01-30-2013
ZFS rpool physical disk move
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any gotchas i should know about, like with a mirror i would edit /etc/system comment out md and boot without it then re do the mirrot, etc.
How will ZFS react to this, should i offline the disk in the rpool first before pulling it?
Any input would be great thanks in advance.
solaris 11/11
zfs mirrored root pool
Sun X3-2 server
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello,
I need explanations about physical disks and physical volumes. What is the difference between these 2 things?
In fact, i am trying to understand what the AIX lspv2command does.
Thank you in advance. (2 Replies)
Discussion started by: VeroL
2 Replies
2. Solaris
Hi;
I have 4 new disks in a 6120 Array attached to a SUN server running zfs.
There are already two virtual disks on the array comprising of 3 disk raid 5 for each Vdisk.
I need to add two more disks to each vdisk making each a 5 disk raid 5 Vdisk.
If ZFS already has the original... (3 Replies)
Discussion started by: myjess
3 Replies
3. Solaris
Hi,
kstat -p -m zfs -n arcstats -s size returns
zfs:0:arcstats:size 8177310584
this values is approx (7.61 GB)
but my Physical Memory size is only 6144 Megabytes.
Can this happen ?
if yes, then how can I find free memory on the system.
BTW, I ran the kstat commands from a Non... (2 Replies)
Discussion started by: sapre_amit
2 Replies
4. Solaris
Hi,
I have Solaris-10 (release-7) box without any non global zone. I have a very critical change after couple of days from application side. For safer side, we want to keep few level of backups just in case of faliure. This server is having three pool
root@prod_ddoa01:/# zpool list
NAME SIZE... (2 Replies)
Discussion started by: solaris_1977
2 Replies
5. Solaris
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies
6. Solaris
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies
7. Solaris
Hi,
I have this fresh installation of Solaris 11.3 sparc.
I have two zfs pools both using two disks in mirroring mode, both are online.
I want to move /system/zones, currently rpool/VARSHARE/zones, from rpool to the other zfs pool so my zones don't consume space on the disks allocated to... (1 Reply)
Discussion started by: X96
1 Replies
8. Solaris
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies
9. Solaris
Generally, this is what we do:-
On primary, export 2 LUNs (add-vdsdev).
On primary, assign these disks to the ldom in question (add-vdisk).
On ldom, created mirrored zpool from these two disks.
On one server (which is older) we have:-
On primary, create mirrored zpool from the two LUNs.... (4 Replies)
Discussion started by: psychocandy
4 Replies
10. Solaris
I have a guest LDOM running Solaris 10U11 on a Sun T4-1 host running Solaris 11.4. The host has a disk named bkpool that I'd like to share with the LDOM so both can read and write it. The host is hemlock, the guest is sol10.
root@hemlock:~# zpool list
NAME SIZE ALLOC FREE CAP DEDUP ... (3 Replies)
Discussion started by: Michele31416
3 Replies
LEARN ABOUT OSF1
svatophys
svatophys(9r) svatophys(9r)
NAME
svatophys - General: Converts a system virtual address to a physical address
SYNOPSIS
kern_return_t svatophys(
vm_offset_t kern_addr,
vm_offset_t *phys_addr );
ARGUMENTS
Specifies the kernel virtual address. Specifies a pointer to the physical address to be filled in.
DESCRIPTION
The svatophys routine converts a system virtual address to the corresponding physical address. All address and data structure manipulation
done within the kernel is performed using system virtual addresses. Typically, system virtual addresses are a means of mapping physical
memory and I/O space, which often consists of device registers and DMA buffers. In contrast to this, devices are usually unaware of any
virtual addressing and for this reason use physical addresses. You use the svatophys routine to perform this address translation.
As an example of where you can use this address translation, a disk device driver can use DMA buffers to transfer blocks of data to the
disk (for the case of a write operation). The data to be written to disk is present in system memory at a system virtual address known to
the driver. To initiate the DMA operation, the disk driver can set up a command packet to specify a write operation to the underlying disk
controller hardware. This write command packet contains (among other things) the location of the DMA buffer as a physical address and the
length of the buffer. Here, the driver calls the svatophys routine to translate the system virtual address of the DMA buffer to a physical
address in the command packet issued to the disk driver.
RETURN VALUES
The svatophys routine returns the following: The address translation has been completed successfully. Unable to perform address transla-
tion. This value indicates that the address specified by the kern_addr argument is not a valid kernel or system virtual address.
svatophys(9r)