Centos 5.8 video driver problem Post: 302749893

Sponsored Content

Special Forums Hardware Centos 5.8 video driver problem Post 302749893 by TUX servers on Sunday 30th of December 2012 12:38:22 AM

12-30-2012

Registered User

Centos 5.8 video driver problem

i have an older server from about 2001 i was given. i recently lost the OS drive on the system and dicided to go to linux instead of windows. i have tried open suse, centos and both do just about the same thing. they boot fine then they go into installing drivers it hits vidio driver then another line pops up after that for <=1sec then blanks out. i left it run for about 5 min on both os thinking mayby normal install, but still no video. the chip is a cirus logic cl-gd54m30. i looked all over for drivers for it, but everything is for windows. is there any way i can bypass this and just use the genaric driver it uses when it boots? it's just a home use file server so as long as ther is video it will be fine.

here are some specs on the system if it helps

Code:

unisys aquanta ES: 2000 series 2 dual CPU intel PIII xeon @500 mhz, ram max 1GB, SCSI ultra-2 SE
video= cirus logic cl-gd54m30[-I-AC-A] (part in bracets don't seem to relate to madel# usaly saw it as gd54m30)
SCSI controler= 2X adaptec aic 7890 AB
network= intel sb82558b
IDE controler= apears to be a national PC97307

can anyone tell me how i could bypass this vidio driver loading, or somewhare to look for a linux driver for it or a universal linux vidio driver.
also does anyone think that i'll have isues with any of these other devices?

Last edited by Scrutinizer; 12-30-2012 at 02:45 AM.. Reason: code tags

TUX servers

View Public Profile for TUX servers

Find all posts by TUX servers

7 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

ATI Video Driver

I recent got a Compaq Presario with Vista Installed. I reformatted the drive and loaded Redhat Fedora. It runs well except I can only get 800 X 600 resolution. The motherboard has integrated ATI Radeon Xpress 1100 graphics and I cannot locate a linux driver for that chipset. Any ideas? Thanks....

2. UNIX for Dummies Questions & Answers

problem of networking in centos

Hello, I am using dual boot of linux, one is ubuntu and the other is one is centos. I have three NIC's and only one of them connected with cable. The thing is that when I boot from the ubuntu, it does recognize it and I am connected to the Internet. When I boot from the centos I am not...

3. Ubuntu

Driver problem with Ubuntu 10.10

I have a Dell laptop with Ubuntu 10.10 installed in it. The headphone driver is not supportive in my system but it works really well with other laptops like HP. So my question is that does Ubuntu 10.10 in Dell does not work? Moreover, if i upgrade my system later with 11.04, will the problem...

4. Hardware

Difference between platform driver,codec driver and Machine driver

In general terms what are the differences platform driver,codec driver and Machine driver?

5. Red Hat

Bluetooth problem in CentOS 6

Hi , I have install centos6.3 64bit, other things are working fine.:b: I am trying to use bluetooth. It is showing bluetooth icons and options only turn on and turn off bletooth.:confused: How to enable full features of bluetooth like search, send file etc.:wall:

6. Solaris

Need video driver package for Solaris 11

I'm trying to install Solaris on my laptop for training purposes. It recognizes all the hardware except for the Intel Mobile 4 Series (GMA 4500m) video controller. Wikipedia says that Solaris 11 does support Mobile 4 Series controllers but for some reason it doesn't have the driver for it out...

7. UNIX for Beginners Questions & Answers

Problem with cluster on centos 6.5

Hallo to everyone.From sometime i have problems with my asterisk pbx on cent os which is in corosync cluster mode with resource groups.The problem is for time the cluster just swap the active one with the other and the only messages in \var\log\messages is that bond0:link status defenitly down for...

LEARN ABOUT DEBIAN

nntp-pull

NNTP-PULL(1)							 nntp-pull manual						      NNTP-PULL(1)

NAME

       nntp-pull - fetch articles from the server to the mbox

SYNOPSIS

       nntp-pull [options...] groupname [groupname...]

DESCRIPTION

       Fetch messages from the server and save them into the mailbox (mbox format). Every argument is supposed to be a name of group, optionally
       followed by a '>' character and mbox filename. If the mbox filename is omitted, it defaults to the name of the group.

       Besides global options (described in sinntp(1)), nntp-pull command takes following options:

       --limit=N
	   Pull at most N messages.

       --reget
	   Start from the first available message.

EXAMPLES

       nntp-pull --server=news.example.org --limit=50 'comp.os.linux>os-linux' Fetches at most the 50 newest articles from the newsgroup
       comp.os.linux located on news.example.org server and appends them to the os-linux mailbox file.

       nntp-pull --server=news.example.net --reget --limit=3 comp.os.windows Fetches at most the 3 oldest articles from the newsgroup
       comp.os.windows located on news.example.net server and appends them to the comp.os.windows mailbox file.

SEE ALSO

       sinntp(1)

COPYRIGHT

       Copyright (C) 2009, 2010, 2011 Piotr Lewandowski, Jakub Wilk

nntp-pull 1.5							    2012-04-18							      NNTP-PULL(1)