01-04-2013
As for the DNS question:
The bind manual lists this:
Quote:
listen-on
-> listen-on [ port ip_port ] { address_match_list };
listen-on defines the port and IP address(es) on which BIND will listen for incoming queries. The default is port 53 on all server interfaces. Multiple listen-on statements are allowed. This statement may only be used in a global options clause.
I'd imagine that you would add this to your named.conf file and restart.
10 More Discussions You Might Find Interesting
1. Solaris
Hi experts,
In my solaris system when i run the command df -h i got the below response.I have some confusion which i want to share with you guys.1)there are two SWAP file system shows are they same or different?2)if i want to count the total disk space should i take both the swap space or only... (2 Replies)
Discussion started by: rafiassam
2 Replies
2. Programming
Hi all,
i just started started learning system programming and want to pursue a career in the sys prog area.
below is the program that use a fork() call.
i read in one of the tutorials that parent process and child process uses different address spaces and runs concurrently.
that meas each... (2 Replies)
Discussion started by: MrUser
2 Replies
3. UNIX for Dummies Questions & Answers
Hi
I have checked the output of top command in which there is a difference shown between the swap of top command for a process with total swap memory usage of the top command.
Swap usage of process is higher than the total swap memory usage.
top - 18:28:21 up 7:13, 5 users, load... (2 Replies)
Discussion started by: gagan2914
2 Replies
4. Linux
Hi,
i have done a blunder here, i increased the swap space on Xen5.6 server machine using below steps :-
1056 dd if=/dev/zero of=/root/myswapfile bs=1M count=1024
1057 ls -l /root/myswapfile
1058 chmod 600 /root/myswapfile
1059 mkswap /root/myswapfile
1060 swapon /root/myswapfile
... (1 Reply)
Discussion started by: apm
1 Replies
5. Red Hat
Hi Everyone,
I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out... (2 Replies)
Discussion started by: bobby320
2 Replies
6. Solaris
Hi folks,
How can I scan newly attached network interfaces to server without reboot?
Is there any command or something to scan without reboot.
Thanks (5 Replies)
Discussion started by: snchaudhari2
5 Replies
7. SuSE
Hi,
I'm trying to migrate the content of disk 'A' to disk 'B', that they belong to the same vg 'data'_vg'. Whe using pvmove, I get the following error: 'device-mapper: suspend ioctl failed: Interrupted system call'. I put down the whole trace:
pvmove -v "source_disk" "sink_disk"
... (0 Replies)
Discussion started by: Begnux
0 Replies
8. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
9. Solaris
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Discussion started by: kpatel786
7 Replies
10. Emergency UNIX and Linux Support
Oflate we are finding a few servers experiencing severe slowness. What would be the commands that I need to try to postmortem the situation? (3 Replies)
Discussion started by: ggayathri
3 Replies
vxpfto(1M) vxpfto(1M)
NAME
vxpfto - set Powerfail Timeout (pfto)
SYNOPSIS
vxpfto -g diskgroup -t timeout
vxpfto [-g diskgroup] -t timeout volume_list
vxpfto [-g diskgroup] -o pftostate={enabled|disabled}
vxpfto [-g diskgroup] -o pftostate={enabled|disabled} volume_list
DESCRIPTION
Powerfail Timeout is an attribute of a SCSI disk connected to an HP-UX host (see the pfto(7) man page). The vxpfto command sets the Power-
fail Timeout interval on a set of Volume Manager disks, either all disks in a disk group, or all disks underlying the volumes listed.
The first form of the command sets the same PFTO value for all the disks in the specified VxVM diskgroup.
In the second form, all disks underlying the given list of volumes are selected, optionally restricted by the disk group specified with the
-g option. If you specify a diskgroup, any volume in the list not belonging to the diskgroup is ignored.
Use the -o pftostate option to disable or enable PFTO. By default, PFTO is enabled. You can enable PFTO either on all disks in a disk
group, or on all disks underlying the volumes listed.
If you invoke vxpfto without arguments, it displays a usage message.
OPTIONS
-g diskgroup
Specifies the disk group for the operation, either by disk group ID or by disk group name.
-o pftostate={enabled|disabled}
Enables or disables the use of PFTO for IO.
-t timeout
Specifies the PFTO value in seconds. The value must be zero or a positive integer. Zero represents the system default PFTO
value. The default value depends on the disk driver controlling the disk device.
volume_list
A list of VxVM volume names. List items must be separated by white-space.
EXIT CODES
vxpfto returns a zero if successful. If it encounters an error, vxpfto exits and displays a message on standard error. Defined exit codes
are:
0 Success.
1 No PFTO value specified.
2 No diskgroup or volume list specified.
3 Illegal PFTO value specified.
EXAMPLES
Set the PFTO value on all disks in disk group testdg to 100 seconds:
vxpfto -t 100 -g testdg
Set the PFTO value to 50 seconds on all disks underlying volume01 and volume02 in disk group testdg:
vxpfto -t 50 -g testdg volume01 volume02
Set the PFTO value to 300 seconds on all disks underlying volume01 and volume02, even though they are not in the same disk group:
vxpfto -t 300 volume01 volume02
Disable PFTO on all disks in disk group testdg:
vxpfto -g testdg -o pftostate=disabled
Enable PFTO on all disks underlying volume01 and volume02i in disk group testdg:
vxpfto -g testdg -o pftostate=enabled volume01 volume02
SEE ALSO
vxdisk(1M), pfto(7)
VxVM 5.0.31.1 24 Mar 2008 vxpfto(1M)