Are you talking about /ora00 filesystem which is on ASM?
If yes, vg01a has /ora00 filesystem so you can export it as same as the normal way below.
and then remap the luns to new HW and import vg01a.
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Hi everyone,
I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?
At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
hi all
just installed the netsec.options.tcpwrapper from expansion pack, which used to be a rpm, for my aix 6.1 test box.
it is so unpredictable. i set up the hosts.deny as suggested for all and allow the sshd for specific ip addresses/hostnames.
the tcpdchk says the hosts allowed and... (0 Replies)
I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns.
Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong)
1.... (0 Replies)
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Am trying to copy a tar file onto a series of remote hosts and untar it at the destination. Need to do this without having to do multiple ssh.
Actions to perform within a single ssh session via shell script
- copy a file
- untar at destination (remote host)
OS : Linux RHEL6 (3 Replies)
Discussion started by: sankasu
3 Replies
LEARN ABOUT DEBIAN
tspi_key_convertmigrationblob
Tspi_Key_ConvertMigrationBlob(3) Library Functions Manual Tspi_Key_ConvertMigrationBlob(3)
TCG Software Stack Developer's Reference
NAME
Tspi_Key_ConvertMigrationBlob - create a wrapped key from a migration blob
SYNOPSIS
#include <tss/platform.h>
#include <tss/tcpa_defines.h>
#include <tss/tcpa_typedef.h>
#include <tss/tcpa_struct.h>
#include <tss/tss_typedef.h>
#include <tss/tss_structs.h>
#include <tss/tspi.h>
TSS_RESULT Tspi_Key_ConvertMigrationBlob(TSS_HKEY hKeyToMigrate, TSS_HKEY hParentKey,
UINT32 ulRandomLength, BYTE* rgbRandom,
UINT32 ulMigrationBlobLength, BYTE* rgbMigrationBlob);
DESCRIPTION
Tspi_Key_ConvertMigrationBlob takes the migration blob built by Tspi_Key_CreateMigrationBlob using the migration scheme TSS_MS_MIGRATE and
creates a normal wrapped key. The resulting normal wrapped key blob is stored in the instance associated with hKeyToMigrate and may be re-
trieved from that instance by Tspi_GetAttribData.
PARAMETERS
hKeyToMigrate
The handle of the key object to convert.
hParentKey
Handle to the parent key related to the key addressed by hKeyToMigrate.
ulRandomLength
Length of random data provided at the parameter rgbRandom.
rgbRandom
Random data as returned together with the migration blob by the method Tspi_Key_CreateMigrationBlob.
ulMigrationBlobLength
Length of the migration blob data provided at the parameter rgbMigrationBlob.
rgbMigrationBlob
Migration blob data as returned by a previously called method Tspi_Key_CreateMigrationBlob.
RETURN CODES
Tspi_Key_ConvertMigrationBlob returns TSS_SUCCESS on success, otherwise one of the following values is returned:
TSS_E_INVALID_HANDLE
hKeyToMigrate or hParentKey is not a valid handle.
TSS_E_INTERNAL_ERROR
An internal SW error has been detected.
TSS_E_BAD_PARAMETER
One or more parameters is bad.
CONFORMING TO
Tspi_Key_ConvertMigrationBlob conforms to the Trusted Computing Group Software Specification version 1.1 Golden
SEE ALSO Tspi_Key_LoadKey(3), Tspi_Key_UnloadKey(3), Tspi_Key_CertifyKey(3), Tspi_Key_CreateMigrationBlob(3).
TSS 1.1 2004-05-25 Tspi_Key_ConvertMigrationBlob(3)