Sponsored Content
Full Discussion: SAN Migration of HP-UX hosts
Operating Systems HP-UX SAN Migration of HP-UX hosts Post 302739747 by Joseph_TKLee on Tuesday 4th of December 2012 11:18:07 PM
Old 12-05-2012
Are you talking about /ora00 filesystem which is on ASM?
If yes, vg01a has /ora00 filesystem so you can export it as same as the normal way below.
Code:
 
# umount /ora00
# vgexport -pvs -m /tmp/vg01a.map /dev/vg01a
# vgchange -a n vg01a

and then remap the luns to new HW and import vg01a.

Cheers,
 

10 More Discussions You Might Find Interesting

1. HP-UX

SAN migration

Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch. Any... (0 Replies)
Discussion started by: Hils
0 Replies

2. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Discussion started by: si_linux
2 Replies

3. AIX

aix tcp wrappers hosts.allow hosts.deny?

hi all just installed the netsec.options.tcpwrapper from expansion pack, which used to be a rpm, for my aix 6.1 test box. it is so unpredictable. i set up the hosts.deny as suggested for all and allow the sshd for specific ip addresses/hostnames. the tcpdchk says the hosts allowed and... (0 Replies)
Discussion started by: wf201626
0 Replies

4. Solaris

Need Help On Solaris Cluster Steps For San Migration

I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns. Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong) 1.... (0 Replies)
Discussion started by: sunshinedeepu
0 Replies

5. AIX

SAN Migration

Hi all, We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP. Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies

6. HP-UX

SAN Migration question

Hi, I am very new to HP-UX, and we're going to be doing a SAN migration. We're going to take down the machine, and zone it to the new SAN. My question is, will the device names change and will that interfere with the LVM? If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies

7. Red Hat

Volume group not activated at boot after SAN migration

I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Discussion started by: rbatte1
4 Replies

8. AIX

AIX - FC Switch migration, SAN Migration question!

I'm New to AIX / VIOS We're doing a FC switch cutover on an ibm device, connected via SAN. How do I tell if one path to my remote disk is lost? (aix lvm) How do I tell when my link is down on my HBA port? Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies

9. Solaris

How to identify if disk is attached to SAN and assist in migration.?

I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX. it has one ldom created on it luxadm probe output --- No Network Array enclosures found in /dev/es Found Fibre Channel device(s): Node... (7 Replies)
Discussion started by: kpatel786
7 Replies

10. Solaris

How to copy a tar file on a series of remote hosts and untar it on those hosts?

Am trying to copy a tar file onto a series of remote hosts and untar it at the destination. Need to do this without having to do multiple ssh. Actions to perform within a single ssh session via shell script - copy a file - untar at destination (remote host) OS : Linux RHEL6 (3 Replies)
Discussion started by: sankasu
3 Replies
UMOUNT(8)						    BSD System Manager's Manual 						 UMOUNT(8)

NAME
umount -- unmount filesystems SYNOPSIS
umount [-fv] special | node umount -a | -A [-fv] [-h host] [-t type] DESCRIPTION
The umount command calls the unmount(2) system call to remove a special device or the remote node (rhost:path) from the filesystem tree at the point node. If either special or node are not provided, the appropriate information is taken from the list of filesystems provided by getfsent(3). The options are as follows: -a All the filesystems described via getfsent(3) are unmounted. -A All the currently mounted filesystems except the root are unmounted. -f The filesystem is forcibly unmounted. Active special devices continue to work, but all other files return errors if further accesses are attempted. The root filesystem cannot be forcibly unmounted. -h host Only filesystems mounted from the specified host will be unmounted. This option implies the -A option and, unless otherwise speci- fied with the -t option, will only unmount NFS filesystems. -t type Is used to indicate the actions should only be taken on filesystems of the specified type. More than one type may be specified in a comma separated list. The list of filesystem types can be prefixed with ``no'' to specify the filesystem types for which action should not be taken. For example, the umount command: umount -a -t nfs,hfs umounts all filesystems of the type NFS and HFS. -v Verbose, additional information is printed out as each filesystem is unmounted. NOTES
Due to the complex and interwoven nature of Mac OS X, umount may fail often. It is recommended that diskutil(1) (as in, ``diskutil unmount /mnt'') be used instead. SEE ALSO
unmount(2), getfsent(3), mount(8), diskutil(1) HISTORY
A umount command appeared in Version 6 AT&T UNIX. 4th Berkeley Distribution May 8, 1995 4th Berkeley Distribution
All times are GMT -4. The time now is 12:55 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy