Hello folks,
I have a sun sparcstation 20, I would like to upgrade one of the hard disks to a larger one. The one I would like to upgrade only contains user data. Here are my thoughts:
1. Backup the specific file system
2. Replace the disk with the larger disk
3. Create a new file... (2 Replies)
could anyone give me a general idea of how i may clone a 2 Gig disk running Solaris 7 on it to another disk of the same size?
currently, this system only has one disk in it though. i do have the ability to hook up another disk via SCSI.
i have been told i need to boot to "miniroot" to run... (9 Replies)
I have just been assigned the task of upgrading to a larger disk on a e250; however, I am use to working on Linux and x86 hardware. I would be very appreciative if someone could inform me on how this procedure can be done safely.
To begin with, the e250 has a 18 Gig primary scsi disk and a 18... (3 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
Dear friends & gurus
i have some servers running solaris 10 intel machines,they are in mirror disk 2 disk there is no any hardware RAID only software RAID and they are in remote place.
1) solaris 10 OS c0t0d0(Disk1) & cotod1(Disk2) in mirror (SVM)
2) i want to break the mirror
3) boot... (0 Replies)
Guys can anyone tell how can we do faster disk cloning
Below i found in google
1. dd if=/dev/sda of=/dev/sdb bs=4096 conv=noerror,sync
So adding "conv=noerror,sync " makes it faster looks against not adding it
2. Enable write cache activated (hdparm -W1 /dev/sda) then run dd ..
... (2 Replies)
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Hello to all,
Im having a new task in a new world (AIX - IBM Servers)
I have an IBM Server (Type - 9111-285 very old one) with one Hard disk (73 GB 10 K) with AIX 5.x, and I need to clone the existing disk to another with the same specifications.
Could you please give me some advice in order... (7 Replies)
Discussion started by: trevian3969
7 Replies
LEARN ABOUT OSX
lvextend
LVEXTEND(8) System Manager's Manual LVEXTEND(8)NAME
lvextend - extend the size of a logical volume
SYNOPSIS
lvextend [--alloc AllocationPolicy] [-A|--autobackup y|n] [-d|--debug] [-h|-?|--help] [--noudevsync] [-i|--stripes Stripes [-I|--stripesize
StripeSize]] {-l|--extents [+]LogicalExtentsNumber[%{VG|LV|PVS|FREE|ORIGIN}] | -L|--size [+]LogicalVolumeSize[bBsSkKmMgGtTpPeE]}
[-f|--force] [-n|--nofsck] [-r|--resizefs] [-t|--test] [-v|--verbose] LogicalVolumePath [PhysicalVolumePath[:PE[-PE]]...]
DESCRIPTION
lvextend allows you to extend the size of a logical volume. Extension of snapshot logical volumes (see lvcreate(8) for information to cre-
ate snapshots) is supported as well. But to change the number of copies in a mirrored logical volume use lvconvert(8).
OPTIONS
See lvm for common options.
--noudevsync
Disable udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible
udev processing in the background. You should only use this if udev is not running or has rules that ignore the devices LVM2 cre-
ates.
-l, --extents [+]LogicalExtentsNumber[%{VG|LV|PVS|FREE|ORIGIN}]
Extend or set the logical volume size in units of logical extents. With the + sign the value is added to the actual size of the
logical volume and without it, the value is taken as an absolute one. The number can also be expressed as a percentage of the total
space in the Volume Group with the suffix %VG, relative to the existing size of the Logical Volume with the suffix %LV, of the
remaining free space for the specified PhysicalVolume(s) with the suffix %PVS, as a percentage of the remaining free space in the
Volume Group with the suffix %FREE, or (for a snapshot) as a percentage of the total space in the Origin Logical Volume with the
suffix %ORIGIN. The resulting value is rounded upward.
-L, --size [+]LogicalVolumeSize[bBsSkKmMgGtTpPeE]
Extend or set the logical volume size in units of megabytes. A size suffix of M for megabytes, G for gigabytes, T for terabytes, P
for petabytes or E for exabytes is optional. With the + sign the value is added to the actual size of the logical volume and with-
out it, the value is taken as an absolute one.
-i, --stripes Stripes
Gives the number of stripes for the extension. Not applicable to LVs using the original metadata LVM format, which must use a sin-
gle value throughout.
-I, --stripesize StripeSize
Gives the number of kilobytes for the granularity of the stripes. Not applicable to LVs using the original metadata LVM format,
which must use a single value throughout.
StripeSize must be 2^n (n = 2 to 9)
-f, --force
Proceed with size extension without prompting.
-n, --nofsck
Do not perform fsck before extending filesystem when filesystem requires it. You may need to use --force to proceed with this
option.
-r, --resizefs
Resize underlying filesystem together with the logical volume using fsadm(8).
Examples
"lvextend -L +54 /dev/vg01/lvol10 /dev/sdk3" tries to extend the size of that logical volume by 54MB on physical volume /dev/sdk3. This is
only possible if /dev/sdk3 is a member of volume group vg01 and there are enough free physical extents in it.
"lvextend /dev/vg01/lvol01 /dev/sdk3" tries to extend the size of that logical volume by the amount of free space on physical volume
/dev/sdk3. This is equivalent to specifying "-l +100%PVS" on the command line.
"lvextend -L+16M vg01/lvol01 /dev/sda:8-9 /dev/sdb:8-9"
tries to extend a logical volume "vg01/lvol01" by 16MB using physical extents /dev/sda:8-9 and /dev/sdb:8-9 for allocation of extents.
SEE ALSO fsadm(8), lvm(8), lvcreate(8), lvconvert(8), lvreduce(8), lvresize(8), lvchange(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVEXTEND(8)