Over the last month or so my CentOS server has been crashing for reasons I do not know. It has been running for over a year with regular yum updates without problems. The load on the server is perfectly normal with CPU usage at 5-6% and RAM usage at less than half of 32GB of RAM (multiple smaller game servers run off of this box). I am unsure if this is a software issue at all.
I have pasted my /var/log/messages file around the time of my latest crash all the way up to the crash. Because I am a CentOS newb, this is gibberish to me, so I am curious if anything in the file points to a crash of some kind? Or if there are other logs I could check and paste? If not, it would lead me to believe there is a hardware issue or overheating.
Here is the messages:
Code:
Dec 21 14:58:03 server1 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted)
Dec 21 14:58:03 server1 kernel: Hardware name: X9SCL/X9SCM
Dec 21 14:58:03 server1 kernel: NETDEV WATCHDOG: eth2 (e1000e): transmit queue 0 timed out
Dec 21 14:58:03 server1 kernel: Modules linked in: fuse autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 sg microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
Dec 21 14:58:03 server1 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-279.14.1.el6.x86_64 #1
Dec 21 14:58:03 server1 kernel: Call Trace:
Dec 21 14:58:03 server1 kernel: <IRQ> [<ffffffff8106b7b7>] ? warn_slowpath_common+0x87/0xc0
Dec 21 14:58:03 server1 kernel: [<ffffffff8106b8a6>] ? warn_slowpath_fmt+0x46/0x50
Dec 21 14:58:03 server1 kernel: [<ffffffff81459c0d>] ? dev_watchdog+0x26d/0x280
Dec 21 14:58:03 server1 kernel: [<ffffffff8108caad>] ? insert_work+0x6d/0xb0
Dec 21 14:58:03 server1 kernel: [<ffffffff814599a0>] ? dev_watchdog+0x0/0x280
Dec 21 14:58:03 server1 kernel: [<ffffffff8107e937>] ? run_timer_softirq+0x197/0x340
Dec 21 14:58:03 server1 kernel: [<ffffffff810a23c0>] ? tick_sched_timer+0x0/0xc0
Dec 21 14:58:03 server1 kernel: [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30
Dec 21 14:58:03 server1 kernel: [<ffffffff81073f61>] ? __do_softirq+0xc1/0x1e0
Dec 21 14:58:03 server1 kernel: [<ffffffff81096d60>] ? hrtimer_interrupt+0x140/0x250
Dec 21 14:58:03 server1 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30
Dec 21 14:58:03 server1 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0
Dec 21 14:58:03 server1 kernel: [<ffffffff81073d45>] ? irq_exit+0x85/0x90
Dec 21 14:58:03 server1 kernel: [<ffffffff81506450>] ? smp_apic_timer_interrupt+0x70/0x9b
Dec 21 14:58:03 server1 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20
Dec 21 14:58:03 server1 kernel: <EOI> [<ffffffff812cddbe>] ? intel_idle+0xde/0x170
Dec 21 14:58:03 server1 kernel: [<ffffffff812cdda1>] ? intel_idle+0xc1/0x170
Dec 21 14:58:03 server1 kernel: [<ffffffff8109929d>] ? sched_clock_cpu+0xcd/0x110
Dec 21 14:58:03 server1 kernel: [<ffffffff81407c27>] ? cpuidle_idle_call+0xa7/0x140
Dec 21 14:58:03 server1 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110
Dec 21 14:58:03 server1 kernel: [<ffffffff814f754f>] ? start_secondary+0x22a/0x26d
Dec 21 14:58:03 server1 kernel: ---[ end trace c6b419e0a29214c3 ]---
Dec 21 14:58:03 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:03 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:03 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:58:04 server1 abrtd: Directory 'oops-2012-12-21-14:58:04-2219-0' creation detected
Dec 21 14:58:04 server1 abrt-dump-oops: Reported 1 kernel oopses to Abrt
Dec 21 14:58:04 server1 abrtd: Can't open file '/var/spool/abrt/oops-2012-12-21-14:58:04-2219-0/uid': No such file or directory
Dec 21 14:58:06 server1 kernel: Bridge firewalling registered
Dec 21 14:58:13 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:13 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:13 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:58:14 server1 abrtd: Sending an email...
Dec 21 14:58:14 server1 abrtd: Email was sent to: root@localhost
Dec 21 14:58:14 server1 abrtd: New problem directory /var/spool/abrt/oops-2012-12-21-14:58:04-2219-0, processing
Dec 21 14:58:14 server1 abrtd: Can't open file '/var/spool/abrt/oops-2012-12-21-14:58:04-2219-0/uid': No such file or directory
Dec 21 14:58:23 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:23 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:23 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:58:33 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:33 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:33 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:58:43 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:43 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:43 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:58:53 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:58:53 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:58:53 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:59:03 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:59:03 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:59:03 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 14:59:13 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 14:59:13 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 14:59:13 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Dec 21 15:03:03 server1 kernel: e1000e 0000:02:00.0: eth2: Reset adapter
Dec 21 15:03:03 server1 kernel: e1000e 0000:02:00.0: eth2: Error reading PHY register
Dec 21 15:03:03 server1 kernel: e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Hi
I have a 64bit C++ dynamic component built using Sun Forte compiler(CC) on one server.
I am opening this shared component using dlopen and checking if a particular function is defined or not. After that, when I am closing the component using dlclose, the program is crashing.
The... (3 Replies)
i just started learning to prog in c++, im using netbeans.
i tryed to make a class and i keep getting this error. what am i doing wrong ?
-----------------------------
class test
{
public:
int funtime();
private:
int time;
};
int test::funtime()... (4 Replies)
Hi,
My system is crashing with following error .. i tried to boot from the network and unencapsulated the root disk from SVM .. but still not able to boot the box , can any one point me to some direction .. i do not want to build the box new as of now just want to troubleshoot if possible..
... (3 Replies)
Using Fedora 11, just about every day the system started crashing.
Becomes unresponsive to keyboard/mouse, nothing appears on screen but box is still running.
Still responds to ping, arp address stays alive in the firewall, other than that its unresponsive
Where can I look to find out... (1 Reply)
Hi
I am new to expect. Please if any one can help on my issue its really appreciable. here is my issue:
I want expect script for random passwords and random commands generation.
please can anyone help me?
Many Thanks in advance (0 Replies)
Hi,
Why I am getting 'SIGSEGV' in the following code?
char* p="abcde";
printf("%s", 3); // Segmentation Fault (core dump)
Kindly help me to understand what exactly makes the program to crash or the reason for the crashing. (7 Replies)
Hi, we have some problem with mysql high cpu , would like some help with MySQL Tuning
here are the mysqltuner & tuning-primer details
mysqltuner:
# mysqltuner
>> MySQLTuner 1.1.1 - Major Hayden <major@mhtx.net>
>> Run with '--help' for additional options and output filtering
--------... (1 Reply)
Firefox keeps on crashing every time I try to run it. I tried to create a new profile with no luck. When I try to open up the profile manager firefox crashes. I even deleted my profile folder and tried to start with a new profile. That did not work either. I don't know what the problem could be. I... (6 Replies)
Need to use dd to generate a large file from a sample file of random data. This is because I don't have /dev/urandom.
I create a named pipe then:
dd if=mynamed.fifo do=myfile.fifo bs=1024 count=1024
but when I cat a file to the fifo that's 1024 random bytes:
cat randomfile.txt >... (7 Replies)
12-23-2012