How do you setup 2 nic cards for squid Ubuntu server? Post: 302763017

9 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. High Performance Computing

veritas and nic cards

Hello I have 2 machines with 3 NIC cards. When I setup veritas, I receive this message: e1000g1 has an IP address configured on it. It could be a public NIC on ken. Are you sure you want to use e1000g1 for the first private heartbeat link? As if e1000g1 should not have an IP address....

4. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

5. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

6. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

7. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

8. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance!

9. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

LEARN ABOUT CENTOS

basic_radius_auth

basic_radius_auth(8)					      System Manager's Manual					      basic_radius_auth(8)

NAME

       basic_radius_auth - Squid RADIUS authentication helper

SYNOPSIS

       basic_radius_auth -f config file
       basic_radius_auth -h server name  port ] [-i identifier ] -w secret [-t timeout ]

DESCRIPTION

       basic_radius_auth allows Squid to connect to a RADIUS server to validate the user name and password of Basic HTTP authentication.

OPTIONS

       -f configfile
		   Specifies the path to a configuration file. See the CONFIGURATION section for details on the file content.

       -h server   Alternative method of specifying the server to connect to

       -p port	   Specify  another  server port where the RADIUS server listens for requests if different from the default RADIUS port.  Normally
		   not specified.

       -i identifier
		   Unique identifier identifying this Squid proxy to the RADIUS server.  If not specified the IP address is used to  identify  the
		   proxy.

       -w secret   Alternative	method of specifying the shared secret. Using the -f option with a configuration file is generally more secure and
		   recommended.

       -t timeout  RADIUS request timeout. Default is 10 seconds.

CONFIGURATION

       The configuration specifies how the helper connects to RADIUS.  The file contains a list of directives (one per line). Lines beginning with
       a # are ignored.

       server radiusserver
	      specifies the name or address of the RADIUS server to connect to.

       secret somesecretstring
	      specifies the shared RADIUS secret.

       identifier nameofserver
	      specifies what name the proxy should use to identify itself to the RADIUS server.  This directive is optional.

       port portnumber
	      Specifies the port number or service name where the helper should connect.

       timeout seconds
	      Specifies the RADIUS request timeout.

AUTHOR

       This program is written by Marc van Selm <selm@cistron.nl> Henrik Nordstrom <hno@squid-cache.org>

       With contributions from many others.

       This manual was written by Henrik Nordstrom <hno@squid-cache.org>

COPYRIGHT

       This program and documentation is copyright to the authors named above.

       Distributed under the GNU General Public License (GNU GPL) version 2 or later (GPLv2+).

QUESTIONS

       Questions on the usage of this program can be sent to the Squid Users mailing list <squid-users@squid-cache.org>

       Or contact your favorite RADIUS list/friend if the question is more related to RADIUS than Squid.

REPORTING BUGS

       Bug reports need to be made in English.	See http://wiki.squid-cache.org/SquidFaq/BugReporting for details of what you need to include with
       your bug report.

       Report bugs or bug fixes using http://bugs.squid-cache.org/

       Report serious security bugs to Squid Bugs <squid-bugs@squid-cache.org>

       Report ideas for new improvements to the Squid Developers mailing list <squid-dev@squid-cache.org>

SEE ALSO

       squid(8), GPL(7),
       RFC2058 - Remote Authentication Dial In User Service (RADIUS)
       The Squid FAQ wiki http://wiki.squid-cache.org/SquidFaq
       The Squid Configuration Manual http://www.squid-cache.org/Doc/config/

								   7 August 2004					      basic_radius_auth(8)