- checki it out, and if possible, give it a try...
BTW in order for grub to boot from some partition, it must be able to find a "boot sector" (or "boot record") already there.
(in your case, you should at least use `dd' to save your boot sector, and restore it along with your 'tar' stuff..
ok ?
HTH
good luck, and success !
alexandre botao
("comets never dodge")
I think u didnt understand me.
Let me clarify.
I do FULL backup of my Debian Lenny 5 server (machine A) using tar.
The restore of tar backup is Ok..its working great on the spare machine (machine B).
Now on the above running system (the spare machine) i want to create a directory
named "SystemBackup02":
Next time I want to
1. untar the contents of my backup in the "SystemBackup02"
directory.
2.change ip in /SystemBackup02/etc/network/interfaces & modify other confs
3.add an entry in grub, telling grub that it can also boot from this directory.
so the aim is to be able to boot from several versions of system backup
I have installed Linux 7.2 on a IBM xseries 235 server with 5 scsi hard drives and ServerRaid-5i Ultra320 scsi controller.
I started my installation by configuring the raid controller. I created 2 arrays, raid 1 and raid5. I then proceeded to install Linux and load the drivers.
After the... (2 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Please help. I am new to linux. I wrote a script to run the backup on lunix machine but the job gave me an error. I am using Linux 2.6.14.3. Below is the sample of my script can anyone tell me where went wrong? Thanks in advance.
#!/bin/sh
dat=$(date +%d%b%y)... (5 Replies)
hi,
Recently, I had receive one system. it's run on the unix tru64 server.
I looking some log files when i know don't work few months age system backup to tape.
Below error:
INFO:Tape backups to tape tape0 starting
for backup list:
slot2:/disk4
Backup Command Variable... (0 Replies)
I have unix server with OS 5.8 ,,,
I tried ufsdump 0ua -f /dev/rmt/0 / to perform full system backup on tape but I failed could any one give a procedure for full system backup on solaris machine using tapes??? (1 Reply)
I would like to know if I can do a full system back
up on my Unix Sco openserver 5.0.5 Machine. If so, What
is the syntax to do this or where can I find this
information at?
Also, is it possible to make this tape bootable so
that I can easily do a full system restore? Any
information on... (2 Replies)
Hello,
I'm still new in HP-UX backup and I want to do a FULL BACKUP of HP-UX server to TAPE device. After reading on several forums and posts, i have list down several steps on how to do a full backup on HP-UX with fbackup. I would like the gurus here to comment/advise on the steps below
1)... (4 Replies)
Hi,
In order to have a sand box machine that I could use to test some system changes before going to production state, I'd like to duplicate a working system to a virtual one. Ideally, I'd like to manage to do it this way :
- Make a full system backup excluding the user file system (this... (7 Replies)
Hello i am new on Solaris, and i need to migrate my old AIX 5.3 to Solaris 11.2
Now i have all apps working fine but i have the backup cause i was reading and i have not idea about what method must i choose.
Btw on AIX i had a mksysb backup to restore all system and obviously another backups to... (4 Replies)
Discussion started by: thorin666
4 Replies
LEARN ABOUT DEBIAN
bootcdbackup
BOOTCDBACKUP(1) bootcd utils BOOTCDBACKUP(1)NAME
bootcdbackup - create a bootable offline backup of a unix system
SYNOPSIS
bootcdbackup [-i] [-v] [-s] [-c <config directory>] [-url <url] [-nomount] [-2diskconf <file>] <dev> <name> <builddir>
DESCRIPTION
bootcdbackup creates a offline backup from a installed system. You need a running bootcd to boot the system with. This CD/DVD is booted on
the system and bootcdbackup creates a bootable CD/DVD with the bootcd kernel and the backup disk as tar-file.
To restore or clone the system, boot the CD/DVD image and install it with bootcd2disk -c <name> on the system.
bootcdbackup can try to discover the disk partition by searching for fstab on the given partition. A other way to backup the partition ta-
ble is the program bootcdmk2diskconf which creates a configuration file on a running system.
OPTIONS -i The bootcdbackup runs in interactive mode and you can run each function manually. This option is useful for debugging.
-v The option "-v" (verbose) adds messages on running.
-s This option can be used to disable interactive questions and to try to ignore errors.
-c <config directory>
The configuration directory which includes the file "bootcdbackup.conf", default is "/etc/bootcd".
-url <url>
If bootcdbackup is slow on your system (because of a slow CD/DVD drive or the HP ILO virtual CD interface), you can use an image server
to get the image from.
bootcdbackup use the SWAP partition of your upcoming system as temporary space and copy the image from the configured image server to
this partition and use it as image. The image server url is configured with this option.
-nomount
The target disk should not be mounted and no search for fstab is done.
--cpio
Normally as backup tool star will be used if selinux files have to be backed up and cpio will be used if not. With this option the
usage of cpio can be forced.
--star
Normally as backup tool star will be used if selinux files have to be backed up and cpio will be used if not. With this option the
usage of star can be forced.
-2diskconf <file>
The parameter configures a bootcd2disk.conf for the restore of the system done by bootcd2disk. The configuration file can be created
with the command bootcdmk2diskconf.
<dev>
Configures the device where bootcdbackup finds the file "fstab" and discover the configuration for the restore.
<name>
The name of the backup (no blanks!) is used on the creation time and to restore the backup with bootcd2disk -c <name>.
<builddir>
Builddir is an directory on the backup system where bootcdbackup build the backup CD/DVD. Space for the CD/DVD image, for compression
and the data is needed!
All other configuration has to be done in the config files.
FILES
/etc/bootcd/bootcdbackup.conf
Configuration for bootcdbackup.
SEE ALSO
Documentation in bootcdbackup.conf
bootcdbackup.conf(5), bootcd(1), bootcdflopcp(1), bootcdwrite(1)AUTHOR
This manual page was written by Bernd Schumacher <bernd.schumacher@hp.com> and Carsten Dinkelmann <Carsten.Dinkelmann@foobar-cpa.de> for
the Debian GNU/Linux system (but may be used by others).
bootcdbackup 2007-07-05 BOOTCDBACKUP(1)