Sponsored Content
Special Forums Hardware 320GB HD change and recognize as 2TB Problem Post 302749943 by jao_madn on Sunday 30th of December 2012 06:16:12 AM
Old 12-30-2012
320GB HD change and recognize as 2TB Problem

Hi,

I would like to ask if someone experince this problem on a Hard disc. I had a 320 GB WD Blue 3.5 Hard disc. When i plug on my PC BIOS detect it for a while and dis-appear. Luckily sometimes i can check it on a bootable CD or attach on other LINUX PC but for a while it will dis-appear. As if you try to access the HD it will disappear from OS system even in BIOS. This is the results when i check the HD on linux using Fdisk. To my surprise the 320GB detected as 2TB.. HOW come it become to 2TB.

Quote:
Code:
Disk /dev/sdc: 2199.0 GB, 2199023255552 bytes
255 heads, 63 sectors/track, 267349 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

# fdisk /dev/sdc
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x92c910e4.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: The size of this disk is 2.2 TB (2199023255552 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT)


Disk /dev/sdc: 2199.0 GB, 2199023255552 bytes
255 heads, 63 sectors/track, 267349 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0993f2aa

the Disk Identifier change when i force to format it with fdisk option.. It means the disc is still accessible or something im missing..i already tried gparted or any tools related to HD or Filesystem (UBCD). But no success.

Maybe someone can give some ensights or opinion or any things that will help recover my HD or should i throw it on the garbage.

Last edited by DukeNuke2; 12-30-2012 at 07:49 AM..
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

change format problem

Someone can help for the following fromat change can done by script? i.e. insert the perivous colurm's first variable if below line don't have the varaible start from AXXX.... From A123,B123,C123 B123,C123 A234,B234,C234 A345,B345,C345 B345,C34 B345,C345 B345,C345 A456,B456,C456 ... (2 Replies)
Discussion started by: bleach8578
2 Replies

2. Debian

Change resolution problem

Hi gurus I have notebook with connected external monitor. output of my xrandr looks like Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 2960 x 1050 VGA connected 1680x1050+1280+0 (normal left inverted right x axis y axis) 478mm x 300mm 1680x1050 60.0*+ 1280x1024 ... (2 Replies)
Discussion started by: wakatana
2 Replies

3. UNIX for Dummies Questions & Answers

Problem to recognize a storage A5100

People i have solaris 9 in a sparc platform i`m tryng to conect a stora edge a5100.When i do a format i don't see the disk, later i do a touch /reconfigure reboot and nothing cant anybody help me? thank you (4 Replies)
Discussion started by: enkei17
4 Replies

4. Red Hat

RHEL4 easyRAID problem 2tb gpt xfs

hello community, i have problems with my redhat enterprise linux 4 nanhant 6 and my easyraid x8s (8x1tb) extern fibre channel raid extern raid configuration: raid level 5 (8x1tb) redhat system shows me four 2tb partitions and one 450gb partition from my raid :( why????? i have... (1 Reply)
Discussion started by: onkeldave
1 Replies

5. Solaris

Solaris recognize HW Raid ??

Hardware: HP P2000 HP DL380 G7 with Solaris Software: Solaris 10 05/08 I had made a Hardware raid on P2000 and install solaris on G7, The raid card controller is working fine. How can I make the raid works on OS?? "raidclt" is getting nothing :wall::wall: Thanks (11 Replies)
Discussion started by: stanley1024
11 Replies

6. SuSE

change PATH problem

Hi, I want to add a path to PATH. I added export PATH=$PATH:$HOME/newpath in the ~.profile. I exit the shell and reenter shell. After I type echo $PATH. The new path is not added. I don't know why. Can someone give advice? Thanks! (3 Replies)
Discussion started by: jianma
3 Replies

7. Shell Programming and Scripting

How to recognize the Shell?

