Sponsored Content
Operating Systems AIX IBM's pSeries 570 vs a 520 vs 550 Post 302753039 by Devyn on Tuesday 8th of January 2013 02:10:53 AM
Old 01-08-2013
Thanks all! Really appreciate it! This does help! Yup I would be looking for a single CEC of a 570 if at all or if I can get the same functionality for less $ with a 520 or 550 then would prefer those. (However, at this time the single CEC's of 570's come priced cheaper and so teh original question...) For PowerVM looks like I'll need at least the Standard VET to create VIO's (I recall reading the Enterprise VET will allow for LPM but I don't need that in the foreseeable future). With the Standard I can create two VIO's which is something I would want to do. Most of the hardware out there that I see comes with a POD and a VET for those listed as APV.

> Secondly, if you are running virtualisation, are you happy to run a single VIO with IVM or do you also need to factor in an HMC. With the 570 you must use an HMC! The IVM isn't an option.
I'd be looking to get an HMC shortly after if not together. I'm thinking then even for a single CEC of a 570 I'd still need the HMC?

> If you have an HMC and a server and want to run dual VIO Servers then you need a split backplane in you server, with disks attached to both backplanes.
Yes, if I have a Standard VET then would want to run two VIO's. Thanks very much for that! When you say I need disks attached to both backplanes I'm thinking 2 disks per backplane then (4 total)? (Not sure if I'm making sense.)

Read somewhere that an MOD (CUoD Memory Activation Code) might not make much sense on the 520's and 550's but I'm not 100% sure here on this. If I don't have the MOD on any of the three types, 520, 550, 570, what features would I be missing? I'm thinking I'll need all three codes but I'm not 100% sure if paying for an MOD would make any significant difference in functionality.

> 200-240 volt AC
This would be a problem. I'll have to do a bit more digging on exactly what I would need to check if my HH would allow for this.

Up to a 4-way machine would be fine so any 3 of those would do. Please let me know on the above and thanks very much again!

Thanks, DH
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Help with IBM 550 and HMC settings

I'm a Solaris and Debian/SuSE weenie, and I need some help setting the IP address of the remote web interface on an IBM 550 I plugged the port labled HMC1 to the network. The "network" is really a small linksys router that I use to test internet configs, as I can change the settings at will... (0 Replies)
Discussion started by: System Shock
0 Replies

2. AIX

new IBM pseries and new disks

Hello Gurus, i'm quite new person in AIX world, actually i'm SAP consultant. But due to my job faced with AIX. Trying to configure new server for installation SAP. We have 4 disks one of them (hdisk3) has VG rootvg. How i can extend rootvg with another disk? i tried: # extendvg rootvg hdisk0... (2 Replies)
Discussion started by: sapbcer
2 Replies

3. Linux

Why does they use Linux on IBM pSeries

Anyone can help me answer the question. Why does they use Linux on IBM pSeries not AIX. I can't understand why, cause AIX is the best supporting from IBM pSeries. Tks you. (3 Replies)
Discussion started by: quan0509
3 Replies

4. AIX

p6 570 network for AIX LPAR

know how to do it. (3 Replies)
Discussion started by: rainbow_bean
3 Replies

5. AIX

IBM pSeries Power5 9111-285 1,9 GHz

Hi , I am planing to buy IBM pSeries Power5 9111-285 1,9 GHz but I am confused with few things. I would be happy if you could clear it up for me ? 1.Do I have to buy some license in order to create Lpars ? 2.Do I have to buy some license in order to use HMC , micro - partiocioning , VIOS... (4 Replies)
Discussion started by: phobus
4 Replies

6. Hardware

VT 520 Terminal

Back of a VT 520 Teminal has a 1"X1" (approx.) rectangular area covered by a removable plastic flap. It is just above the keyboard hole(mini 6 pin DIN). What is it? Thank you. ---------- Post updated at 02:49 PM ---------- Previous update was at 11:37 AM ---------- I've got the answer.... (0 Replies)
Discussion started by: vectrum
0 Replies

