004c000000013b4d2a9ce3
VG STATE: active PP SIZE: 512 megabyte(s)
VG PERMISSION: read/write TOTAL PPs: 19 (9728 megabytes)
MAX LVs: 256 FREE PPs: 0 (0 megabytes)
LVs: 10 USED PPs: 19 (9728 megabytes)
OPEN LVs: 9 QUORUM: 1
TOTAL PVs: 1 VG DESCRIPTORS: 2
STALE PVs: 0 STALE PPs: 0
ACTIVE PVs: 1 AUTO ON: yes
MAX PPs per VG: 32512 0
MAX PPs per PV: 1016 MAX PVs: 32
LTG size (Dynamic): 256 kilobyte(s) AUTO SYNC: no
HOT SPARE: no BB POLICY: relocatable
will running this command help
Code:
chvg -t 2 rootvg
0516-1193 chvg: WARNING, once this operation is completed, volume group rootvg
cannot be imported into AIX 430 or lower versions. Continue (y/n) ?
y
0516-1164 chvg: Volume group rootvg changed. With given characteristics rootvg
can include upto 16 physical volumes with 2032 physical partitions each.
Hello folks,
I have a sun sparcstation 20, I would like to upgrade one of the hard disks to a larger one. The one I would like to upgrade only contains user data. Here are my thoughts:
1. Backup the specific file system
2. Replace the disk with the larger disk
3. Create a new file... (2 Replies)
could anyone give me a general idea of how i may clone a 2 Gig disk running Solaris 7 on it to another disk of the same size?
currently, this system only has one disk in it though. i do have the ability to hook up another disk via SCSI.
i have been told i need to boot to "miniroot" to run... (9 Replies)
I have just been assigned the task of upgrading to a larger disk on a e250; however, I am use to working on Linux and x86 hardware. I would be very appreciative if someone could inform me on how this procedure can be done safely.
To begin with, the e250 has a 18 Gig primary scsi disk and a 18... (3 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
Dear friends & gurus
i have some servers running solaris 10 intel machines,they are in mirror disk 2 disk there is no any hardware RAID only software RAID and they are in remote place.
1) solaris 10 OS c0t0d0(Disk1) & cotod1(Disk2) in mirror (SVM)
2) i want to break the mirror
3) boot... (0 Replies)
Guys can anyone tell how can we do faster disk cloning
Below i found in google
1. dd if=/dev/sda of=/dev/sdb bs=4096 conv=noerror,sync
So adding "conv=noerror,sync " makes it faster looks against not adding it
2. Enable write cache activated (hdparm -W1 /dev/sda) then run dd ..
... (2 Replies)
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Hello to all,
Im having a new task in a new world (AIX - IBM Servers)
I have an IBM Server (Type - 9111-285 very old one) with one Hard disk (73 GB 10 K) with AIX 5.x, and I need to clone the existing disk to another with the same specifications.
Could you please give me some advice in order... (7 Replies)
Discussion started by: trevian3969
7 Replies
LEARN ABOUT HPUX
dgcfgbackup
dgcfgbackup(1M)dgcfgbackup(1M)NAME
dgcfgbackup - create or update VxVM volume group configuration backup file
SYNOPSIS
/usr/sbin/dgcfgbackup [-f dg_conf_path ] dg_name
DESCRIPTION
The dgcfgbackup command saves the VxVM configuration for a disk group in a default or alternate configuration backup file (see the descrip-
tion of the-f option).
By default, dgcfgbackup is run automatically each time that a VxVM command changes the VxVM configuration. In this case, it always uses
the default configuration backup file. An existing default configuration backup file is renamed with an extension of .old.
Options and Arguments
dg_name Specifies the name of a disk group.
-f dg_conf_path
Saves the configuration using an alternate file name specified by dg_conf_path. If this option is omitted, the default file name
is /etc/vxvmconf/dg_name.conf.
EXIT CODES
dgcfgbackup exits with a zero status on successful completion. An non-zero exit status indicates that errors occurred when information
from the disk group was being accessed.
EXAMPLES
Back up VxVM configuration information for disk group testdg in the default backup file /etc/vxvmconf/testdg.conf:
dgcfgbackup testdg
Back up VxVM configuration information for disk group datadg in the alternate configuration backup file /tmp/datadg.backup:
dgcfgbackup -f /tmp/datadg.backup datadg
NOTES
It is recommended that any alternate configuration backup file be created in the root file system (as is the case with the default path
name). This facilitates disk group recovery during maintenance mode, such as after a system crash.
AUTHOR
dgcfgbackup was developed by the Hewlett-Packard Company.
SEE ALSO dgcfgrestore(1M)VxVM 5.0.31.1 24 Mar 2008 dgcfgbackup(1M)