How about:-
This should fire them off and wait for all you background processes to finish before returning control. You can then read the log files to see what you got.
Be careful, as it will wait for all background processes, so if you were to set up a quick check from the same session and did a
... and then ran your script, it would wait until your tail had completed.
Hi ,
I am having one situation in which I need to run some simple unix commands after doing "chroot" command in a shell script. Which in turn creates a new shell.
So scenario is that
- I need to have one shell script which is ran as a part of crontab
- in this shell script I need to do a... (2 Replies)
hi,
As you know, in Windows Programming, in WinMain method you will give n argument which you can know if this is another instance of the application or just the fresh execution.
How this functionality can be achieved in Linux application? Most of suggestions i have seen here in threads are... (5 Replies)
The thing that we need to be able to do is:
- Scanning tapes from failed backup jobs with bscan (a bacula command)
- loading the next tape with the mtx command
Bscan does unload tapes but does not load them.
Bscan comes with this message when it's done with a tape:
Mount Volume... (0 Replies)
Hi
I am trying to send a command over ssh with a parameter but the shell fails to expand the command properly any ideas what am i doing wrong with this.
This is ssh on AIX
for i in 71 72 73 74 75 do
for server in server1 server2 do
somestr="Some String"
echo "$server... (3 Replies)
the ssh calling convention:
ssh <server>
If I put commands in the section, ssh will execute them immediately after logging in and return to local shell. I want to stay in the remote shell after executing these commands. How can I achieve this?
Thanks for all. (1 Reply)
Hi SSHers,
I have embedded this below code in my shell script..
/usr/bin/ssh -t $USER@$SERVER1 /usr/bin/ssh $USER2@S$SERVER2 echo uptime:`/opt/OV/bin/snmpget -r 0 -t 60 $nodeName system.3.0 | cut -d: -f3-5`
SSH to both these servers are public-key authenticated, so things run... (13 Replies)
Hi,
I work on a jumpserver and I wrote a script to transfer a file from source server to destination server.
#!/bin/ksh
echo "\nEnter the file name:\n"
read name
echo "\nSelect the Source server\n"
echo "1. ODS PROD "
echo "2. ODS DROPBOX"
echo "3. ODS STE"
echo "4. ODS STE DROPBOX"... (6 Replies)
I have some commands which need to be executed in remote machine.
I have Linux Server from where I need to connect to Solaris server using ssh and then declare some variable over there and run some commands. I don't want to call a script which is present in Solaris server from Linux server... (7 Replies)
Hi,
I'm tryin to write a script that will collect information about a remote servers, put them into variables and print them to screen.
# /usr/bin/bash
ls $1 > /dev/null 2>/dev/null
if
then
echo "$1 is file"
for server in $(cat $1)
do
# echo $server
... (5 Replies)
Hi
Am having file.ksh as below
wc -l file1.txt
wc -l file2.txt
wc -l file3.txt
wc -l file4.txt
i want all the commands in this file to execute in same time
please help
Thanks in advance (1 Reply)
Discussion started by: ragu.selvaraj
1 Replies
LEARN ABOUT ULTRIX
ntp.conf
ntp.conf(5) File Formats Manual ntp.conf(5)Name
ntp.conf - Network Time Protocol configuration file
Description
The file is the configuration file for the Network Time Protocol (NTP) daemon, This file must be configured on your system before running
Any host names that you specify in the file must have an entry in the file, or an entry in the master database, if the database is being
served to your system by BIND/Hesiod or Yellow Pages.
The file has four entry formats:
trusting no
This entry guarantees that your system synchronizes only to the NTP servers identified in the peer and server entries specified. Dig-
ital recommends that all systems include the entry.
peer server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system may also provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP servers should be configured with entries.
server server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system can not provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP clients should be configured with entries.
peer /dev/null LOCL 1 -5 local
This entry identifies your system as a local reference clock. A local reference clock is the most accurate system clock available at
your site. If you receive time synchronization from the Internet NTP service, you should not include this entry on any of your sys-
tems. At most, one system in a set of nodes running should be identified as a local reference clock.
A host which specifies this entry should not specify any or entries.
Examples
This is a sample configuration file for an NTP client which receives time synchronization from the NTP servers: and Lines beginning with a
number sign (#) are comments.
#
# NTP Configuration File
# This file is mandatory for the ntpd daemon
#
#
#
# ** A L L **
#
# "trusting no" prevents this host from synchronizing
# to any host that is not listed below. It is recommended
# that all hosts include the line "trusting no".
#
trusting no
#
#
# ** S E R V E R **
#
# If you are configuring a server, use "peer" entries to
# synchronize to other NTP servers. For example, server1,
# server2, and server3.
#
#peer server1
#peer server2
#peer server3
#
#
#
#
# ** C L I E N T **
#
# If you are configuring a client, use "server" entries to
# synchronize to NTP servers. For example, server1, server2,
# and server3.
#
server server1
server server2
server server3
#
#
#
# ** L O C A L R E F E R E N C E C L O C K **
#
# If you are configuring a local reference clock, include the
# following entry and the "trusting no" entry ONLY.
#
#peer /dev/null LOCL 1 -5 local
#
See Alsontp(1), ntpd(8), ntpdc(8)
RFC 1129--Internet time synchronization: The Network Time Protocol
Introduction to Networking and Distributed System Services
ntp.conf(5)