Sponsored Content
Full Discussion: VIOS LPAR Error 0518
Operating Systems AIX VIOS LPAR Error 0518 Post 302748341 by filosophizer on Tuesday 25th of December 2012 10:09:26 AM
Old 12-25-2012
Happy Holidays everyone,

Okay,

Before I created VIO LPARs , I had 5.3 ML 00 running on the machine on Hdisk0

I installed IBM PowerVM vios on Hdisk1

then created an LPAR_1 == Attachted to this LPAR_1 = HDISK0
booted from LPAR_2 = Everything works fine

Now, created another LPAR ==> LPAR_2
created a virtual disk from disk_pool
attachted the virtual_disk to LPAR_2
attachted the physical CD_ROM to LPAR_2

Booted LPAR_2 in SMS mode
selected install/boot device as CD-ROM and booted from CD-ROM which has the same AIX as HDISK0 which is 5.3 ML 00
but the error occurs

How I attached the virtual disk ?
through web http://vios_server

I cannot put dedicated vscsi because that will need physical SCSI adapters and HMC.

any suggestions ?
 

10 More Discussions You Might Find Interesting

1. AIX

Problem mapping LUN disk from VIOS to the LPAR

Hello guys, It would be so nice of you if someone can provide me with these informations. 1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies

2. AIX

DUAL VIOS & Client LPAR hangs at 25b3

I have a DUAL VIO ( IBM Virtual I/O ) setup on p 570. Two Vio server ( VIOS ) and many LPAR clients. VIO ( latest version + service pack + applied the fix ) and AIX 6.1 ML2 When both VIOs are running, and if I turn on a Client LPAR, the LPAR hangs at LED 25b3 for more than 1 hour then it... (2 Replies)
Discussion started by: filosophizer
2 Replies

3. AIX

VIOS to lpar Mapping

Hello, I have created mapping of 2 virtual adapters for Lpars using following command: mkvdev -vdev ipanalyzerlv1 -vadapter vhost11 mkvdev -vdev ipanalyzerlv -vadapter vhost13 The above two commands were succesfull but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Discussion started by: Vit0_Corleone
3 Replies

4. AIX

LPAR freezes after switching of storage (lpar is mirrored)

Hi all, I have the following configuration 2 ds3524 storage disk systems located over 2 locations 2 P720 server located over 2 locations DS3524 are connected to san switch. Each vio server has 1 fc adapter attached to a san switch. per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies

5. AIX

What's the difference between VIOS and LPAR?

Hi All, Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great. ... (5 Replies)
Discussion started by: itik
5 Replies

6. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios... (0 Replies)
Discussion started by: vilius
0 Replies

7. AIX

List LPAR from VIOS

Hi guys, does anyone know how to get a list of the LPAR running on VIOS? Thanks! (5 Replies)
Discussion started by: cecco16
5 Replies

8. AIX

Moving VIOS, LPAR's, HMC to different subnet

Hi, Just joined to new company with one Power 720 Express (8202-E4C) server and have no much experience with IBM systems. I am trying to move everything I mentioned to different subnet as required by customer contract (currently sitting on same subnet as company lan). Access to this subnet will... (8 Replies)
Discussion started by: spricer
8 Replies

9. AIX

VIOS: Extend virtual disk assigned to running lpar?

Hello, VIOS 2.2.1.4 using IVM. I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user. Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Discussion started by: j_aix
2 Replies

10. UNIX for Advanced & Expert Users

Unable to install client AIX LPAR to vscsi hdisk provided from VIOS

Hi everybody, I have Power5 server with 4 internal hdisks each of 70Gb. VIOS server was installed via Virtual I/O Server Image Repository on the HMC. HMC release - 7.7.0 VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks... (2 Replies)
Discussion started by: Ravil Khalilov
2 Replies
AIC(4)							 BSD/i386 Kernel Interfaces Manual						    AIC(4)

NAME
aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver SYNOPSIS
device aic In /boot/device.hints: hint.aic.0.at="isa" DESCRIPTION
The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips. Many systems that use these controller chips do not have a boot ROM and therefore cannot be booted from. HARDWARE
The adapters supported by the aic driver include: o Adaptec AHA-1505 (ISA) o Adaptec AHA-1510A, AHA-1510B (ISA) o Adaptec AHA-1520A, AHA-1520B (ISA) o Adaptec AHA-1522A, AHA-1522B (ISA) o Adaptec AHA-1535 (ISA) o Creative Labs SoundBlaster SCSI host adapter (ISA) o Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card) o Adaptec AHA-1030B, AHA-1030P (PC98) o NEC PC-9801-100 (PC98) SEE ALSO
aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4) BUGS
The driver does not work well with multiple devices on the SCSI bus. The driver works well with devices like CDROMs and Tape drives. The driver works not so well with disk drives. The PC Card version appears to work better than the ISA version, but that may be due to differing levels of testing of the devices. BSD
November 8, 2003 BSD
All times are GMT -4. The time now is 06:01 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy