01-30-2013
ZFS rpool physical disk move
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any gotchas i should know about, like with a mirror i would edit /etc/system comment out md and boot without it then re do the mirrot, etc.
How will ZFS react to this, should i offline the disk in the rpool first before pulling it?
Any input would be great thanks in advance.
solaris 11/11
zfs mirrored root pool
Sun X3-2 server
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello,
I need explanations about physical disks and physical volumes. What is the difference between these 2 things?
In fact, i am trying to understand what the AIX lspv2command does.
Thank you in advance. (2 Replies)
Discussion started by: VeroL
2 Replies
2. Solaris
Hi;
I have 4 new disks in a 6120 Array attached to a SUN server running zfs.
There are already two virtual disks on the array comprising of 3 disk raid 5 for each Vdisk.
I need to add two more disks to each vdisk making each a 5 disk raid 5 Vdisk.
If ZFS already has the original... (3 Replies)
Discussion started by: myjess
3 Replies
3. Solaris
Hi,
kstat -p -m zfs -n arcstats -s size returns
zfs:0:arcstats:size 8177310584
this values is approx (7.61 GB)
but my Physical Memory size is only 6144 Megabytes.
Can this happen ?
if yes, then how can I find free memory on the system.
BTW, I ran the kstat commands from a Non... (2 Replies)
Discussion started by: sapre_amit
2 Replies
4. Solaris
Hi,
I have Solaris-10 (release-7) box without any non global zone. I have a very critical change after couple of days from application side. For safer side, we want to keep few level of backups just in case of faliure. This server is having three pool
root@prod_ddoa01:/# zpool list
NAME SIZE... (2 Replies)
Discussion started by: solaris_1977
2 Replies
5. Solaris
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies
6. Solaris
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies
7. Solaris
Hi,
I have this fresh installation of Solaris 11.3 sparc.
I have two zfs pools both using two disks in mirroring mode, both are online.
I want to move /system/zones, currently rpool/VARSHARE/zones, from rpool to the other zfs pool so my zones don't consume space on the disks allocated to... (1 Reply)
Discussion started by: X96
1 Replies
8. Solaris
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies
9. Solaris
Generally, this is what we do:-
On primary, export 2 LUNs (add-vdsdev).
On primary, assign these disks to the ldom in question (add-vdisk).
On ldom, created mirrored zpool from these two disks.
On one server (which is older) we have:-
On primary, create mirrored zpool from the two LUNs.... (4 Replies)
Discussion started by: psychocandy
4 Replies
10. Solaris
I have a guest LDOM running Solaris 10U11 on a Sun T4-1 host running Solaris 11.4. The host has a disk named bkpool that I'd like to share with the LDOM so both can read and write it. The host is hemlock, the guest is sol10.
root@hemlock:~# zpool list
NAME SIZE ALLOC FREE CAP DEDUP ... (3 Replies)
Discussion started by: Michele31416
3 Replies
LEARN ABOUT DEBIAN
amzfs-sendrecv
AMZFS-SENDRECV(8) System Administration Commands AMZFS-SENDRECV(8)
NAME
amzfs-sendrecv - Amanda script to create zfs sendrecv
DESCRIPTION
amzfs-sendrecv is an Amanda application implementing the Application API. It should not be run by users directly. It create a zfs snapshot
of the filesystem and backup the snapshot with 'zfs send'. Snapshot are kept after the backup is done, this increase the disk space use on
the client but it is neccesary to be able do to incremental backup. If you want only full backup, you can disable this feature by setting
the KEEP-SNAPSHOT property to 'NO'. Only the restoration of the complete backup is allowed, it is impossible to restore a single file.
The application is run as the amanda user, it must have many zfs priviledge:
zfs allow -ldu AMANDA_USER mount,create,rename,snapshot,destroy,send,receive FILESYSTEM
Some system doesn't have "zfs allow", but you can give the Amanda backup user the rights to manipulate ZFS filesystems by using the
following command:
usermod -P "ZFS File System Management,ZFS Storage Management" AMANDA_USER
This will require that your run zfs under pfexec, set the PFEXEC property to YES.
The format of the diskdevice in the disklist (DLE) must be one of:
Desciption Example
---------- -------
Mountpoint /data
ZFS pool name datapool
ZFS filesystem datapool/database
ZFS logical volume datapool/dbvol
The filesystem doesn't need to be mounted.
PROPERTIES
This section lists the properties that control amzfs-sendrecv's functionality. See amanda-applications(7) for information on the
Application API, application configuration.
DF-PATH
Path to the 'df' binary, search in $PATH by default.
KEEP-SNAPSHOT
If "YES" (the default), snapshot are kept after the backup, if set to "NO" then snapshot are no kept and incremental backup will fail.
ZFS-PATH
Path to the 'zfs' binary, search in $PATH by default.
PFEXEC-PATH
Path to the 'pfexec' binary, search in $PATH by default.
PFEXEC
If "NO" (the default), pfexec is not used, if set to "YES" then pfexec is used.
EXAMPLE
In this example, a dumptype is defined to use amzfs-sendrecv application to backup a zfs filesystem.
define application-tool amzfs_sendrecv {
comment "amzfs-sendrecv"
plugin "amzfs-sendrecv"
#property "DF-PATH" "/usr/sbin/df"
#property "KEEP-SNAPSHOT" "YES"
#property "ZFS-PATH" "/usr/sbin/zfs"
#property "PFEXEC-PATH" "/usr/sbin/pfexec"
#property "PFEXEC" "NO"
}
define dumptype user-zfs-sendrecv {
program "APPLICATAION"
application "amzfs_sendrecv"
}
SEE ALSO
amanda(8), amanda.conf(5), amanda-client.conf(5), amanda-applications(7)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHOR
Jean-Louis Martineau <martineau@zmanda.com>
Zmanda, Inc. (http://www.zmanda.com)
Amanda 3.3.1 02/21/2012 AMZFS-SENDRECV(8)