12-03-2012
Thank you.
---------- Post updated at 09:53 AM ---------- Previous update was at 09:47 AM ----------
Joseph,
What would be the steps if the luns are not under volume groups - say if they are under ASM?
Thanks,
10 More Discussions You Might Find Interesting
1. HP-UX
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Discussion started by: Hils
0 Replies
2. Solaris
Hi everyone,
I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?
At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Discussion started by: si_linux
2 Replies
3. AIX
hi all
just installed the netsec.options.tcpwrapper from expansion pack, which used to be a rpm, for my aix 6.1 test box.
it is so unpredictable. i set up the hosts.deny as suggested for all and allow the sshd for specific ip addresses/hostnames.
the tcpdchk says the hosts allowed and... (0 Replies)
Discussion started by: wf201626
0 Replies
4. Solaris
I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns.
Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong)
1.... (0 Replies)
Discussion started by: sunshinedeepu
0 Replies
5. AIX
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies
6. HP-UX
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
7. Red Hat
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Discussion started by: rbatte1
4 Replies
8. AIX
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies
9. Solaris
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Discussion started by: kpatel786
7 Replies
10. Solaris
Am trying to copy a tar file onto a series of remote hosts and untar it at the destination. Need to do this without having to do multiple ssh.
Actions to perform within a single ssh session via shell script
- copy a file
- untar at destination (remote host)
OS : Linux RHEL6 (3 Replies)
Discussion started by: sankasu
3 Replies
SPLIT(1) FSF SPLIT(1)
NAME
split - split a file into pieces
SYNOPSIS
split [OPTION] [INPUT [PREFIX]]
DESCRIPTION
Output fixed-size pieces of INPUT to PREFIXaa, PREFIXab, ...; default PREFIX is `x'. With no INPUT, or when INPUT is -, read standard
input.
Mandatory arguments to long options are mandatory for short options too.
-a, --suffix-length=N
use suffixes of length N (default 2)
-b, --bytes=SIZE
put SIZE bytes per output file
-C, --line-bytes=SIZE
put at most SIZE bytes of lines per output file
-l, --lines=NUMBER
put NUMBER lines per output file
--verbose
print a diagnostic to standard error just before each output file is opened
--help display this help and exit
--version
output version information and exit
SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.
AUTHOR
Written by Torbjorn Granlund and Richard M. Stallman.
REPORTING BUGS
Report bugs to <bug-coreutils@gnu.org>.
COPYRIGHT
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
SEE ALSO
The full documentation for split is maintained as a Texinfo manual. If the info and split programs are properly installed at your site,
the command
info split
should give you access to the complete manual.
split (coreutils) 4.5.3 February 2003 SPLIT(1)