I'm sorry, but I found this a bit funny. How is it even possible to install a System Z RHEL on x86 platform?
---------- Post updated at 03:40 PM ---------- Previous update was at 03:37 PM ----------
dearsumon, you probably have to contact DELL to check if they provide NIC drivers (for this model) for RHEL.
---------- Post updated at 03:43 PM ---------- Previous update was at 03:40 PM ----------
I'm sure that you have checked ifconfig -a output as well. If you have not selected networking during installation /etc/sysconfig/network-scripts/ifcfg-eth0 does not get created. If eth0 shows up in ifconfig, then you have to manually create ifcfg-eth0 file.
Hi there,
I got a problem with my linux eth0.
It worked well, just one day when i boot it, "Failed" to be active.
The eth0 is inactive! I tried to use KDE network configuration tool to add the type of the eth card, I can't make it active. It gave me warning of "the eth card can't be... (1 Reply)
Hi all,
Thanks for reading and any posts.
Quick question, has anyone out there got any suggestions for standards of security for Redhat enterprise 3. We are making an RAC cluster Oracle application using Oracle 9i (hopefully moving to 10g sooner rather than later).
Thanks again for any... (0 Replies)
when i finish installed rhel 4.4 to my hp dl585 box, ifcfg-eth0 and ifcfg-eth1 is not available.when i ifconfig -a,i can not see the eth0 and eth1, only lo0 and si0. Unlike to the other server i found eth0 and eth1 files in
/etc/sysconfig/network-scripts/.
what will i do? (2 Replies)
Hi All,
I have to upgrade python installed on my Redhat enterprise Linux 4. I downloaded the latest python package from python website but not able to install the new package as the make command itself goes on running for more than a day. Can some help me regarding this. Is ther any method to... (2 Replies)
hi all
do i need to add rc. prefix on the stop script all the time especially on redhat 5 enterprise? like below
ln -s /etc/init.d/rc.stopdb2 /etc/rc0.d/K01rc.stopdb2
and on the /etc/rc.local, i need to add this only
touch /var/lock/subsys/stopdb2
Is that going to work?
thanks... (1 Reply)
When i finished installation the Redhat Enterprise Linux 6.2, and login to the system, I can't login although username: root and Password correct. I install on the Hp Blade Server. I don't know why.
How to fix this error? who can help me? :confused:
Thanks! (3 Replies)
Hi guys,
I really need your help with this.
My network interface eth0 is up but not running. I checked udev rules and ifcfg-eth0 files to make sure the mac address are the same.
It just would not come up. Please please I will really appreciate the help here.
Thank you in advance. (3 Replies)
Having an issue with clustat not displaying the rgmanager info eventhu all the of the cman started successfully. No fencing errors. all of the cluster.conf are the same on all serers ..etc. However when i run the clustat i only see this:
Cluster Status for RESTON-LSMS @ Mon Aug 31 15:13:16 2015... (4 Replies)
Discussion started by: mrn6430
4 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)