7. AIX

IBM Power Pseries Open Firmware boot / VIOS POWERVM VET CODE

Hello, I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization. So when booted , it goes into OPEN Firmware I/O Hosting requires a hosting partition boot not permitted exit called > ok Panel shows > IO... (3 Replies)
Discussion started by: filosophizer
3 Replies

8. AIX

IBM QSECOFR password missing P/N 9405-520

How to remove or reset password QSECOFR from IBM iSeries AS/400 P/N 9405-520. Regards (2 Replies)
Discussion started by: mtbax7
2 Replies

9. AIX

IBM AIX console pseries

Hi, when I boot I get an E1DC error code. I've looked it up and it says that this error occurs during the firmware check. But the error is called "Dynamic Console Selection" . 1- Machine stopped at LCD led display = E1DC = CA00E1DC E1DC Dynamic console selection. (maybe cable or keyboard)... (3 Replies)
Discussion started by: filosophizer
3 Replies
TOMATOES(6)															       TOMATOES(6)

NAME
tomatoes - Tomatoes smashing game SYNOPSIS
tomatoes SYNOPSIS
I Have No Tomatoes is an extreme leisure time activity idea of which culminates in the following question: How many tomatoes can you smash in ten short minutes? If you have the time to spare, this game has the vegetables just waiting to be eliminated! NOTES
Before starting the game, you should know that the game uses OpenGL for hardware accelerated 2d & 3d graphics. This means that you must have fully OpenGL compatible graphics card in your PC. Your card also needs to be able to use 512x512 textures, and this rules out Voodoo 1, 2 and 3 (limited to 256x256 textures). As for the CPU and memory requirements, I'd recommend something along the lines of Pentium II (or an AMD equivalent) and 64MB. The game works on much slower systems as well, as the game skips frames if the system can't keep up with the 60 FPS rate; this ensures that the game runs at the right speed, you just don't get very smooth animation. This game features solid game play with beautiful OpenGL API driven isometric 3d graphics and nice music. It also includes a MOD player, and you can use your own MOD-type music in the game background. Just copy your XM/S3M/IT/MOD - files to the music subdirectory of I Have No Tomatoes and the game plays them. You can press F1 to skip a song when ingame. There's room for 128 MODs. Btw, if you don't have any MOD music, ModArchive (www.modarchive.com <URL:www.modarchive.com>) is a good place to download some. CONFIGURATION
You may also want to set some options, such as the screen resolution and color depth. By default, I Have No Tomatoes starts fullscreen in 800x600 resolution, 32bpp. To fine-tune the preferences to suit your PC better, open the file config.cfg in a text editor (Notepad will do). Under Unix this file is stored in ~/.tomatoes/. Most likely you'll be interested in these lines: o video_mode = 800 x 600 o video_mode_color_depth = 32 o video_mode_fullscreen = 1 o sound_enabled = 1 To set the resolution, change the video_mode - line (some common resolutions include 640 x 480, 800 x 600, 1024 x 768). Most common color depths are 16 and 32, and sometimes 24. video_mode_fullscreen controls whether the game starts in fullscreen or in a window. When running in windowed mode, you can use any resolution you want (the 4:3 aspect ratio modes are still preferred). If you don't have a sound card (or want to turn the sounds off), set sound_enabled to 0 (zero). Finally, if you want to know how many frames your system draws per second (FPS), set show_fps to 1. FPS should be over 60 for smooth anima- tion. The default keys can be changed from the Options menu in game, so no need change them here. When you're satisfied with the config.cfg settings, by all means, proceed to start the game :) AUTHOR
You can contact the author by email at <lsoft@mbnet.fi>. Notice that since 12th of July, 2004 I've been in the army, so don't expect imme- diate responses. Be patient :) This man page was compiled by Helge Kreutzmann <debian@helgefjell.de> for the GNU/Linux project but it may be used by everybody else as well. SEE ALSO
Tomates homepage: http://tomatoes.sourceforge.net <URL:http://tomatoes.sourceforge.net> tomatoes 23 May 2012 TOMATOES(6)
All times are GMT -4. The time now is 09:24 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy