Incompatiblity of the code due to CC compiler version mismatch.
Incompatiblity of the code due to CC compiler version mismatch.
I have a machine with
Code:
Machine A-- Operating System:SunOs 5.8 Generic_117350-45 sun4u sparc SUNW,Ultra-80(solaris 5.8)
CC Compiler:CC: WorkShop Compilers 4.2 16 Jun 1998 C++ 4.2 patch 104631-07
we have compiled C++ code, generated .so files are working fine on the Machine C --
Machine C)Operating System:5.10 Generic_147440-03 sun4v sparc sun4v(Solaris 5.10)
Machine B -- Operating System:5.8 Generic_Virtual sun4v sparc sun4v
CC Compiler:CC:CC: Sun C++ 5.8 2005/10/13
we have compiled C++ code, generated .so files are not working fine on the Machine C
Machine C -- Operating System:5.10 Generic_147440-03 sun4v sparc sun4v(Solaris 5.10)
I would like to know
1) If the code compiled with compiler on Machine A is compatable on Machine C.why the code compiled on Machine B incompatable on Machine C.
2)Machine A and Machine B are with the same SunOs 5.8 version but with a different CC compiler version.we suspect the CC compiler version mismatch on the machines A and B is the cause of the problem.
Expecting solution so that we could able to run the code on Machine C with the compiler available in Market(WorkShop Compilers 4.2 16 Jun 1998 C++ 4.2 patch 104631-07 was not found)
any solution to the problem is helpful and appreciable.Thanks in advance.
I want to use calls from the X Keyboard Extension, but get "library version mismatch" error.
First one is XkbLibraryVersion(..). This one already returns false.
Then I call XkbOpenDisplay(...) which does not return a valid display; return value is XkbOD_NonXkbServer. If I open the display with... (0 Replies)
Command to get the Compiler version(xlc/gcc) from the binary on AIX platform.
I m searching for the Command, to get the Compiler(xlc/gcc) used to build the binary on AIX.
I got two commands used on Linux Platform:
- readelf -a <lib> | grep comment
- hexdump -C -s 0x49e7b -n 1812 <lib>
... (1 Reply)
Hi all.
I have a simple question.
There's a way to install under AIX system (5.3) two different compiler version, i.e. ibm xlf fortran 11 and 12?
Seems that smitty doesn't allows user to change the default installation path; it only allows you to save the replaced files of the superseded... (1 Reply)
:confused: I installed latest version of java ( jre 1.6) on Solaris Machine ......when I run java -version as root, shows the latest version but when I run java -version as normal user, shows the old / previous version
What should I do to fix this ...should show the latest version... (3 Replies)
Hi,
I'm new, here, and I'm searching for a simple solution for a simple problem.
I'm working on RedHat 4.4.6-4 through a CentOS Virtual Machine and due to some reasons I must compile my C++ codes with these two different g++ versions: 4.4.6 and 4.2.2.
The fact is that I should be able to... (4 Replies)
Hi,
Below is output of lslpp command.
bash-3.00# lslpp -L | grep xlC
xlC.aix50.rte 11.1.0.1 C F XL C/C++ Runtime for AIX 5.3
xlC.cpp 9.0.0.0 C F C for AIX Preprocessor
xlC.msg.en_US.cpp 9.0.0.0 C F C for AIX... (2 Replies)
Hi all,
currently I'm facing a issue in linking a .so file.
In my build machine, I've libcrypto.so.6 and there is a softlink as libcrypto.so.
In my make file I'm trying to link to the lib using -L -lcrypto and it is success and created my test.exe.
When I copy this test.exe to other... (4 Replies)
rsync --delay-updates -F --compress --archive --rsh='/usr/bin/ssh -t -a -x' /web/admin/Transfer/data/ user1@destserver1:/tmp/testf
rsync version on sender server is:3.0.9
rsync version on sender server is:3.0.6
Linux sourceserver1 3.10.0-693.17.1.el7.x86_64 #1 SMP Sun Jan 14 10:36:03 EST... (1 Reply)
Discussion started by: mohtashims
1 Replies
LEARN ABOUT OSF1
config
config(8) System Manager's Manual config(8)NAME
config - Builds system configuration files
SYNOPSIS
/sys/conf/config [-k] [-p] [-q] system_name
FLAGS
Creates a define variable 'KDEBUG' that can be used to conditionally compile source code for kernel debugging. Configure the system for
profiling. You must have sources to use this flag. Concatenates and displays all the system configuration files, including any configura-
tion files described in the /sys/conf/NAME.list file.
DESCRIPTION
The doconfig command calls the config command to build a set of system configuration files from a file that describes the sort of system
that is being configured. The config command also takes as input another file that tells it what files are needed to generate a system.
This other file can be augmented by a configuration-specific set of files that name alternate files for a specific machine.
Normally, you should run the doconfig program and not the config command. If you need to issue the config command, be sure to change your
directory to the /sys/conf directory. As an argument to the config command, specify the name of a system configuration file containing
device specifications, configuration options and other system parameters for that specific system configuration. The config command places
all its output files in the directory
The output of config consists of a number of files; each machine type has its own specific set of files. All machine types have a makefile
which is used by make during the system build. Typically, there are also a set of header files which contain definitions of the number of
various devices that will be compiled into the system, and a set of swap configuration files contain definitions for the disk areas to be
used for swapping, the root file system, argument processing, and system dumps.
After running config, you run make depend in the directory where the new makefile was created.
If any other error messages are produced by config, the problems in the configuration file should be corrected and config should be run
again. Attempts to compile a system that had configuration errors are likely to be unsuccessful.
NOTES
The line numbers reported in error messages are usually off by one.
FILES
List of common files used to build the system List of files specific to NAME, where NAME is the value specified for the ident option in the
system configuration file Machine-independent portion of the makefile template used for building kernels from binaries Machine-independent
portion of the makefile template used for building kernels from sources Machine-dependent portion of the makefile template List of machine-
specific files Machine-specific name to major device mapping file
RELATED INFORMATION
Commands: make(1), doconfig(8)
System Administration delim off
config(8)
12-07-2012
Incompatiblity of the code due to CC compiler version mismatch.
