OI 151 e1000g NIC problem Post: 302753429

Sponsored Content

Operating Systems Solaris OI 151 e1000g NIC problem Post 302753429 by hicksd8 on Tuesday 8th of January 2013 03:52:13 PM

01-08-2013

Moderator

Well all this seems very familiar to me. I used to own a group of IT companies and one of them was a storage distributor. We saw large transfers throttling back (to almost nothing) quite regularly and it caused all sorts of support calls to our storage help desk.

My advice is to look at Windoze as the culprit. You've searched Google so you probably already know that there have been raging arguments and bust-ups over this, for example:

Are You Seeing Slow Windows 7 Network Performance?

Unfortunately I can't just prescribe a cure; I can only sympathise. You are not alone!!!!

What Windoze version are you using exactly? Even using a different (older) version may not fix it!!!!!! Good old MS!

Try using a different protocol to test your transfer speeds eg. FTP between Windows and OI. Also see the performance difference if one node or the other initiates the transfer.

Sorry to be so vague but I reckon you can forget about OI being the problem.

Hope that helps.

This User Gave Thanks to hicksd8 For This Post:

hicksd8

View Public Profile for hicksd8

Find all posts by hicksd8

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SuSE 8.1 NIC problem

i have just installed suse 8.1 on a third computer which has an Asus p4s8x with onboard NIC and sound. now, on install suse detected everything automatically with no probelm, however upon reboot the sound failed to load as well as the network card. /dev/eth* doesnt exist. i looked in the bios and...

2. Solaris

Dual NIC problem

Hi, I have a problem with a server disconnecting from the network. This is a SUN box with dual NIC's running Solaris 8. We have a Nokia router that routes traffic but it's virtual address doesn't respond to pings. When the SUN box sends out a ping, if nothing comes back it will shut down...

3. UNIX for Dummies Questions & Answers

nic problem

hello friends i am using x86 pc i can install solaris o/s but nic card is not deceting. i am not able see in file called /etc/path_to_inst. i did /touch reconfigu and devfsadm also. i used external nic card also realtech 8169d am using gigabyte mother board 775.

4. IP Networking

Problem configuring NIC in DGUX

Old DG box Aviion PentiumPro running R4.20Mu06 being used to try to recreate Ingres db from backup tapes so machine has not been operational before and some of original files in /etc may have ben overwritten Unable to get NIC working Any pointers on how to go about configuring NIC :rolleyes:

5. Solaris

IPMP. Is this a NIC problem!!?

-- IPMP Groups -- Node Name Group Status Adapter Status --------- ----- ------ ------- ------ IPMP Group: hostname1.xx-xxxx.xxxi sc_ipmp1 Online ce5 Online IPMP Group: hostname1.xx-xxxx.xxxi ipmpgrp01...

6. Solaris

NIC problem

can anyone help me fix this? what command should I use to bring them back to "TRUE"? Interface Speed Duplex Autoneg --------- ----- ------ ------- ce0 100 Mbit/s FULL FALSE ce5 100 Mbit/s FULL ...

7. Solaris

NIC detection problem in solaris

Hi, Hardware: Mother board: Asus P5G4IC-M LX On board NIC: PCIe Gigabite LAN Kernel Ver.: SunOS 5.10 Generic_141445-09 I've NIC detection problem in Solaris 10. When I was trying to install in x86 machine, it was not asking for any Network settings which means it couldn't find NIC. But...

8. Solaris

e1000g.conf

Hi guys Beginning to get my hands dirty in the world of Solaris11. I've encountered a bump that I cannot seem to overcome with a server NIC interface? So I installed a VM Solaris11 machine at home to play with. Sun OS Solaris11 5.11 11.0 i86pc i386 My question is - is it enough to modify...

9. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome....

10. AIX

LPAR NIC Problem

On all our lpars we have our main interface set up and a backup network interface. On a number of our lpars those connections go to a down state for no apparent reason. They are still attached but they show up as "*en1" in netstat. Has anyone else come across this issue or know why an...

LEARN ABOUT MOJAVE

curlopt_proxy_transfer_mode

CURLOPT_PROXY_TRANSFER_MODE(3)				     curl_easy_setopt options				    CURLOPT_PROXY_TRANSFER_MODE(3)

NAME

       CURLOPT_PROXY_TRANSFER_MODE - append FTP transfer mode to URL for proxy

SYNOPSIS

       #include <curl/curl.h>

       CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_TRANSFER_MODE, long enabled);

DESCRIPTION

       Pass  a long. If the value is set to 1 (one), it tells libcurl to set the transfer mode (binary or ASCII) for FTP transfers done via a HTTP
       proxy, by appending ;type=a or ;type=i to the URL. Without this setting, or it being set to 0 (zero, the default),  CURLOPT_TRANSFERTEXT(3)
       has no effect when doing FTP via a proxy. Beware that not all proxies support this feature.

DEFAULT

       0, disabled

PROTOCOLS

       FTP over proxy

EXAMPLE

       TODO

AVAILABILITY

       Added in 7.18.0

RETURN VALUE

       Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if the enabled value is not supported.

SEE ALSO

       CURLOPT_PROXY(3), CURLOPT_HTTPPROXYTUNNEL(3),

libcurl 7.54.0							 February 03, 2016				    CURLOPT_PROXY_TRANSFER_MODE(3)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SuSE 8.1 NIC problem

Discussion started by: norsk hedensk

2. Solaris

Dual NIC problem

Discussion started by: m_smith

3. UNIX for Dummies Questions & Answers

nic problem

Discussion started by: manoj123

4. IP Networking

Problem configuring NIC in DGUX

Discussion started by: lindab