Are you talking about /ora00 filesystem which is on ASM?
If yes, vg01a has /ora00 filesystem so you can export it as same as the normal way below.
and then remap the luns to new HW and import vg01a.
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Hi everyone,
I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?
At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
hi all
just installed the netsec.options.tcpwrapper from expansion pack, which used to be a rpm, for my aix 6.1 test box.
it is so unpredictable. i set up the hosts.deny as suggested for all and allow the sshd for specific ip addresses/hostnames.
the tcpdchk says the hosts allowed and... (0 Replies)
I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns.
Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong)
1.... (0 Replies)
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Am trying to copy a tar file onto a series of remote hosts and untar it at the destination. Need to do this without having to do multiple ssh.
Actions to perform within a single ssh session via shell script
- copy a file
- untar at destination (remote host)
OS : Linux RHEL6 (3 Replies)
Discussion started by: sankasu
3 Replies
LEARN ABOUT DEBIAN
tspi_key_createmigrationblob
Tspi_Key_CreateMigrationBlob(3) TCG Software Stack Developer's Reference Tspi_Key_CreateMigrationBlob(3)NAME
Tspi_Key_CreateMigrationBlob - create a key blob suitable for migrating to another TPM.
SYNOPSIS
#include <tss/platform.h>
#include <tss/tcpa_defines.h>
#include <tss/tcpa_typedef.h>
#include <tss/tcpa_struct.h>
#include <tss/tss_typedef.h>
#include <tss/tss_structs.h>
#include <tss/tspi.h>
TSS_RESULT Tspi_Key_CreateMigrationBlob(TSS_HKEY hKeyToMigrate, TSS_HKEY hParentKey,
UINT32 ulMigTicketLength, BYTE* rgbMigTicket,
UINT32* pulRandomLength, BYTE** prgbRandom,
UINT32* pulMigrationBlobLength, BYTE** prgbMigrationBlob);
DESCRIPTION
Tspi_Key_CreateMigrationBlob returns a key blob containing an encrypted section, which will be different depending on the migration scheme
indicated within the migration ticket previously created by the method Tspi_TPM_AuthorizeMigrationTicket().
PARAMETERS
hKeyToMigrate
Handle of the key object to migrate.
hParentKey
Handle to the parent key related to the key addressed by hKeyToMigrate.
ulMigTicketLength
The length (in bytes) of the rgbMigTickey parameter.
rgbMigTicket
Pointer to memory containing the migration ticket (migration public key and its authorization digest).
pulRandomLength
On successful completion this parameter returns the random data length returned at the parameter prgbRandom.
prgbRandom
On successful completion this parameter returns the random data.
pulMigrationBlobLength
On successful completion this parameter returns the length of the migration blob data returned at the parameter prgbMigrationBlob.
prgbMigrationBlob
On successful completion this parameter returns the migration data blob.
RETURN CODES
Tspi_Key_CreateMigrationBlob returns TSS_SUCCESS on success, otherwise one of the following values are returned:
TSS_E_INVALID_HANDLE - Either hKeyToMigrate, hParentKey or rgbMigTicket are invalid parameters.
TSS_E_BAD_PARAMETER - One of the passed parameters is wrong.
TSS_E_KEY_NO_MIGRATION_POLICY - No migration policy picked.
TSS_E_INTERNAL_ERROR - An error occurred internal to the TSS.
CONFORMING TO
Tspi_Key_CreateMigrationBlob conforms to the Trusted Computing Group Software Specification version 1.1 Golden
SEE ALSO Tspi_Key_CreateKey(3), Tspi_Key_CertifyKey(3).
TSS 1.1 2004-05-26 Tspi_Key_CreateMigrationBlob(3)