How do you setup 2 nic cards for squid Ubuntu server? Post: 302763087

9 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. High Performance Computing

veritas and nic cards

Hello I have 2 machines with 3 NIC cards. When I setup veritas, I receive this message: e1000g1 has an IP address configured on it. It could be a public NIC on ken. Are you sure you want to use e1000g1 for the first private heartbeat link? As if e1000g1 should not have an IP address....

4. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

5. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

6. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

7. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

8. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance!

9. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

LEARN ABOUT MINIX

resolvxc

RESOLV.CONF(5)							File Formats Manual						    RESOLV.CONF(5)

NAME

       resolv.conf - Domain Name System resolver configuration

SYNOPSIS

       /etc/resolv.conf

DESCRIPTION

       The  /etc/resolv.conf  is used to configure how the host will use the Domain Name System to resolve hostnames to IP addresses.  It may con-
       tain these two lines:

	      nameserver     IP-address
	      domain	     domain-name

       The nameserver entry tells the IP address of the host to use for DNS queries.  If it is set to 127.0.0.1 (which is the  default)  then  the
       local  name  daemon is used that may use the /etc/hosts database to translate host names.  You normally only need a nameserver entry if the
       name server is at the other side of a router.  The default nonamed name server can't look beyond the local network.

       The domain entry tells the default domain to use for unqualified hostnames.  This entry is usually not given in which case  the	domain	of
       the local host is used.

       The long version of this story can be found in resolver(5).

FILES

       /etc/resolv.conf    DNS resolver configuration file.

SEE ALSO

       resolver(5), hosts(5), nonamed(8), boot(8).

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																    RESOLV.CONF(5)