Hi, dear all, I am rather new to Unix and have this problem where I cant seem to ping from 1 host to another. The scenerio is as follows: -
1 QNX host->Eth->1 SCO host
the SCO host is configured with it's IP
the QNX host is configured with another IP
both in the same domain, ie, 172.20.3.XX... (3 Replies)
Hello,
hi guys I don't know what is the problem with my NIC I can ping the Localhost (LOOPBACK) but when I run a scripts to check the NIC statuse it's shown the NIC DOWN sooo what could be the problem and what is the best way to start trouplshooting the NIC in SUN-SOLARIS.
Regards,
Karim
... (3 Replies)
I have Sco openserver 5.0. It had a 125. ip. I changed it to a 192. ip. was unable to ping the 192. I was told to change it in the
etc/tcp
etc/hosts
files which i did. still unable to ping.
i am getting a message unable to route to host.
I also have an error in my etc/tcp file on line... (1 Reply)
DEar all
i am receiving this error on start and then unable to ping
(dlpid): unable to open network adapter driver (/dev/mdi/e3h0)
what to do ? (2 Replies)
We are unable to bring one of our linux boxes into the network once it was restarted. But once we stop and start the network service. We are able to ping the gateway and get into network. After a minute or two we get the following reponse for the ping command
64 bytes from 124.168.215.40:... (6 Replies)
hi,
I setup a Solaris machine in my server room and my client cannot access it. Can anyone advise?
Test that i have done:
-My client pc cannot ping the server.
-My solaris server cannot ping client
-My solaris server can ping it's gateway
-Another NT machine 1 (10.179.30.26) in the server... (2 Replies)
hi,
I setup a Solaris machine in my server room and my client cannot access it. Can anyone advise?
Test that i have done:
-My client pc cannot ping the server.
-My solaris server cannot ping client
-My solaris server can ping it's gateway
-Another NT machine 1 (10.179.30.26) in the... (8 Replies)
Hi ALL,
I Have installed NEW v240 server through hyper terminal, After installation i unable to ping the server from out side server... i can see no entry in resolve.conf file.. but the server has DNS.. willl that issue.. please guide me ping the server from outside within the same network
bk (1 Reply)
Hello,
Am unable to ping the Windows Box, from my Solaris Box.
They both are in same LAN, have the same IP Segments.
Windows IP :: 10.141.14.120
Solaris IP :: 10.141.14.11
Unable to get why isnt working out.... When using the command 'ping 10.141.14.120', it gives the error as 'ping:... (4 Replies)
Hello Everyone,
I have unable to run the default server with localhost in my Debian machine. While trying to run Django I get:
Error: That IP address can't be assigned-to.
error
While trying to run galaxy-dist I get this error:
socket.error: Cannot assign requested address
I can't telnet... (3 Replies)
Discussion started by: sachit adhikari
3 Replies
LEARN ABOUT DEBIAN
sa-check_spamd
SA-CHECK_SPAMD.RAW(1) User Contributed Perl Documentation SA-CHECK_SPAMD.RAW(1)NAME
sa-check_spamd - spamd monitoring script for use with Nagios, etc.
SYNOPSIS
sa-check_spamd [options]
Options:
-c secs, --critical=secs Critical ping response threshold
-h, -?, --help Print usage message
-H hostname, --hostname=hostname Hostname of spamd service to ping
-p port, --port=port Port of spamd service to ping
--socketpath=path Connect to given UNIX domain socket
-t secs, --timeout=secs Max time to wait for a ping response
-v, --verbose Verbose debug output
-V, --version Output version info
-w secs, --warning=secs Warning ping response threshold
DESCRIPTION
The purpose of this program is to provide a tool to monitor the status of "spamd" server processes. spamd is the daemonized version of the
spamassassin executable, both provided in the SpamAssassin distribution.
This program is designed for use, as a plugin, with the Nagios service monitoring software available from http://nagios.org. It might be
compatible with other service monitoring packages. It is also useful as a command line utility or as a component of a custom shell script.
OPTIONS
Options of the long form can be shortened as long as the remain unambiguous (i.e. --host can be used instead of --hostname).
-c secs, --critical=secs
Critical ping response threshold in seconds. If a spamd ping response takes longer than the value specified (in seconds) the program
will exit with a value of 2 to indicate the critical status.
This value must be at least as long as the value specified for warning and less than the value specified for timeout.
-h, -?, --help
Prints this usage message and exits.
-H hostname, --hostname=hostname
The hostname, or IP address, of the spamd service to ping. By default the hostname localhost is used. If --socketpath is set this
value will be ignored.
-p port, --port=port
The port of the spamd service to ping. By default port 783 (the spamd default port number) is used. If --socketpath is set this value
will be ignored.
--socketpath=path
Connect to given UNIX domain socket. Use instead of a hostname and TCP port. When set, any hostname and TCP port specified will be
ignored.
-t secs, --timeout=secs
The maximum time to wait for a ping response. Once exceeded the program will exit with a value of 2 to indicate the critical status.
The default timeout value is 45 seconds. The timeout must be no less than 1 second.
This value must be greater than the values specified for both the critical and warning values.
-v, --verbose
Display verbose debug output on STDOUT.
-V, --version
Display version info on STDOUT.
-w secs, --warning=secs
Warning ping response threshold in seconds. If a spamd ping response takes longer than the value specified (in seconds), and does not
exceed the critical threshold value, the program will exit with a value of 1 to indicate the warning staus.
This value must be no longer than the value specified for critical and less than the value specified for timeout.
EXIT CODES
The program will indicate the status of the spamd process being monitored by exiting with one of these values:
0 OK: A spamd ping response was received within all threshold times.
1 WARNING: A spamd ping response exceeded the warning threshold but not the critical threshold.
2 CRITICAL: A spamd ping response exceeded either the critical threshold or the timeout value.
3 UNKNOWN: An error, probably caused by a missing dependency or an invalid configuration parameter being supplied, occurred in the
sa-check_spamd program.
SEE ALSO spamc(1)spamd(1)spamassassin(1)PREREQUISITES
"Mail::SpamAssassin" version 3.1.1 or higher (3.1.6 or higher recommended)
AUTHOR
Daryl C. W. O'Shea, DOS Technologies <spamassassin@dostech.ca>
LICENSE
sa-check_spamd is distributed under the Apache License, Version 2.0, as described in the file "LICENSE" included with the Apache
SpamAssassin distribution and available at http://www.apache.org/licenses/LICENSE-2.0
perl v5.14.2 2014-02-14 SA-CHECK_SPAMD.RAW(1)