Hello All I am working on Red Hat Enterprise Linux Server release 5.1 when I logged on to the shell and then write echo $SHELL it shows me the result /bin/bash and when I write csh, the prompt changes and I feel that I am now working upon C shell but when I do echo $SHELL it shows me the... (9 Replies)
Discussion started by: adisky123
9 Replies

8. Shell Programming and Scripting

Problem to automate the change password

Hi. I know how to get new password from input file which have till Dec 2014 passwords with today's date, i want to change my password everyday for which i know how to set cron job that will run everyday in morning. once it is changed it should e-mail me if it successful or not. Can someone... (0 Replies)
Discussion started by: rajjev_saini123
0 Replies

9. HP-UX

Problem in Change Password for user

Dears, I have a problem When I tried to change password for user in HP unix it gives me this error any one can help to solve this ? bmcaddm@nmssrv05: /home/bmcaddm # passwd Changing password for bmcaddm Old password: New password: Re-enter new password: vxfs: msgcnt 810034 mesg 001: V-2-1:... (8 Replies)
Discussion started by: ahmednoaman
8 Replies

10. IP Networking

DNS problem : ping doesn't recognize hostname

I have vmware on my windows PC ( hostname : acer ). vmware has RHEL 7 ( hostname : rhel7 ) installed recently. RHEL IP configuration IP : 192.168.5.128 Netmask : 255.255.255.0 ssh to rhel7 works from acer using putty resolve.conf cat /etc/resolv.conf nameserver 192.168.5.1 host... (12 Replies)
Discussion started by: hiten.r.chauhan
12 Replies
APT-CDROM(8)								APT							      APT-CDROM(8)

NAME
apt-cdrom - APT CD-ROM management utility SYNOPSIS
apt-cdrom [-rmfan] [-d=cdrom_mount_point] [-o=config_string] [-c=config_file] {add | ident | {-v | --version} | {-h | --help}} DESCRIPTION
apt-cdrom is used to add a new CD-ROM to APT's list of available sources. apt-cdrom takes care of determining the structure of the disc as well as correcting for several possible mis-burns and verifying the index files. It is necessary to use apt-cdrom to add CDs to the APT system; it cannot be done by hand. Furthermore each disc in a multi-CD set must be inserted and scanned separately to account for possible mis-burns. Unless the -h, or --help option is given, one of the commands below must be present. add add is used to add a new disc to the source list. It will unmount the CD-ROM device, prompt for a disc to be inserted and then proceed to scan it and copy the index files. If the disc does not have a proper .disk directory you will be prompted for a descriptive title. APT uses a CD-ROM ID to track which disc is currently in the drive and maintains a database of these IDs in /var/lib/apt/cdroms.list ident A debugging tool to report the identity of the current disc as well as the stored file name OPTIONS
All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean options you can override the config file by using something like -f-,--no-f, -f=no or several other variations. --no-auto-detect, --cdrom Do not try to auto-detect the CD-ROM path. Usually combined with the --cdrom option. Configuration Item: Acquire::cdrom::AutoDetect. -d, --cdrom Mount point; specify the location to mount the CD-ROM. This mount point must be listed in /etc/fstab and properly configured. Configuration Item: Acquire::cdrom::mount. -r, --rename Rename a disc; change the label of a disc or override the disc's given label. This option will cause apt-cdrom to prompt for a new label. Configuration Item: APT::CDROM::Rename. -m, --no-mount No mounting; prevent apt-cdrom from mounting and unmounting the mount point. Configuration Item: APT::CDROM::NoMount. -f, --fast Fast Copy; Assume the package files are valid and do not check every package. This option should be used only if apt-cdrom has been run on this disc before and did not detect any errors. Configuration Item: APT::CDROM::Fast. -a, --thorough Thorough Package Scan; This option may be needed with some old Debian 1.1/1.2 discs that have Package files in strange places. It takes much longer to scan the CD but will pick them all up. -n, --just-print, --recon, --no-act No Changes; Do not change the sources.list(5) file and do not write index files. Everything is still checked however. Configuration Item: APT::CDROM::NoAct. -h, --help Show a short usage summary. -v, --version Show the program version. -c, --config-file Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this configuration file. If configuration settings need to be set before the default configuration files are parsed specify a file with the APT_CONFIG environment variable. See apt.conf(5) for syntax information. -o, --option Set a Configuration Option; This will set an arbitrary configuration option. The syntax is -o Foo::Bar=bar. -o and --option can be used multiple times to set different options. SEE ALSO
apt.conf(5), apt-get(8), sources.list(5) DIAGNOSTICS
apt-cdrom returns zero on normal operation, decimal 100 on error. BUGS
APT bug page[1]. If you wish to report a bug in APT, please see /usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command. AUTHORS
Jason Gunthorpe APT team NOTES
1. APT bug page http://bugs.debian.org/src:apt APT 1.6.3ubuntu0.1 30 November 2013 APT-CDROM(8)
All times are GMT -4. The time now is 06:21 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy