TPCTL(8)						    BSD System Manager's Manual 						  TPCTL(8)

NAME

     tpctl -- touch panel calibration utility

SYNOPSIS

     tpctl [-D dispdevname] [-d devname] [-f filename] [-hnuv]

DESCRIPTION

     tpctl is a touch panel calibration utility.  tpctl calibrates a touch panel and saves and restores the calibration parameters into/from a
     parameter database file.

     Available command-line flags are:
     -D dispdevname   Specify display device name.
     -d devname       Specify touch panel device name.
     -f filename      Specify alternate parameter database file name.
     -h 	      Print brief description.
     -n 	      Do not change the parameter database file.
     -u 	      Force calibration.  Without this flag, tpctl won't do calibration if the database file already contains parameters for the
		      touch panel.
     -v 	      Verbose mode.

     You calibrate the touch panel the first time you run tpctl.  If you see a cross cursor on the screen, you should tap the center of the cursor
     to calibrate the touch panel, or you can abort the calibration with the 'ESC' key.  Five cursors will appear on the screen in turn.  Once
     calibration is done, tpctl saves the calibration parameters into the database file and uses the saved parameters to calibrate the touch
     panel.

     You can run tpctl automatically with /etc/rc.d/tpctl.

FILES

     /etc/tpctl.dat  The default calibration parameter database file.  The -f flag may be used to specify an alternate database file name.  tpctl
		     will create an empty database file if it doesn't exist.
     /dev/ttyE0      The default display device, which is used to display the cursor during calibration.  The -D flag may be used to specify an
		     alternate display device name.  The display device must provide the 'hpcfb' interface as defined in
		     /usr/include/dev/hpc/hpcfbio.h.
     /dev/wsmux0     The default touch panel device.  The -d flag may be used to specify an alternate touch panel device name.

SEE ALSO

     rc.conf(5)

BUGS

     tpctl isn't available on all ports because it requires a display device which provides the 'hpcfb' interface.

BSD
								  August 25, 2002							       BSD