lotsfree_pct(5) 						File Formats Manual						   lotsfree_pct(5)

NAME

       lotsfree_pct - sets the upper bound before paging daemon starts stealing pages, specified as a percentage of available physical memory

VALUES

   Default
   Allowed values
       Must not be less than (see desfree_pct(5)).

DESCRIPTION

       is  a tunable parameter to set the upper bound before the paging daemon starts stealing pages.  It is specified as a percentage of physical
       memory available after boot.

       must be a positive integer between 0 and 30 and must be equal to or greater than is the lower bound before paging  daemon  starts  stealing
       pages (see desfree_pct(5)).

       The  paging  daemon  in	HP-UX  acts on a "two hand" model.  The daemon runs at least once a second, with one part marking pages of virtual
       address space as "unused".  If the page is referenced before this "aging" hand returns, it will be marked as "used" again.  Another section
       of  the	daemon, the "steal" hand follows the age hand (the distance between them varies in a well bounded range) and processes pages which
       are still marked unused, since needed or frequently accessed pages would have a high likelihood of being referenced in the gap between  the
       hands.

       Exactly	how the steal hand treats the pages still marked as unused depends on the comparison of free system physical memory and three pag-
       ing parameters: and Between and is a periodically re-calculated and, hence, floating threshold known as Thus and are the  upper	and  lower
       bounds between which moves.

       is an expression how much the system maintains, in percentage terms (percentage of physical memory available after boot).

       o  If is greater than the system's memory availability is in good shape.  The steal hand does nothing as a lot of memory is still available
	  on the system, so there is no need to "steal" a page that might be needed soon.

       o  In the more common case, when is lower than (but higher than the steal hand will begin to steal pages that  have  remained  unreferenced
	  from when the age hand last marked them.  "Stealing" a page refers to the process of freeing the page from being allocated for a partic-
	  ular virtual page and making it available for general allocation again.  If falls below but still is more than  memory  availability	is
	  still  in reasonable shape, but the paging daemon begins stealing pages more aggressively, including putting lower-priority processes to
	  sleep to free up their memory.

       o  When is less than memory availability is getting more critical; and the paging daemon begins	deactivating  low-priority  processes,	in
	  other words, swapping out pages to the swap device.

       Since  the  exact  memory  topography  varies widely across supported platforms, these three boundary values are tunable to allow for cases
       where the default values are insufficient, or where the system administrator requires more control over the actions of the  paging  daemon.
       In general, however, the automatic calculation performed by default should suffice for most systems.  is a system calculated value.

   Who Is Expected to Change This Tunable?
       Anyone with super-user privileges.

   Restrictions on Changing
       Changes to this tunable take effect immediately.

   When Should the Value of This Tunable Be Raised?
       The tunable should only be raised if an administrator feels that the current value provides insufficient free physical memory required by a
       short lived but critical process.  Increasing (and hence to an amout equal to or greater than the amount of  physical  memory  required	by
       this  process  allows the swapper to move out less frequently used pages from longer running programs, increasing the probability of having
       the desired amount of memory on hand without waiting for to drop below or during the execution of this critical process.

       Unless the current is set very low, raising for a process that is not short lived is fairly pointless as will almost certainly  drop  below
       and  more  likely even below thus waking up the swapper and allowing for the physical memory to be freed up over the longer running time as
       the process requires it.

   What are the Side Effects of Raising the Value?
       The swap daemon will begin to steal less-frequently accessed pages from running processes.  If large amounts of physical memory is  already
       available  without  the above situation, this will only slow the already running processes if they need to swap back in their stolen pages.
       Large amounts of free physical memory without short-lived processes that need it (as mentioned above) is simply a waste.

   When Should the Value of This Tunable Be Lowered?
       The tunable should be lowered on systems where swapping is occurring that still have more physical memory available than is needed on aver-
       age, and that have no sudden sharp peaks in memory usage.

   What are the Side Effects of Lowering the Value?
       System  swap  will occur at a lower memory level.  If is set too low (keeping in mind that can never be greater than the system might stall
       due to memory starvation upon new allocation even though swap space is available.  The stall would not be fatal, as  the  swap  daemon  run
       eventually, but will certainly hamper performance.

   What Other Tunable Values Should Be Changed at the Same Time?
       should be considered when modifying since Attempting to set above is meaningless and will result in an error.

   Notes
       Starting with HP-UX 11iv2, HP recommends the use of to specify the upper bound for the paging daemon.

ERROR VALUES

       Memory resource management infrastructure is busy.
		      Please try later.

       Attempting to set
		      above

       An invalid value is entered that is not an integer between
		      0 and 30, such as an negative number.

WARNINGS

       All  HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases of
       HP-UX.

       Installation of optional kernel software, from HP or other vendors, may cause changes to tunable  parameter  values.   After  installation,
       some  tunable  parameters may no longer be at the default or recommended values.  For information about the effects of installation on tun-
       able values, consult the documentation for the kernel software being installed.	For information about optional kernel  software  that  was
       factory installed on your system, see at

AUTHOR

       was developed by HP.

SEE ALSO

       desfree_pct(5).

							     Tunable Kernel Parameters						   lotsfree_pct(5)