Remove all kernel except 2.6.18-308.24.1.el5 Post: 302747085

5 More Discussions You Might Find Interesting

1. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

2. IP Networking

Mac Filtering in REDHAT-el5

Need help to filter the MAC address for the specific ipaddress., HOW?? I had try the rule for: iptables -A FORWARD -i eth1 -s 192.168.129.57 -m mac --mac-source 00:02:6F:48:8A:85 -j ACCEPT But Not working now and if you have any alternate solution Help us.:confused::confused:

3. Solaris

Which file is read by kernel to set its default system kernel parameters values?

Hi gurus Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value Is it /dev/kmem file or something...

4. Red Hat

Remove older kernel

I upgraded from 2.6.32 to the 2.6.37.4 kernel and i 'm now booted from the new kernel .. but the size of the root file system / is increased substantially due to /usr/src .. and the new kernel is working fyn for us .. so i would like to remove the older kernel .. i tried to remove the 2.6.32...

5. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

LEARN ABOUT ULTRIX

ppmtosixel

ppmtosixel(1)						      General Commands Manual						     ppmtosixel(1)

NAME

       ppmtosixel - convert a portable pixmap into DEC sixel format

SYNOPSIS

       ppmtosixel [-raw] [-margin] [ppmfile]

DESCRIPTION

       Reads  a  portable  pixmap  as input.  Produces sixel commands (SIX) as output.	The output is formatted for color printing, e.g. for a DEC
       LJ250 color inkjet printer.

       If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled.  A printer control header and a color assignment table
       begin the SIX file.  Image data is written in a compressed format by default.  A printer control footer ends the image file.

OPTIONS

       -raw   If  specified,  each  pixel  will  be explicitly described in the image file.  If -raw is not specified, output will default to com-
	      pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands.  A raw file is often an order	of  magni-
	      tude larger than a compressed file and prints much slower.

       -margin
	      If  -margin  is not specified, the image will be start at the left margin (of the window, paper, or whatever).  If -margin is speci-
	      fied, a 1.5 inch left margin will offset the image.

PRINTING

       Generally, sixel files must reach the printer unfiltered.  Use the lpr -x option or cat filename > /dev/tty0?.

BUGS

       Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion.  If the original PPM maxval was
       greater	than  100,  rescaling  also reduces the image depth.  While the actual RGB values from the ppm file are more or less retained, the
       color palette of the LJ250 may not match the colors on your screen.  This seems to be a printer limitation.

SEE ALSO

       ppm(5)

AUTHOR

       Copyright (C) 1991 by Rick Vinci.

								   26 April 1991						     ppmtosixel(1)