It's about Solaris10. I didn't use RBAC in s11 but as I can see there is no built-in Primary Administrator profile. I think that you can create profile approprite for your needs for example just with zfs command.
There is profile related to filesystem management.
You can try if they can meet your needs.
I have tested and it looks ok for creating zfs filesystem.
Another edit
ZFS File System Management works fine for zfs command but for zpool command you should use different profile:
And then zpool scrub works fine too
Hi all
I plan to install Solaris 10U6 on some SPARC server using ZFS as root pool, whereas I would like to keep the current setup done by VxVM:
- 2 internal disks: c0t0d0 and c0t1d0
- bootable root-volume (mirrored, both disks)
- 1 non-mirrored swap slice
- 1 non-mirrored slices for Live... (1 Reply)
I created a pool the other day. I created a 10 gig files just for a test, then deleted it.
I proceeded to create a few files systems. But for some reason the pool shows 10% full, but the files systems are both at 1%? Both files systems share the same pool.
When I ls -al the pool I just... (6 Replies)
I need to migrate an existing raidz pool to a new raidz pool with larger disks. I need the mount points and attributes to migrate as well. What is the best procedure to accomplish this. The current pool is 6x36GB disks 202GB capacity and I am migrating to 5x 72GB disks 340GB capacity. (2 Replies)
Other than export/import, is there a cleaner way to rename a pool without unmounting de FS?
Something like, say "zpool rename a b"?
Thanks. (2 Replies)
installed Solaris 11 Express on my server machine a while ago. I created a Z2 RAID over five HDDs and created a few ZFS filesystems on it.
Once I (unintentionally) managed to fill the pool completely with data and (to my surprise) the filesystems stopped working - I could not read/delete any... (3 Replies)
I messed up my pool by doing zfs send...recive So I got the following :
zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
rpool 928G 17.3G 911G 1% 1.00x ONLINE -
tank1 928G 35.8G 892G 3% 1.00x ONLINE -
So I have "tank1" pool.
zfs get all... (8 Replies)
I have a branded zone txdjintra that utilizes a pool named Pool_djintra that is no longer required. There is a 150 Gig Lun assigned to the pool that I need to reassign to another branded zone txpsrsrv07 with a pool named Pool_txpsrsrv07 on the same sun blade. What is the process to do this?
... (0 Replies)
I accidently added a disk in different zpool instead of pool, where I want.
root@prtdrd21:/# zpool status cvfdb2_app_pool
pool: cvfdb2_app_pool
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
cvfdb2_app_pool ONLINE 0 0 0... (1 Reply)
I have installed FreeBSD onto a raw image file using QEMU Emulator successfully. I have formatted the image file using the ZFS file system (ZFS POOL).
Using the following commands below I have successfully mounted the image file ready to be opened by zpool
sudo losetup /dev/loop0 .img sudo... (1 Reply)
Discussion started by: alphatron150
1 Replies
LEARN ABOUT FREEBSD
gptzfsboot
GPTZFSBOOT(8) BSD System Manager's Manual GPTZFSBOOT(8)NAME
gptzfsboot -- GPT bootcode for ZFS on BIOS-based computers
DESCRIPTION
gptzfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool. gptzfsboot is installed in a freebsd-boot partition of a
GPT-partitioned disk with gpart(8).
IMPLEMENTATION NOTES
The GPT standard allows a variable number of partitions, but gptzfsboot only boots from tables with 128 partitions or less.
BOOTING
gptzfsboot tries to find all ZFS pools that are composed of BIOS-visible hard disks or partitions on them. gptzfsboot looks for ZFS device
labels on all visible disks and in discovered supported partitions for all supported partition scheme types. The search starts with the disk
from which gptzfsboot itself was loaded. Other disks are probed in BIOS defined order. After a disk is probed and gptzfsboot determines
that the whole disk is not a ZFS pool member, the individual partitions are probed in their partition table order. Currently GPT and MBR
partition schemes are supported. With the GPT scheme, only partitions of type freebsd-zfs are probed. The first pool seen during probing is
used as a default boot pool.
The filesystem specified by the bootfs property of the pool is used as a default boot filesystem. If the bootfs property is not set, then
the root filesystem of the pool is used as the default. zfsloader(8) is loaded from the boot filesystem. If /boot.config or /boot/config is
present in the boot filesystem, boot options are read from it in the same way as boot(8).
The ZFS GUIDs of the first successfully probed device and the first detected pool are made available to zfsloader(8) in the
vfs.zfs.boot.primary_vdev and vfs.zfs.boot.primary_pool variables.
USAGE
Normally gptzfsboot will boot in fully automatic mode. However, like boot(8), it is possible to interrupt the automatic boot process and
interact with gptzfsboot through a prompt. gptzfsboot accepts all the options that boot(8) supports.
The filesystem specification and the path to zfsloader(8) are different from boot(8). The format is
[zfs:pool/filesystem:][/path/to/loader]
Both the filesystem and the path can be specified. If only a path is specified, then the default filesystem is used. If only a pool and
filesystem are specified, then /boot/zfsloader is used as a path.
Additionally, the status command can be used to query information about discovered pools. The output format is similar to that of zpool
status (see zpool(8)).
The configured or automatically determined ZFS boot filesystem is stored in the zfsloader(8) loaddev variable, and also set as the initial
value of the currdev variable.
FILES
/boot/gptzfsboot boot code binary
/boot.config parameters for the boot block (optional)
/boot/config alternative parameters for the boot block (optional)
EXAMPLES
gptzfsboot is typically installed in combination with a ``protective MBR'' (see gpart(8)). To install gptzfsboot on the ada0 drive:
gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ada0
gptzfsboot can also be installed without the PMBR:
gpart bootcode -p /boot/gptzfsboot -i 1 ada0
SEE ALSO boot.config(5), boot(8), gpart(8), loader(8), zfsloader(8), zpool(8)HISTORY
gptzfsboot appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BUGS
gptzfsboot looks for ZFS meta-data only in MBR partitions (known on FreeBSD as slices). It does not look into BSD disklabel(8) partitions
that are traditionally called partitions. If a disklabel partition happens to be placed so that ZFS meta-data can be found at the fixed off-
sets relative to a slice, then gptzfsboot will recognize the partition as a part of a ZFS pool, but this is not guaranteed to happen.
BSD September 15, 2014 BSD