Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I have a DUAL VIO ( IBM Virtual I/O ) setup on p 570.
Two Vio server ( VIOS ) and many LPAR clients.
VIO ( latest version + service pack + applied the fix ) and AIX 6.1 ML2
When both VIOs are running, and if I turn on a Client LPAR, the LPAR hangs at LED 25b3 for more than 1 hour then it... (2 Replies)
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
Hi,
Just joined to new company with one Power 720 Express (8202-E4C) server and have no much experience with IBM systems.
I am trying to move everything I mentioned to different subnet as required by customer contract (currently sitting on same subnet as company lan). Access to this subnet will... (8 Replies)
Hello,
VIOS 2.2.1.4 using IVM.
I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user.
Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Hi everybody,
I have Power5 server with 4 internal hdisks each of 70Gb.
VIOS server was installed via Virtual I/O Server Image Repository on the HMC.
HMC release - 7.7.0
VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks... (2 Replies)
Discussion started by: Ravil Khalilov
2 Replies
LEARN ABOUT DEBIAN
imager::qrcode
Imager::QRCode(3pm) User Contributed Perl Documentation Imager::QRCode(3pm)NAME
Imager::QRCode - Generate QR Code with Imager using libqrencode
SYNOPSIS
use Imager::QRCode;
my $qrcode = Imager::QRCode->new(
size => 2,
margin => 2,
version => 1,
level => 'M',
casesensitive => 1,
lightcolor => Imager::Color->new(255, 255, 255),
darkcolor => Imager::Color->new(0, 0, 0),
);
my $img = $qrcode->plot("blah blah");
$img->write(file => "qrcode.gif");
# or instance method
use Imager::QRCode qw(plot_qrcode);
my $img = plot_qrcode("blah blah", \%params);
$img->write(file => "qrcode.gif");
DESCRIPTION
This module allows you to generate QR Code with Imager. This module use libqrencode '2.0.0' and above.
METHODS
new
$qrcode = Imager::QRCode->new(%params);
The "new()" constructor method instantiates a new Imager::QRCode object. "new()" accepts the following parameters.
o "size" - Horizontal and vertical size of module(dot). Default is 4.
o "margin" - Margin size of QR Code. Default is 3.
o "level" - Error collectin level. Valid values are 'M', 'L', 'Q' or 'H'. Default is 'L'.
o "version" - Version of the symbol. If specify '0', this module chooses the minimum version for the input data. Default is '0'.
o "mode" - Encoding mode. Valid values are 'numerical', 'alpha-numerical', '8-bit' or 'kanji'. Default is '8-bit'.
If not give "casesensitive" then should be given "mode". If 'kanji' is given, characters will be encoded as Shift-JIS characters.
If '8-bit' is given, all of non-alpha-numerical characters will be encoded as is. If you want to embed UTF-8 string, choose
'8-bit'.
o "casesensitive" - If your application is case-sensitive using 8-bit characters, set to '1'. Default is '0'.
plot($text)
$img = $qrcode->plot("blah blah");
Create a new QR Code image. This method returns Imager object ploted QR Code with the given text.
INSTANT METHODS
plot_qrcode($text, \%params)
Instant method. $text is input text. %params is same parameter as "new()".
SEE ALSO
"Imager", "http://www.qrcode.com/", "http://megaui.net/fukuchi/works/qrencode/index.en.html"
AUTHOR
Yoshiki KURIHARA "<kurihara __at__ cpan.org>"
THANKS
Tokuhiro Matsuno
LICENCE AND COPYRIGHT
Copyright (c) 2011, Yoshiki KURIHARA "<kurihara __at__ cpan.org>".
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perlartistic.
perl v5.14.2 2012-12-16 Imager::QRCode(3pm)